Department of Mechanical Engineering
≡
Home
About
History
Management Team
Members
Faculty Members
Current Students
Graduated Students
Student Statistics
Research
Research Institutes
Sun-Air Research Institute
Research Laboratories
Vibration and Modal Analysis laboratory (VMA)
Center of Advanced Rehabilitation and Robotics Research (FUM-CARE)
CAD/CAM Laboratory
High Performance Computing Laboratory (HPCLab)
Fatigue and Fracture Laboratory
Micro/Nano Fluidics
Current Research Plans
Current Theses
Publications
English Journal Articles
Persian Journal Articles
Books
Article Title
Author(s)
Publication Date
The Development of a Computer Program for Cam and Follower Design
Mohammad Hossein Abolbashari
1993-2
Structural Similitude and Scaling Laws for Laminated Structures
Jalil Rezaee Pazhand
1993-7
Development of the maDR method
Mehran Kadkhodayan
1994-7
A consistent DXDR method for elastic-plastic problems
Mehran Kadkhodayan
1995-1
Structural Similitude and Scaling Laws for Cross-Ply Laminated Plates
Jalil Rezaee Pazhand
1995-2
An Investigation of Nucleating Flows of Steam in a Cascade of Turbine Blading-Theoretical Treatment
Mohammad Reza Mahpeykar
1995-3
Design of scaled down models for stability of laminated plates
Jalil Rezaee Pazhand
1995-3
Use of Scaled Down Models for Predicting Vibration Response of Laminated Plates
Jalil Rezaee Pazhand
1995-4
Solving The Combined part Sequencing And Tool Replacement Problem For an Automated Machining Center: a Tabu Search Approach
Farhad Kolahan
1995-5
A dynamic offsetting approach to tool path generation for machining convex pockets
Farhad Kolahan
1996-1
A tabu search approach to optimization of drilling operations
Farhad Kolahan
1996-1
Design of Scaled Down Models for Predicting Shell Vibrational Response
Jalil Rezaee Pazhand
1996-1
On the spreading and solidification of molten particles in a plasma spray process: effect of thermal contact resistance
Mohammad Passandideh-Fard
1996-1
The generalized Laplace equation of capillarity I. Thermodynamic and hydrostatic considerations of the fundamental equation for interfaces
Mohammad Passandideh-Fard
1996-1
The generalized Laplace equation of capillarity II. Hydrostatic and thermodynamic derivations of the Laplace equation for high curvatures
Mohammad Passandideh-Fard
1996-1
A direct method to derive the boundary conditions of the homogenization equations for symmetric cells
Behrooz Hassani
1996-2
Forth at a Glance
Mohammad Hossein Abolbashari
1996-2
Capillary effects during droplet impact on a solid surface
Mohammad Passandideh-Fard
1996-3
A Stochastic system approach to Fatigue reliability- an application to Ti-6Al-4V
Khalil Farhangdoost
1996-4
Scale models for laminated cylindrical shells subjected to axial compression
Jalil Rezaee Pazhand
1996-4
Numerical predictions of the carbon burnout performance of coal-fired non-slagging vertical cyclone combustors
Mohammad Moghiman
1996-5
On the performance of a cascade of turbine rotor tip section blading in nucleating steam Part3: theoretical treatment
Mohammad Reza Mahpeykar
1997-1
Structural similitude for vibration response of laminated cylindrical shells with double curvature
Jalil Rezaee Pazhand
1997-1
Scaled Models For Laminated Cylindrical Shells Subjected to External Pressure
Jalil Rezaee Pazhand
1997-2
A simple algorithm for stamping circular plates by hemispherical punches
Mehran Kadkhodayan
1997-6
Analyses of wrinkling and buckling of elastic plates by DXDR method
Mehran Kadkhodayan
1997-11
An improved process simulation system for ball-end milling of sculptured surfaces
Behnam Moetakef Imani
1998-1
Deposition of tin droplets on a steel plate: simulations and experiments
Mohammad Passandideh-Fard
1998-1
An adaptive TS approach to JIT sequencing with variable processing times and sequence-dependent setups
Farhad Kolahan
1998-8
A review of homogenization and topology opimization II—analytical and numerical solution of homogenization equations
Behrooz Hassani
1998-12
A review of homogenization and topology optimization I- homogenization theory for media with periodic structure
Behrooz Hassani
1998-12
A review of homogenization and topology optimization III—topology optimization using optimality criteria
Behrooz Hassani
1998-12
Ignition of epoxy by a high radiation Source, A Numerical Study
Javad Abolfazli Esfahani
1999-2
Elements of an Islamic University
Mohammad Hossein Abolbashari
1999-6
hydrodynamic phenomena of collision between a high-speed droplet and a rigid plane using second-orde
Asgar Bradaran Rahimi
1999-12
ANALYTIC SOLUTION FOR HYPERSONIC FLOW PAST ASLENDER ELLIPTIC CONE USING SECOND-ORDER PERTURBATION AP
Asgar Bradaran Rahimi
2000-1
springback of laterally loaded circular plates
Mehran Kadkhodayan
2000-1
Thermal Analysis of Shell-side flow of a shell-and-tufe heat exchanger
Mohammad Moghiman
2000-2
Optimization of hole-making operations: a tabu-search approach
Farhad Kolahan
2000-9
Heat and Mass Transfer in Natural Convection about a Vertical Flat Plate at High Prandtl Numbers
Asgar Bradaran Rahimi
2001-1
TRANSIENT RESPONSE OF FINS WITH VITH VARIABLE CROSS-SECTON USING PERTURBATION TECHNIQUES ALONG WITH
Asgar Bradaran Rahimi
2001-1
hybrid modelling and simulation of the torsional vibration of vehicle driveline systems
Anoshirvan Farshidianfar
2001-1
SIMULATING DROPLET IMPACT ON A SUBSTRATE OF ARBITRARY SHAPE
Mohammad Passandideh-Fard
2001-1
Cooling effectiveness of a water drop impinging on a hot surface
Mohammad Passandideh-Fard
2001-4
Geometric Simulation of Ball-End Milling Operations
Behnam Moetakef Imani
2001-5
On the dependence of spray evaporation and combustion on atomization techniques
Mohammad Moghiman
2001-5
Optimality Conditions for Maximizing the Tip velocity of a Cantilever Beam
Mohammad Hossein Abolbashari
2001-10
experimental and computational studies of soot emission in a gas fuelled swirl stabilized combustor
Mohammad Moghiman
2002-1
using interlacing and irregulur meshes in plate analysis
Mehran Kadkhodayan
2002-1
Dynamics of splat formation in plasma spray coating process
Mohammad Passandideh-Fard
2002-1
A three-dimensional model of droplet impact and solidification
Mohammad Passandideh-Fard
2002-5
Dynamics of soot formation by turbulent combustion and thermal decomposition of natural gas
Mohammad Moghiman
2002-5
Splat Shapes in a Thermal Spray Coating Process: Simulations and Experiments
Mohammad Passandideh-Fard
2002-6
Optimization of the high-frequency torsional vibration of vehicle driveline systems using genetic algorithms
Anoshirvan Farshidianfar,Majid Moavenian
2002-9
driveline shuffle in rear wheel vehicles
Anoshirvan Farshidianfar,Majid Moavenian
2002-10
Measurements and Modeling of Flue Height Influence on Air pollution Emissions and Thermal Efficiency of Natural- Draught Gas Fired Boilers
Mohammad Moghiman
2002-10
heat convection on cylinder at high prandtl numbers
Asgar Bradaran Rahimi
2003-1
heat transfer in an axisymmetric stagnation flow at high reynolds numbers on cylinder using perturba
Asgar Bradaran Rahimi
2003-1
An Investigation of Two-Dimensional, Two – Phase Flow – of Steam in a Cascade of Turbine Blading by
Ali Reza Teymourtash,Mohammad Reza Mahpeykar
2003-3
Prevention of undesirable structural elements in three dimensional topology optimization
Behrooz Hassani
2003-3
Free edge stress analysis of general cross-ply composite laminates under extension and thermal loading
Masoud Tahani
2003-4
Numerical Prediction and Measurement of Carbon Black Through Turbulent Combustion and Decomposition of Natural Gas
Mohammad Moghiman
2003-4
Three-dimensional interlaminar stress analysis at free edges of general cross-ply composite laminates
Masoud Tahani
2003-4
Modeling of the Combustion Oscillations and Soot Formation in Non-premixed Aerovalved Pulse Combustors
Mohammad Moghiman
2003-9
high frequency torsional vibration of vehicular driveline systems in clonk
Anoshirvan Farshidianfar
2003-12
Edge effects of uniformly loaded cross - ply composite laminates
Masoud Tahani
2003-12
Elasto-Plastic Element-Free Galerkin Method
Hamid Ekhteraei Toussi
2004-2
Full Navier-Stokes Computations of Supersonic Flows over a Body at High Angles of Attack and Investigation of Crossflow Separation
Mahmoud Pasandidehfard
2004-2
Influence of Filler Particles on Deformation and Fracture Mechanism of Isotactic Polypropylene
Masoud Tahani
2004-2
Stagnation flow and heat transfer on a moving cylinder with transpiration and high Reynolds numbers
Asgar Bradaran Rahimi
2004-3
Existence of turbulent behavior for non – chaotic two dimensional jets
Javad Abolfazli Esfahani
2004-5
Accurate Determination of Interlaminar Stresses in General Cross-Ply Laminates
Masoud Tahani
2004-6
Studies of nucleating and wet steam flows in two-dimensional cascades
Mohammad Reza Mahpeykar
2004-8
a local stress based approach to fracture following warm pre-stressing
Saeid Hadidi Moud
2004-9
The effects of warm pre-stressing on cleavage fractur, Part I: Evaluation of Experiments
Saeid Hadidi Moud
2004-9
The Effects of Warm Pre-Stressing on Cleavage Fracture, Part 2: Finite element analysis
Saeid Hadidi Moud
2004-9
Comparison of Global and Local Approaches to Predicting Warm Pre-stress effect on Cleavage Fracture toughness of ferritic steels
Saeid Hadidi Moud
2004-10
The Effects of Friction Factor and Inlet Stagnation Conditions on the Self Condensation of Steam in a Supersonic Nozzle
Mohammad Reza Mahpeykar,Ali Reza Teymourtash
2004-10
The Role of Constraint and Warm Pre-stress on Brittle Fracture
Saeid Hadidi Moud
2004-10
Numerical prediction of springback in side-wall curl in U-bending of anisotropic sheet meals
Mehran Kadkhodayan
2005-1
BLSpray: Understanding the effects of black liquor properties and splash-plate nozzle configuration on spray characteristics
Mohammad Passandideh-Fard
2005-1
Three Dimensional transonic Flow Computational over a Projectile and at the Base region
Mahmoud Pasandidehfard
2005-2
Three-Dimensional Stress Analysis of Rotating Composite Beams Due to Material Discontinuities
Masoud Tahani
2005-2
Analysis of Laminar Film Condensation on a Vertical Plate
Javad Abolfazli Esfahani
2005-3
Entropy Generation Analysis of a Flat Plate Boundary Layer with Various Solution Methods
Javad Abolfazli Esfahani
2005-3
Comparison of Analytical, Numerical, and Experimental Methods in Deriving Fracture Toughness Propert
AliReza Setoodeh
2005-3
Interaction of Mechanical Loading with Residual Stresses in Pressure VesselS
Saeid Hadidi Moud
2005-3
A transient two-dimensional model of thermal and oxidative degradation of PMMA
Javad Abolfazli Esfahani,Mohammad Bagher Ayani
2005-4
Transient Laminar Convection Induced by a Line Heat Source A Numerical Study with Primitive Variables
Mohammad Bagher Ayani,Javad Abolfazli Esfahani,Hamid Niazmand
2005-4
Axisymmetric Radial Stagnation-Point Flow of a Viscous Fluid on a Rotating Cylinder with Time-Depend
Asgar Bradaran Rahimi
2005-5
UNSTEADY FREE CONVECTION FROM A SPHERE IN POROUS MEDIUM WITH VARIABLE SURFACE TEMPERATURE
Asgar Bradaran Rahimi
2005-5
Deformation and Stress Analysis of Circumferentially Fiber-Reinforced Composite Disks
Masoud Tahani
2005-6
Slot nozzle design with specified pressure in a given subregion by using embedding method
Javad Abolfazli Esfahani
2005-7
Orr Sommerfeld Solver Using Mapped Finite Difference Scheme for Plane Wake Flow
Mohammad Javad Maghrebi
2005-8
Derivation of incompatible modes in non-conforming finite elements using hierarchical shape functions
Behrooz Hassani
2005-9
N- junction modeling in perforate silencer of internal combustion engines
Seyyed Mohammad Reza Modarres Razavi
2005-10
A New Stochastic Model For Prediction of Fatigue Crack Propagation
Khalil Farhangdoost
2005-10
Exergetic Optimization of Solar Air Heaters and Comparison with Energy Analysis
Hossein Ajam
2005-12
Stress analysis of perforated composite plates
Jalil Rezaee Pazhand
2005-12
An investigation into the influence of deformables dies on springback of circular plates
Mehran Kadkhodayan
2006-1
The effect of radiation on the laminar natural convection induced by a line heat source
Mohammad Bagher Ayani,Javad Abolfazli Esfahani
2006-1
Effect of liquid fuel droplet size on soot emission from turbulent spray flames
Mohammad Moghiman
2006-2
On the Dependence of Soot formation and Combustion on swirling combustion Furnaces: Measurement and Simulation
Mohammad Moghiman
2006-2
Downward flame spread over PMMA sheets in quiescent air: Experimental and theoretical studies
Mohammad Bagher Ayani,Javad Abolfazli Esfahani
2006-2
Numerical Study of Hemodynamic Wall Parameters on Pulsatile Flow through Arterial Stenosis
Seyyed Mohammad Reza Modarres Razavi
2006-2
On various aspects of application of the evolutionary structural optimization method for 2D and 3D continuum structures
Mohammad Hossein Abolbashari
2006-2
Modification of fracture toughness of isotactic polypropylene with a combination of EPR and CaCO3 pa
Masoud Tahani
2006-3
Induction Motor Identification Using Elman Neural Network
Ali Akbar Akbari
2006-4
One-dimensional numerical model for degradation and combustion of polymethyl methacrylate
Javad Abolfazli Esfahani
2006-5
A New Approach for the Analysis of Functionally Graded Beams
Masoud Tahani
2006-6
Nonlinear Analysis of Functionally Graded Beams
Masoud Tahani
2006-6
Numerical Investigation of Slip Effects on the Three-Dimensional Flow Past an Impermiable Rotating Spherical Nano Particle
Hamid Niazmand
2006-6
A study on thermal behavior of HDPE/CaCO3 nanocomposites
Masoud Tahani
2006-7
On Fatigue Crack Propagation of One- Way Rail Road
Khalil Farhangdoost
2006-10
Transient response of finned-tube condenser in household refrigerators
Seyyed Mohammad Reza Modarres Razavi
2006-10
Fatigue Damage Analysis of Drill pipes Using FEM and Cox Regression Model
Khalil Farhangdoost
2006-10
Electro-osmotic flow in reservoir-connected flat microchannels with non-uniform zeta potential
Hamid Niazmand
2006-11
A comparison between Ant colony and Tabu search algorithms for job shop scheduling with sequence-dependent setups
Farhad Kolahan
2006-12
On the Suitability of Soot Formation Models in Turbulent Flames: A Comparison Study
Mohammad Moghiman
2006-12
Outflow Boundary Condition Issues in Direct Numerical Simulation of Three Dimensional Plane Wake Flow
Mohammad Javad Maghrebi
2006-12
Simulation of Sloshing with the Volume of Fluid Method
Mohammad Hassan Djavareshkian
2006-12
Estimation of the power ratio and torque in wind turbine Savonius rotors using artificial neural networks
Ali Kianifar
2007-1
Experimental and numerical studies of carbon black natural gas furnace
Mohammad Moghiman
2007-2
Hall effects on magnetohydrodynamic transient free convection about a semi-infinite vertical flat plate with mass transfer
Asgar Bradaran Rahimi
2007-2
On an optimal shape design problem to control a thermoelastic deformation under a prescribed thermal treatment
Javad Abolfazli Esfahani
2007-2
A multi-objective structural optimization using optimality criteria and cellular automata
Behrooz Hassani
2007-2
An improved design method for estimating the annual auxiliary energy requirement for solar heating building
Ali Kianifar
2007-2
An investigation of soot formation and combustion in turbulent spray flames
Mohammad Moghiman
2007-2
Application of normalized flux in pressure-based algorithm
Mohammad Hassan Djavareshkian
2007-2
Axisymmetric stagnation-point flow and heat transfer obliquely impinging on a rotating circular cylinder.
Asgar Bradaran Rahimi
2007-2
Axisymmetric stagnation-point flow and heat transfer of a viscous fluid on a rotating cylinder with time-dependent angular velocity and uniform transpiration
Asgar Bradaran Rahimi
2007-2
Characterization of Splash-Plate Atomizers using Numerical Simulations
Mohammad Passandideh-Fard
2007-2
Development and Application of Compressible Vorticity Confinement
Mahmoud Pasandidehfard
2007-2
Effect of Air Velocity on Water Evaporation Rate in Indoor Swimming Pools
Mohammad Moghiman
2007-2
Feed rate optimization for 3-axis ball-end milling of sculptured surfaces
Behnam Moetakef Imani
2007-2
Optimization of non-symmetric convective–radiative annular fins by differential quadrature method
AliReza Setoodeh
2007-2
Streaming Electric Potential in Pressure-Driven FlowsThrough Reservoier-Conected Microchannels
Hamid Niazmand
2007-2
The analsis and the feasibility of using the heat pipe cooling in drilling applications
Ali Kianifar
2007-2
THE EFFECT OF SQUARE SPLITTERED AND UNSPLITTERED RODS IN FLAT PLATE HEAT TRANSFER ENHANCEMENT
Mohsen Kahrom
2007-2
On the sensitivity of dimensional stability of high density polyethylene on heating rate
Javad Abolfazli Esfahani
2007-3
Effects of particle size and equivalence ratio on cyclone gasification of wood powder
Mohammad Moghiman
2007-3
Experimental investigation of water EV Aporation in indoor swimmimg pools
Mohammad Moghiman
2007-3
Rolling element bearings multi-fault classification based on the wavelet denoising and support vector machine
Anoshirvan Farshidianfar
2007-3
Simulation of thixoformability of A356 aluminum alloy using finite volume method
Farhad Kolahan
2007-3
Studies on soot formation and combustion in turbulent spray flames: Modeling and experimental measurement
Mohammad Moghiman
2007-3
An Experimental Investigation of Initiation, Propagation and the Fatigue Life of Modified Coach Peel (MCP) Spot Weld Specimens
Mahmoud Shariati
2007-4
An Experimental Investigation of Initiation, Propagation and the Fatigue Life of Modified Coach Peel -MCP- Spot Weld Specimens
Mahmoud Shariati,Mohammad Javad Maghrebi
2007-4
The effects of different neighborhood generation mechanisms on the performance of Tabu Search
Farhad Kolahan
2007-4
Analysis of Laminated Composite Beams Using Layerwise Displacement Theories
Masoud Tahani
2007-5
The effect of surface regression on the downward flame spread over a solid fuel in a quiescent ambient
Mohammad Bagher Ayani,Javad Abolfazli Esfahani
2007-5
Simulated annealing and ant colony optimization for static and dynamic design of helical compression springs
Farhad Kolahan
2007-6
Compact Finite Difference Investigation of Pressure Field Governed by a Three Dimensional Wave Equation
Mohammad Javad Maghrebi,Mahmood Farzaneh-Gord,Mahmoud Shariati
2007-7
A Study of Forced Boundary Layer self similarity by means of DNS
Mohammad Javad Maghrebi
2007-8
Effects of Different Parameters on The Crack Growth of Rotary Disks with Eccentricity Hole Using Emulator and Finite Element Techniques
Mahmoud Shariati,Mohammad Javad Maghrebi
2007-9
Numerical Investigation of a 3-D Flow Past an Impenetrable Rotating Microparticle at Low and Moderate Reynolds Numbers
Hamid Niazmand
2007-9
EFFECT OF CHAR LAYER ON TRANSIENT THERMAL OXIDATIVE DEGRADATION OF POLYETHYLENE
Javad Abolfazli Esfahani
2007-10
Large deformation analysis of moderately thick laminated plates on nonlinear elastic foundations by DQM
AliReza Setoodeh
2007-10
Dynamic response analysis and vibration control of a cantilever beam with a squeeze-mode ER damper
Jalil Rezaee Pazhand
2007-12
A numerical study of flow and heat transfer between two rotating spheres with time-dependent angular velocities
Asgar Bradaran Rahimi
2008-1
A Numerical Study on the Influence of Bauschinger Effect on Springback in Reverse Bending
Mehran Kadkhodayan
2008-1
Application of the homotopy perturbation method to linear and nonlinear 4th-order boundary value problems
Ehsan Roohi
2008-1
Controlling automobile thermal comfort using optimized fuzzy controller
Alireza Akbarzadeh Tootoonchi
2008-1
Frequency Response Calculation of Nonlinear Torsional Vibration in Gear Systems
Anoshirvan Farshidianfar
2008-1
Transient simulations of cavitating flows using a modified volume-of-fluid (VOF) technique
Mohammad Passandideh-Fard,Ehsan Roohi
2008-1
U-Bending Analysis with an Emphasis on Influence of Hardening Models
Mehran Kadkhodayan
2008-1
High-speed contouring enhanced with P-H curves
Behnam Moetakef Imani
2008-2
A hybrid layerwise and differential quadrature method for in-plane free vibration of laminated thick circular arches
AliReza Setoodeh
2008-3
Direct Numerical Simulation of 2--D Incompressible Steady Mixing Layer
Mohammad Javad Maghrebi
2008-4
Calculation of Stress Intensity Factor in Rotary Cracked Disks with Central Hole by Using Emulator Technology
Mahmoud Shariati
2008-4
Shape Optimization of a Nozzle with Specified Flow Field Including Viscosity Effect
Javad Abolfazli Esfahani
2008-4
Structural topology optimization using ant colony methodology
Behrooz Hassani
2008-4
Effect of stacking sequence on the temperature distribution in a composite multy-layered vessel
Mahmoud Shariati
2008-5
Comprehensive Simulation of Surface Texture for End-milling Process
Behnam Moetakef Imani
2008-5
Effect of Fuel Spray Angle on Soot Formation in Turbulent Spray Flames
Mohammad Moghiman
2008-5
Interactive effect of oxygen diffusion and volatiles advection on transient thermal degradation of poly methyl methacrylate
Javad Abolfazli Esfahani
2008-5
similarity solution of unaxisymmetric heat transfer in stagnation-point flow on a cylinder with simultaneous axial and rotational movements
Asgar Bradaran Rahimi
2008-5
Simulated Annealing Application for Structural Optimization
Farhad Kolahan,Mohammad Hossein Abolbashari
2008-5
Conceptual linearization of Euler governing equations to solve high speed compressible flow using a pressure‐based method
Ehsan Roohi
2008-6
On the relation of plastic strain and springback in sheet draw bending
Mehran Kadkhodayan
2008-6
Buckling of Perforated Plates Repaired with Composite Patches
Jalil Rezaee Pazhand
2008-7
Calculation of Stress Intensity Factor by Algebraic Emulator Based on Statistical Resultants of FRANC2D in Rotary Cracked Disks
Mahmoud Shariati
2008-7
Stress Analysis of Composite Plates with Non-circular Cutout
Jalil Rezaee Pazhand
2008-7
Structural Similitude for Buckling of Delaminated Beams
Jalil Rezaee Pazhand
2008-7
A new fictitious time for the dynamic relaxation method
Mehran Kadkhodayan
2008-8
APPLICATION OF UNO SCHEME FOR STEADY AND TRANSIENT COMPRESSIBLE FLOW IN PRESSURE-BASED METHOD
Mohammad Hassan Djavareshkian
2008-8
Flexural Vibration of Timoshenko Beams, Using Distributed Lumped Modeling Technique
Anoshirvan Farshidianfar
2008-8
Impact of Residual Stress and Elastic Follow-Up on Fracture
Saeid Hadidi Moud
2008-8
ER clutches as torque controlling devices for artificial joint
Jalil Rezaee Pazhand
2008-9
On a numerical model for gasification of biomass materials: an alternative method to combustion
Mohammad Passandideh-Fard,Mohammad Moghiman
2008-9
A Numerical Study of Flow and Heat Transfer Between Two Rotating Vertically Eccentric Spheres with Time Dependent Angular Velocities
Asgar Bradaran Rahimi
2008-10
An experimental study on the effects of different opening ranges of waste-gate on the exhaust soot emission of a turbo-charged DI diesel engine
Mohsen Ghazikhani
2008-10
Linear Stability Analysis of Spatially Growing Mixing Layer Flow Using Spectral Method
Mohammad Javad Maghrebi
2008-10
Multidimensional Combustion Simulation and Analytical Solution of Wall Heat Conduction in DI Diesel Engine
Mohammad Hassan Djavareshkian
2008-10
Nanoscale simulations of Bauschinger effects on a nickel nanowire
AliReza Setoodeh
2008-10
Real-time P-H curve CNC interpolators for high speed cornering
Behnam Moetakef Imani
2008-10
Collocation Discrete Least Square (CDLS) Method for Elasticity Problems and Grid Irregularity Effect Assessment
Behrooz Hassani
2008-11
Numerical and experimental investigations on buckling of steel cylindrical shells with elliptical cutout subject to axial compression
Mahmoud Shariati
2008-11
The prediction of cutting force for boring process
Behnam Moetakef Imani
2008-11
A More Comprehensive Modeling of Atomic Force Microscope Cantilever
Anoshirvan Farshidianfar,Masoud Tahani
2008-12
Developing slip-flow and heat transfer in trapezoidal microchannels
Hamid Niazmand
2008-12
Mechanically Induced Trabecular Bone Remodeling Including Cellular Accommodation Effect: a Computer Simulation
Masoud Tahani
2008-12
Nickel nanowires under uniaxial loads: A molecular dynamics simulation study
AliReza Setoodeh
2008-12
Numerical simulation of partial cavitation over axisymmetric bodies: VOF method vs. potential flow theory
Mohammad Passandideh-Fard,Mahmoud Pasandidehfard
2008-12
An ant colony optimization approach to multi-objective optimal design of symmetric hybrid laminates for maximum fundamental frequency and minimum cost
Masoud Tahani
2009-1
Experimental and scale up study of the flame spread over the PMMA sheets
Mojtaba Mamourian,Javad Abolfazli Esfahani,Mohammad Bagher Ayani
2009-1
Finite Element Modeling of Active Vibration Control of IPMC Beams
Jalil Rezaee Pazhand
2009-1
Nonlinear dynamic modeling of surface defects in rolling element bearing system
Anoshirvan Farshidianfar,Hamid Moeenfard
2009-1
On the performance of a cascade of improved turbine nozzle blade in nucleating steam Part1: Surface pressure distribution
Mohammad Reza Mahpeykar
2009-1
Semi-Active Cabin Suspension of Agricultural Vehicles Using ER Mounts
Jalil Rezaee Pazhand
2009-1
Transient Response of Sandwich Beams with Electrorheological Core
Jalil Rezaee Pazhand
2009-1
Effect of Steady State Engine Parameters on Transient Turbocharger Response in Turbocharged Diesel Engines
Mohsen Ghazikhani
2009-2
Effects of rotary inertia and gyroscopic momentum on the flexural vibration of rotating shafts using hybrid modeling
Anoshirvan Farshidianfar
2009-2
Exergetic Optimization of a Solar Photovoltaic Array
Hossein Ajam
2009-2
Free vibration analysis of a nonlinear beam using homotopy and modified lindstedt-poincare methods
Hamid Moeenfard
2009-2
Low velocity impact analysis of laminated composite plates using a 3D elasticity based layerwise FEM
AliReza Setoodeh
2009-2
Modeling and Optimization of Abrasive Waterjet Parameters using Regression Analysis
Farhad Kolahan
2009-2
Tolerance analysis of flexible kinematic mechanism using DLM method
Behnam Moetakef Imani
2009-2
ANTICIPATION OF STABILITY LIMITS FOR TWO DEGREE-OF -FREEDOM INTERRUPTED MILLING
Behnam Moetakef Imani
2009-3
Carbon nanotube-reinforced composites: frequency analysis theories based on the matrix stiffness
Anoshirvan Farshidianfar
2009-3
Collocation Discrete Least Square (CDLS) Method for Elasticity Problems
Behrooz Hassani
2009-3
Shock-capturing method using characteristic-based dissipation filters in pressure-based algorithm
Mohammad Hassan Djavareshkian
2009-3
Some New Analytical Techniques for Duffing Oscillator with Very Strong Nonlinearity
Anoshirvan Farshidianfar
2009-3
Buckling and Post-Buckling of Cracked Plates under Axial Compression Load in Elastic-Plastic Mode
Mahmoud Shariati
2009-4
Exergetic optimization of flat plate solar collectors
Hossein Ajam
2009-4
Frequency response calculation of non-linear torsional vibration in gear systems
Hamid Moeenfard
2009-4
Inverse boundary design of square enclosures with natural convection
Hossein Ajam
2009-4
Nonlinear Bending Analysis of Functionally Graded Plates in Cylindrical Bending under Thermomechanical Loadings Based on a Layerwise Theory
Masoud Tahani
2009-4
Reduction of Thermodynamic Losses in …
Mohammad Reza Mahpeykar
2009-5
Accurate determination of coupling effects on free edge interlaminar stresses in piezoelectric laminated plates
Masoud Tahani
2009-5
Application of the homotopy method for analytical solution of non-Newtonian channel flows
Ehsan Roohi
2009-5
Bending Analysis of Laminated Composite Plates with Arbitrary Boundary Conditions
Masoud Tahani
2009-5
Comfort Improvement in Vehicles Using Electrorheological Dampers and Fuzzy Logic Control
Jalil Rezaee Pazhand
2009-5
Film Condensation on a Flat Plate with Assisted Interfacial Shear Stress
Javad Abolfazli Esfahani
2009-5
Higher-Order Coupled and Uncoupled Analyses of Free Edge Effect of Piezoelectric Laminates under Mechanical Loadings
Masoud Tahani
2009-5
Investigation of Geyser Boiling Phenomenon in a Two-Phase Closed Thermosyphon
Ali Kianifar
2009-5
Investigation of Jet Break-Up Process in Diesel Engine Spray Modelling
Mohammad Hassan Djavareshkian
2009-5
Modeling and simulation of wind turbine Savonius rotors using artificial neural networks for estimation of the power ratio and torque
Ali Kianifar
2009-5
Numerical Modeling of NOx Formation in pulse combustor Using Thermal and Prompt Models
Mohammad Moghiman
2009-5
A Numerical study of flow and heat transfer between two concentric rotating spheres with time-dependent angular velocities
Asgar Bradaran Rahimi
2009-6
Experimental Study of Crack Growth Behavior and Fatigue Life of Spot Weld Tensile Shear Specimens
Mohammad Javad Maghrebi
2009-6
A novel data reduction method for Takagi–Sugeno fuzzy system
Alireza Akbarzadeh Tootoonchi
2009-6
Buckling of composite plates with square/triangular cutouts
Jalil Rezaee Pazhand
2009-6
Modelling and control of a SCARA robot using quantitative feedback theory
Majid Moavenian
2009-6
Numerical evaluation of stress Intensity factors in jointed rock medium by the M-Integral method
Behrooz Hassani
2009-6
Simultaneous job scheduling and tool replacement based on tool reliability by proposed Tabu-SA algorithm
Farhad Kolahan
2009-6
Nonaxisymmetric Three-Dimensional Stagnation-Point Flow and Heat Transfer on a Flat Plate
Asgar Bradaran Rahimi
2009-7
Three-Dimensional Stagnation Flow and Heat Transfer on a Flat Plate with Transpiration
Asgar Bradaran Rahimi
2009-7
Global Equations for Size Dependence for Weibull Parameters in a Ductile-to-Brittle Transition Regime
Saeid Hadidi Moud
2009-7
Stress Analysis for a Coated Fiber Embedded in an Infinite Matrix Subjected to Body Force
Anoshirvan Farshidianfar
2009-7
The effects of rate of expansion and injection of water droplets on the entropy generation of nucleating steam flow in a Laval nozzle
Ali Reza Teymourtash,Javad Abolfazli Esfahani
2009-7
Similarity solution in the study of flow and heat transfer between two rotating spheres with constant angular velocities
Asgar Bradaran Rahimi
2009-8
Analytical solutions for bending analysis of rectangular laminated plates with arbitrary lamination and boundary conditions
Masoud Tahani
2009-8
Effect of Initial Shape Imperfection/Cutout on Buckling of Composite Cylindrical Shells
Jalil Rezaee Pazhand
2009-8
Extending the Navier–Stokes solutions to transition regime in two-dimensional micro- and nanochannel flows using information preservation scheme
Ehsan Roohi
2009-8
Flutter of perforated metallic plates reinforced with segmented piezoelectric patches
Jalil Rezaee Pazhand
2009-8
A novel spherical parallel manipulator: forward position problem singularity analysis and isotropy design
Alireza Akbarzadeh Tootoonchi
2009-9
Comparison of Explicit and Implicit Finite Element Estimation of Springback in Metal Sheets Stamping
Jalil Rezaee Pazhand
2009-9
DQM in-plane free vibration of laminated moderately thick circular deep arches
AliReza Setoodeh
2009-9
DSMC Solution of Subsonic Flow through Micro-Nano Scale Channels
Ehsan Roohi
2009-9
Dynamic simulation of boring process
Behnam Moetakef Imani
2009-9
Entropy generation analysis in error estimation of an approximate solution: A constant surface temperature semi-infinite conductive problem
Javad Abolfazli Esfahani
2009-9
Experimental investigations of Irreversibility effect on Noise level of a dissipative muffler with heat exchanger in a DI Diesel engine
Mohsen Ghazikhani,Ali Kianifar
2009-9
Investigation of Buckling of Steel Cylindrical Shells with Elliptical Cutout Under Bending Moment
Mahmoud Shariati
2009-9
Scaled models for predicting buckling of delaminated orthotropic beam-plates
Jalil Rezaee Pazhand
2009-9
Takagi–Sugeno fuzzy modelling and parallel distributed compensation control of conducting polymer actuators
Majid Moavenian
2009-9
The Lock-in Phenomenon in VIV Using A Modified Wake Oscillator Model for both High and Low Mass-Damping Ratio
Anoshirvan Farshidianfar
2009-9
A Computational Study of Droplet Impingement onto a Thin Liquid Film
Mohammad Passandideh-Fard
2009-10
Isogeometrical solution of Laplace equation
Behrooz Hassani
2009-10
A Novel Diagnostic Tool for Simulation Verification Using Invariant Criteria
Alireza Akbarzadeh Tootoonchi
2009-10
An investigation into the influence of blankholder force on springback in U-bending
Mehran Kadkhodayan
2009-10
Exergy of natural gas flow in Iran’s natural gas fields
Mohammad Javad Maghrebi
2009-10
Free Vibration of Micro-scaled Timoshenko beams
Anoshirvan Farshidianfar
2009-10
MEASUREMENTS AND MODELING OF SOOT AND CO POLLUTANT EMISSIONS IN A LARGE OIL FIRED FURNACE
Mohammad Moghiman
2009-10
An investigation into the different hardening models in reverese forming of thin sheets
Mehran Kadkhodayan
2009-11
Exact solution of conductive heat transfer in cylindrical composite laminate
Mahmoud Shariati
2009-11
Investigation of the Viscous and Thermal Effects on Ductile Fracture in Sheet Metal Blanking Process
Anoshirvan Farshidianfar
2009-11
Investigation of vacancy defects effects on the buckling behavior of SWCNTs via a structural mechanics approach
Mahmoud Shariati
2009-11
Natural Convection over a Non-Isothermal Vertical Flat Plate in Supercritical Fluids
Ali Reza Teymourtash
2009-11
An Experimental Study on the Effect of EGR and Engine Speed on CO and HC Emissions of Dual Fuel HCCI Engine
Mohsen Ghazikhani
2009-12
An Experimental Study on the Effect of Premixed and Equivalence Ratios on CO and HC Emissions of Dual Fuel HCCI Engine
Mohsen Ghazikhani
2009-12
EFFECTS OF HELIX ANGLE VARIATIONS ON STABILITY OF LOW IMMERSION MILLING
Behnam Moetakef Imani
2009-12
Experimental Investigation of the Effect of the Solid Fuel Dimensions on the Downward Flame Spread
Mojtaba Mamourian,Javad Abolfazli Esfahani,Mohammad Bagher Ayani
2009-12
Longitudinal Vibrations Analysis of Vehicular Clutch
Anoshirvan Farshidianfar
2009-12
Molecular Dynamics Simulation of Double-walled Carbon nanotube Vibrations: comparison with continuum elastic therories
Anoshirvan Farshidianfar
2009-12
Numeriical Combustion Modelling of a Gas-Burner
Ali Kianifar
2009-12
An experimental and numerical crashworthiness investigation of crash columns assembled by spot-weld
Mahmoud Shariati
2010-1
Investigation of the effects of Natural Gas Equivalence Ratio and piston Bowl Flow Field on combustion and pollutant Formation of DI Dual Fuel Engine
Mohammad Hassan Djavareshkian
2010-1
An investigation ino the friction aided deep drawing using four and eight tapered segments
Mehran Kadkhodayan
2010-1
Assessment of common turbulence models under conditions of temporal acceleration in a pipe
Mahmoud Pasandidehfard
2010-1
Buckling of steel cylindrical shells with an elliptical cutout
Mahmoud Shariati
2010-1
Effect of Partial Debonding on Response of Perforated Plates Repairedwith Square Composite Patches
Jalil Rezaee Pazhand
2010-1
Evaluation of Turbulence Models in Predicting Turbulence Penetration in Low Reynolds Number Regions
Mohsen Kahrom
2010-1
Experimental investigation of exergy destruction in a 8-kW power plant
Mohsen Ghazikhani
2010-1
Experimental Study on the Injection Pressure on Bsfc and Exhaust Emissions in a TURBOCHARGED DIESEL ENGINE
Mohsen Ghazikhani
2010-1
Flutter of Perforated Metallic Plates Repaired with Cross-Ply Composite Patches
Jalil Rezaee Pazhand
2010-1
Influence of structural defects on the beneficial effect of autofrettage
Saeid Hadidi Moud
2010-1
Inverse dynamics analysis of a general spherical star-triangle parallel manipulator using principle of virtual work
Alireza Akbarzadeh Tootoonchi
2010-1
Loading path optimization of T-shape tube hydroforming process
Mehran Kadkhodayan
2010-1
Neuro–fuzzy modeling tools for estimation of torque in Savonius rotor wind turbine
Ali Kianifar
2010-1
Optimal operation of alloy material in solidification processes with inverse heat transfer
Mohammad Javad Maghrebi
2010-1
Stress concentration in metallic plates with special shaped cutout
Jalil Rezaee Pazhand
2010-1
Structural Similitude for Vibration of Delaminated Composite Beam-Plates
Jalil Rezaee Pazhand
2010-1
The Direct Numerical Simulation of Three-Dimensional Spatially-Developing Free Shear Flow
Mohammad Javad Maghrebi
2010-1
A Comparison of Macroscopic Fracture Surface and Crack Growth Rate of Ti-6Al-4V
Khalil Farhangdoost
2010-2
A New Approach for Predicting andOptimizing Weld Bead Geometry in GMAW
Farhad Kolahan
2010-2
A NEW EFFICIENT APPROACH FOR MODELING AND SIMULATION OF NANO-SWITCHES UNDER THE COMBINED EFFECTS OF INTERMOLECULAR SURFACE FORCES AND ELECTROSTATIC ACTUATION
Hamid Moeenfard
2010-2
A Statistical Approach for Predicting andOptimizing Depth of Cut in AWJ Machiningfor 6063-T6 Al Alloy
Farhad Kolahan
2010-2
Analysis of interlaminar stresses in general cross-ply laminates with distributed piezoelectric actuators
Masoud Tahani
2010-2
Application of Multi Objective Genetic Algorithm to Optimize Heat Transfer Enhancement from a Flat Plate
Mohsen Kahrom
2010-2
Effect of Lubricant on Surface Rolling Contact Fatigue Cracks
Khalil Farhangdoost
2010-2
Global Error Minimization method for solving strongly nonlinear oscillator differential equations
Alireza Akbarzadeh Tootoonchi
2010-2
Heat transfer in open microchannel at constant heat flux
Javad Abolfazli Esfahani
2010-2
Numerical and experimental investigations on the buckling of steel semi- spherical shells under various loadings
Mahmoud Shariati
2010-2
Numerical study of bubble rise and interaction in a viscous liquid
Mohammad Passandideh-Fard
2010-2
The boundary design of a two-dimensional cavity with free convection by the conjugate gradient method
Hossein Ajam
2010-2
A High Order Time Advancement Scheme for Prediction of Solidification Processes
Mohammad Javad Maghrebi
2010-3
Elastic follow-up and relaxation of residual stresses
Saeid Hadidi Moud
2010-3
Exergetic Performance Evaluation of a Solar Photovoltaic (PV) Array
Hossein Ajam
2010-3
Exergy efficiency of a solar photovoltaic array based on exergy destructions
Hossein Ajam
2010-3
Experiments and predictions of the effects of load history on cleavage fracture in steel
Saeid Hadidi Moud
2010-3
Hydrogen and carbon black production from thermal decomposition of sub-quality natural gas
Mohammad Moghiman
2010-3
A modified wake oscillator model for vortex-induced vibration of circular cylinders for a wide range of mass-damping ratio
Anoshirvan Farshidianfar
2010-4
A new criterion for the allocation of residues cost in exergoeconomic analysis of energy systems
Hossein Ajam
2010-4
A Numerical Study on Thermal Dissociation of H2S
Mohammad Moghiman
2010-4
A qualitative comparison of Artificial Neural Networks and Support Vector Machines in ECG arrhythmias classification
Majid Moavenian
2010-4
Crashworthiness Optimization of Foam-filled and Empty Spot-welded Columns
Mahmoud Shariati
2010-4
DNS OF FORCED MIXING LAYER
Mohammad Javad Maghrebi
2010-4
Experimental investigation of the Exhaust Gas Recirculation effects on irreversibility and Brake Specific Fuel Consumption of indirect injection diesel engines
Mohsen Ghazikhani
2010-4
Modeling and optimization of MAG welding for gas pipelines using regression analysis and simulated annealing algorithm
Farhad Kolahan
2010-4
Performance of the Evolutionary Structural Optimization Based Approaches with Different Criteria in the Shape Optimization of Beams
Mohammad Hossein Abolbashari
2010-4
Shear Buckling of Perforated Metallic Plates Reinforced with Square Composite Patches
Jalil Rezaee Pazhand
2010-4
Comments on Detection of multiple cracks using frequency measurements and suggestion for improvement in solution for damage parameters
Anoshirvan Farshidianfar
2010-5
Non-linear effects of suspension 0n hunting and critical velocity of railway wheelset
Mahmoud Shariati
2010-5
A new iterative approach to the optimization of thermal energy systems: Application to the regenerative Brayton cycle
Hossein Ajam
2010-5
A Novel Soft Computing Approach to Component Fault Detection and Isolation of CNC X-Axix Drive System
Majid Moavenian
2010-5
A Numerical and Experimental Study on Buckling of Cylindrical Panels Subjected to Compressive Axial Load
Mahmoud Shariati
2010-5
Flutter of Perforated Metallic Plates Repaired with Angle-ply Composite Patches
Jalil Rezaee Pazhand
2010-5
Free vibration analysis of moderately thick rectangular laminated composite plates with arbitrary boundary conditions
Masoud Tahani
2010-5
Ground adaptive and optimized locomotion of snake robot moving with a novel gait
Alireza Akbarzadeh Tootoonchi
2010-5
Improving Power Plant Efficiency using Water Droplet Injection in Air Condensers
Mohammad Moghiman
2010-5
Optimization of foam filled spot-welded column for the crashworthiness design
Mahmoud Shariati
2010-5
An experimental study on buckling and post-buckling behaviour of cylindrical panels with clamped and simply supported ends
Mahmoud Shariati
2010-6
General analytical solution for elastic radial wave propagation and dynamic analysis of functionally graded thick hollow cylinders subjected to impact loading
Mohammad Hossein Abolbashari
2010-6
A novel approach for forward position analysis of a double-triangle spherical parallel manipulator
Alireza Akbarzadeh Tootoonchi
2010-7
An improved thermal and electrical model for a solar photovoltaic thermal (PV/T) air collector
Hossein Ajam
2010-7
Analytical Approach to Free Vibrations of Cracked Timoshenko Beams Made of Functionally Graded Materials
Masoud Tahani,Hamid Ekhteraei Toussi
2010-7
Carbon Disulfide Production via Hydrogen Sulfide Methane Reformation
Mohammad Moghiman
2010-7
Effect of Sensor Locations on the Solution of Inverse Stefan Problems
Mohammad Javad Maghrebi
2010-7
Pressure-driven electrokinetic slip-flow in planar microchannels
Hamid Niazmand
2010-7
Slip-Flow and Heat Transfer in Isoflux Rectangular Microchannels with Thermal Creep Effects
Hamid Niazmand
2010-7
Stress Analysis of Composite Plates with a Quasi-Square Cutout Subjected to Uniaxial Tension
Jalil Rezaee Pazhand
2010-7
A comparative study of DWT, CWT and DCT transformations in ECG arrhythmias classification
Majid Moavenian
2010-8
Effects of Frequency Variation at Inlet Flow on the Vortex Shedding Frequency Behind a Circular Cylinder
Mahmoud Pasandidehfard
2010-8
A Perturbation Method to analyze the effect of cross section and angle of attack for some conical bodies in Hypersonic flow
Asgar Bradaran Rahimi
2010-8
Displacement time history analysis and radial wave propagation velocity in pressurized multiwall carbon nanotubes
Masoud Tahani,Mohammad Hossein Abolbashari
2010-8
Transient Analysis of Functionally Graded Thick Hollow Circular Cylinders under Mechanical Loadings
Masoud Tahani
2010-8
Transient and Dynamic Stress Analysis of Functionally Graded Thick Hollow Cylinder Subjected to Thermal Shock Loading Using an Analytical Method
Masoud Tahani
2010-8
A Comparison of Smart and Conventional Flaps Close to Ground on Aerodynamic Performance
Mohammad Hassan Djavareshkian,Ali Esmaeili
2010-9
An Analytical Solution for Dynamic Stress Intensity, K<sub>d</sub>, under Impact Loading
Amir Malekzadeh,Saeid Hadidi Moud
2010-9
Bend Sweep Angle and Reynolds Number Effects on Hemodynamics of S-Shaped Arteries
Hamid Niazmand
2010-9
Temperature and Geometry Dependence of Fracture Toughness in "Euro Fracture Dataset"
Saeid Hadidi Moud
2010-9
Experimental study on ultimate strength of CK20 steel cylindrical panels subjected to compressive axial load
Mahmoud Shariati
2010-10
An open source, parallel DSMC code for rarefied gas flows in arbitrary geometries
Ehsan Roohi
2010-10
Control of Interface Acceleration during Solidification Processes Using Inverse Heat Transfer Methods
Mohammad Javad Maghrebi
2010-10
Meshless analysis of cracked functionally graded materials under thermal shock
Mahmoud Shariati,Behrooz Hassani
2010-10
Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading
Mahmoud Shariati
2010-10
Suppression of Condensation Shock in Wet Steam Flow by Injection of Water Droplets in Different Regions of a Laval Nozzle
Mohammad Reza Mahpeykar
2010-10
Vibration and instability of a viscous-fluid-conveying single-walled carbon nanotube embedded in a visco-elastic medium
Anoshirvan Farshidianfar
2010-10
A new approach for optimization of thermal power plant based on the exergoeconomic analysis and structural optimization method: Application to the CGAM problem
Hossein Ajam
2010-11
Effect of Non-uniform Heating on Entropy Generation for Laminar Developing Pipe Flow of a high Prandtl number fluid
Javad Abolfazli Esfahani
2010-11
Effect of time-dependent transpiration on axisymmetric stagnation-point flow and heat transfer of a viscous fluid on a moving circular cylinder
Asgar Bradaran Rahimi
2010-11
Exergetic performance assessment of a solar photovoltaic thermal (PV/T)
Hossein Ajam
2010-11
Optimization of Cyclone Separators Using Genetic Algorithm
Mohammad Moghiman
2010-11
The Influence of Elastic Follow-Up on the Integrity of Structures
Saeid Hadidi Moud
2010-11
Effects of the Exterior Surface Paint Color on Sludge Formation in a Crude Oil StorageTank
Hamid Niazmand
2010-12
Turbulent mixed convection of a nanofluid in a horizontal curved tube using a two-phase approach
Hossein Ajam
2010-12
Exact Solution of Three -Dimensional Unsteady Stagnation Flow on a Heated Plate
Asgar Bradaran Rahimi,Hamid Niazmand
2011-1
A homotopy perturbation analysis of nonlinear free vibration of Timoshenko microbeams
Hamid Moeenfard
2011-1
A new method of fictitious viscous damping determination for the dynamic relaxation method
Mehran Kadkhodayan
2011-1
A Virtual Work Based Algorithm for Solving Direct Dynamics Problem of a 3-RRP Spherical Parallel Manipulator
Alireza Akbarzadeh Tootoonchi
2011-1
Accuracy and stiffness analysis of a 3-RRP spherical parallel manipulator
Alireza Akbarzadeh Tootoonchi
2011-1
Accuracy of scale models for flutter prediction of cross-ply laminated plates
Jalil Rezaee Pazhand
2011-1
Aerodynamics of Smart Flap Under Ground Effect
Mohammad Hassan Djavareshkian,Ali Esmaeili
2011-1
An isogeometrical approach to error estimation and stress recovery
Behrooz Hassani
2011-1
Analytical elastic–plastic study on flange wrinkling in deep drawing process
Mehran Kadkhodayan
2011-1
Axisymmetric yielding of functionally graded spherical vessel under thermo-mechanical loading
Hamid Ekhteraei Toussi
2011-1
Comparison between Fatigue Life of Autofrettage and Nonautofrettage
Khalil Farhangdoost
2011-1
Control parameter estimation in a semi-linear parabolic inverse problem using a high accurate method
Mohammad Javad Maghrebi
2011-1
Effect Of Boundary Conditions On Transient Response Of Sandwich Plates With Electrorheological Fluid Core
Jalil Rezaee Pazhand
2011-1
Elastic-Plastic Flange Wrinkling of Circular Plates in Deep Drawing Process
Mehran Kadkhodayan
2011-1
Estimation of Elastic Follow-Up in Structures
Saeid Hadidi Moud
2011-1
Evaluation of Effective Parameters on EGR/Blowby Distribution
Hamid Niazmand,Seyyed Mohammad Reza Modarres Razavi
2011-1
Experimental and Numerical Investigations on Softening Behavior of POM Under Cyclic Strain-Controlled Loading
Mahmoud Shariati
2011-1
Experimental and numerical studies on buckling and post-buckling behavior of cylindrical panels subjected to compressive axial load
Mahmoud Shariati
2011-1
Experimental Investigation of Natural Gas Fuel Preheating Effects on the Flame Luminosity and NO Emission
Mohammad Moghiman
2011-1
Experimental Investigation of the EGR Temperature Effects on the Destruction of the Fuel’s Availability Due to Combustion Processes in IDI Diesel Engine Cylinder
Mohsen Ghazikhani
2011-1
Implementing an Open-Architecture Controller for a Tension-Compression Fatigue Test Machine
Behnam Moetakef Imani,Amir Ghandehariun
2011-1
Inverse dynamics of a 3-prismatic–revolute–revolute planar parallel manipulator using natural orthogonal complement
Alireza Akbarzadeh Tootoonchi
2011-1
Large deflection analysis of circular and annular FGM plates under thermo-mechanical loadings with temperature-dependent properties
Mehran Kadkhodayan
2011-1
NONLINEAR FREE VIBRATION OF SIMPLY SUPPORTED BEAMS CONSIDERING THE EFFECTS OF SHEAR DEFORMATION AND ROTARY INERTIA, A HOMOTOPY PERTURBATION APPROACH
Hamid Moeenfard
2011-1
Numerical Investigation of Curing Process in Reaction Injection Molding of Rubber for Quality Improvements
Mohammad Moghiman
2011-1
Numerical Study of Circular Hydraulic Jump Using Volume-of-Fluid Method
Mohammad Passandideh-Fard,Ali Reza Teymourtash
2011-1
Optimal synthesis of function generator of four-bar linkages based on distribution of precision points
Mahmoud Shariati
2011-1
Reducing entropy generation by volumetric heat transfer in a supersonic two-phase steam flow in a Laval nozzle
Mohammad Reza Mahpeykar,Ali Reza Teymourtash
2011-1
Similitude requirements and scaling laws for flutter prediction of angle-ply composite plates
Jalil Rezaee Pazhand
2011-1
Simulation of Serrated End Milling Using Solid Modeling Techniques
Behnam Moetakef Imani
2011-1
Structural Similitude between Vibration Response and Flutter Boundary of Cross Ply Composite Plates
Jalil Rezaee Pazhand
2011-1
Study of Supersonic-Subsonic Gas Flows through Micro-Nano Scale Nozzles Using Unstructured DSMC Solver
Ehsan Roohi
2011-1
Three-Dimensional Investigation of Smart Flap Aerodynamics for a WIG Vehicle
Mohammad Hassan Djavareshkian,Ali Esmaeili
2011-1
Two new high-performance cycles for gas turbine with air bottoming
Mohsen Ghazikhani,Mohammad Passandideh-Fard
2011-1
Two-dimensional dynamic analysis of thermal stresses in a finite-length FG thick hollow cylinder subjected to thermal shock loading using an analytical method
Masoud Tahani
2011-1
A new solution approach for simultaneous heat and mass transfer during convective drying of mango
Javad Abolfazli Esfahani
2011-2
An Analytical Approach to Modeling Static Behavior of Torsional Nano-/Micro-actuators under Effect of van der Waals Force
Hamid Moeenfard
2011-2
Frequency analysis for a Timoshenko beam located on an elastic foundation
Hamid Ekhteraei Toussi
2011-2
Frequency analysis of perfect and defective SWCNTs
Mahmoud Shariati
2011-2
Gasification of heavy fuel oils: A thermochemical equilibrium approach
Mohammad Passandideh-Fard,Mohammad Moghiman
2011-2
Nonlinear bending analysis of annular FGM plates using higher-order shear deformation plate theories
Mehran Kadkhodayan
2011-2
Simultaneous Optimization of Machining Parameters and Tool Geometry Specifications in Turning Operation of AISI1045 Steel
Farhad Kolahan
2011-2
Using FEM for Prediction of Thermal Post-Buckling Behavior of Thin Plates During Welding Process
Farhad Kolahan
2011-2
An experimental study on the ratcheting and fatigue behavior of polyacetal under uniaxial cyclic loading
Mahmoud Shariati
2011-3
An Investigation Into the Prediction of Forming Limit Diagrams for Normal Anisotropic Material Based on Bifurcation Analysis
Abdolrahman Jaamialahmadi,Mehran Kadkhodayan
2011-3
Application of time delay resonator to machine tools
Alireza Akbarzadeh Tootoonchi
2011-3
Axisymmetric stagnation flow obliquely impinging on a moving circular cylinder with uniform transpiration
Asgar Bradaran Rahimi
2011-3
Influence of Boundary Conditions and Defects on the Buckling Behavior of SWCNTs via a StructuralMechanics Approach
Mahmoud Shariati
2011-3
Performance improvement of proton exchange membrane fuel cell by using annular shaped geometry
Mohsen Ghazikhani
2011-3
Smart spoiler for race car
Mohammad Hassan Djavareshkian,Ali Esmaeili
2011-3
Soot emission prediction of a waste gated waste-gated turbo- Charged DI diesel engine using artificial neural network
Mohsen Ghazikhani
2011-3
The Investigation of Semi-three-dimensional Heat Transfer Modeling in Micro-Combustors
Javad Abolfazli Esfahani
2011-3
Utilization of thermoelectric cooling in a portable active solar still — An experimental study on winter days
Javad Abolfazli Esfahani
2011-3
Convective Heat Transfer of Nanofluids Flows Through an Isothermally Heated Curved Pipe
Hamid Niazmand
2011-4
Mathematical modeling of convective drying: Lumped temperature and spatially distributed moisture in slab
Javad Abolfazli Esfahani
2011-4
mputation of Stress Intensity Factor in Functionally Graded Plates under Thermal Shock
Mahmoud Shariati,Behrooz Hassani
2011-4
Optimization of Heat Transfer Enhancement of a Flat Plate Based on Pareto Genetic Algorithm
Mohsen Kahrom
2011-4
Solar radiation effects on evaporative losses of floating roof storage tanks
Hamid Niazmand
2011-4
An experimental assessment of the evaporation correlations for natural, forced and combined convection regimes
Mohammad Moghiman
2011-5
Application of Homotopy and Homotopy Perturbation Methods to Differential Equations of Heat Transfer and Shear Deformation of Beams
Ehsan Roohi
2011-5
Double Diffusive Natural Convection Heat Transfer Enhancement in a Square Enclosure Using Nanofluids
Javad Abolfazli Esfahani
2011-5
Exergetic optimization of a solar photovoltaic thermal (PV/T) air collector
Hossein Ajam
2011-5
Finite element modelling and robust control of fast trilayer polypyrrole bending actuators
Majid Moavenian
2011-5
Mathematical modelling and experimental study of a solar distillation system
Ali Kianifar
2011-5
Numerical Analysis and Experimental Study of Buckling Behavior of Steel Cylindrical Panels
Mahmoud Shariati
2011-5
NUMERICAL SIMULATION OF DROPLET IMPACT AND SOLIDIFICATION INCLUDING THERMAL SHRINKAGE IN A THERMAL SPRAY PROCESS
Mohammad Passandideh-Fard
2011-5
Structural similitude for flutter of delaminated composite beam-plates
Jalil Rezaee Pazhand
2011-5
An efficient GDQ model for vibration analysis of a multiwall carbon nanotube on Pasternak foundationwith general boundary conditions
Anoshirvan Farshidianfar
2011-6
Blade curve influences on the performance of Savonius rotors: experimental and numerical
Ali Kianifar
2011-6
Characterization of the static behavior of micromirrors under the effect of capillary force, an analytical approach
Hamid Moeenfard
2011-6
Effect of Friction Models on Snake Robot Performance
Alireza Akbarzadeh Tootoonchi
2011-6
EXPERIMENTAL CONSIDERATION AND CORRELATION OF HEAT TRANSFER OF A TWO-PHASE CLOSED THERMO SYPHON DUE TO THE INCLINATION ANGLE, FILLING RATIO, AND ASPECT RATIO
Ali Kianifar
2011-6
Generating Snake Robot Concertina Locomotion Using a New Dynamic Curve
Alireza Akbarzadeh Tootoonchi
2011-6
Mechanistic modelling for cutting with serrated end mills – a parametric representation approachg
Behnam Moetakef Imani
2011-6
NONLINEAR VIBRATION AND BENDING INSTABILITY OF A SINGLE-WALLED CARBON NANOTUBE USING NONLOCAL ELASTIC BEAM THEORY
Anoshirvan Farshidianfar
2011-6
Numerical Modeling of Non-Charring Material Ablation with Considering Chemical Reaction Effects, Mass Transfer and Surface Heat Transfer
Ali Kianifar
2011-6
Parameter Study in Plastic Injection Molding Process using Statistical Methods and IWO Algorithm
Alireza Akbarzadeh Tootoonchi
2011-6
Performance study of a supersonic inlet in the presence of a heat source
Javad Sepahi-Younsi
2011-6
Quantitative verification of the morphing evolutionary structural optimization method for some benchmark problems using a new performance index
Mohammad Hossein Abolbashari,Anoshirvan Farshidianfar
2011-6
An isogeometrical approach to structural topology optimization by optimality criteria
Behrooz Hassani
2011-7
Effects of dimensional parameters and various boundary conditions on axisymmetric vibrations of multi-walled carbon nanotubes using a continuum model
Masoud Tahani,Mohammad Hossein Abolbashari
2011-7
Effects of Suction and Blowing on Flow and Heat Transfer Between Two Rotating Spheres With Time-Dependent Angular Velocities
Asgar Bradaran Rahimi
2011-7
Modeling of Pull-In Instability of Nano/Micromirrors Under the Combined Effect of Capillary and Casimir Forces
Hamid Moeenfard
2011-7
Vibration analysis of long cylindrical shells using acoustical excitation
Anoshirvan Farshidianfar
2011-7
Application of isogeometric analysis in structural shape optimization
Behrooz Hassani
2011-8
Application of Multi-Objective Optimization for Pollutants Emission Control in an Oil-Fired Furnace
Mohammad Moghiman
2011-8
Estimation of the time- dependent heat flux using the temperature distribution at a point in a two layer system
Asgar Bradaran Rahimi
2011-8
Inverse estimation of boundary conditions on radiant enclosures by temperature measurement on a solid object
Hossein Ajam
2011-8
Multiobjective optimization for force and moment balance of a four-bar linkage using evolutionary algorithms
Abdolrahman Jaamialahmadi
2011-8
Real-time PH-based interpolation algorithm for high speed CNC machining
Behnam Moetakef Imani,Amir Ghandehariun
2011-8
Thermoenvironomic optimization of gas turbine cycles with air preheat
Hossein Ajam
2011-8
A Numerical Solution to Modify the Inverse Heat Conduction Problem with Noisy Data during the Heating a Solid Bar
Javad Abolfazli Esfahani
2011-9
Dynamic buckling of perforated metallic cylindrical panels reinforced with composite patches
Jalil Rezaee Pazhand
2011-9
Effect of defects and loading on prediction of Young’s modulus of SWCNTs
Mahmoud Shariati
2011-9
Evaluating the Effects of Parameters Setting on the Performance of Genetic Algorithm Using Regression Modeling and Statistical Analysis
Farhad Kolahan
2011-9
Hybrid layerwise-differential quadrature transient dynamic analysis of functionally graded axisymmetric cylindrical shells subjected to dynamic pressure
Masoud Tahani
2011-9
Modelling and robust control of a soft robot based on conjugated polymer actuators
Majid Moavenian,Hamid Ekhteraei Toussi
2011-9
Nonlinear free and forced vibration analysis of a single-walled carbon nanotube using shell model
Anoshirvan Farshidianfar
2011-9
Numerical investigation of effective parameters in convective heat transferof nanofluids flowing under a laminar flow regime
Hamid Niazmand
2011-9
Thermal shock analysis and thermo-elastic stress waves in functionally graded thick hollow cylinders using analytical method
Masoud Tahani
2011-9
Analytical dynamic modeling of fast trilayer polypyrrole bending actuators
Majid Moavenian,Masoud Tahani
2011-10
Optimization of cutting conditions in WEDM process using regression modelling and Tabu-search algorithm
Farhad Kolahan
2011-10
Parameter Optimization of a Snake Robot Using Taguchi Method
Alireza Akbarzadeh Tootoonchi
2011-10
Progressive Failure and Energy Absorption of Aluminum Extrusion Damage
Mahmoud Shariati
2011-10
A New simple approach for determination of actuator and sensor location in smart structures subjected to harmonic loads
Jalil Rezaee Pazhand
2011-11
A novel method for direct kinematics solution of fully parallel manipulators using basic regions theory
Alireza Akbarzadeh Tootoonchi
2011-11
MODELING OF BIFURCATION PHENOMENA IN SUDDENLY EXPANDED FLOWS WITH A NEW FINITE VOLUME LATTICE BOLTZMANN METHOD
Mohammad Javad Maghrebi
2011-11
Static behavior of nano/micromirrors under the effect of Casimir force, an analytical approach
Hamid Moeenfard
2011-11
The effect of material properties on the performance of a new geometry PEM fuel cell
Mohsen Ghazikhani
2011-11
Approximate Torsional Analysis of Multi-layered Tubes with Non-circular Cross-Sections
Jalil Rezaee Pazhand
2011-12
Buckling analysis of a cylindrical panel under axial stress using perturbation technique
Mahmoud Shariati
2011-12
Correlation of the performance of a PEM fuel cell at different channel geometries
Mohsen Ghazikhani
2011-12
DSMC simulation of subsonic flow through nanochannels and micro/nano backward-facing steps
Ehsan Roohi
2011-12
Estimation of the time- dependent heat flux using the temperature distribution at a point by conjugate gradian method
Asgar Bradaran Rahimi
2011-12
Modification of SST Turbulence Model on the Basis of Delay Time Concept for Unsteady Flows. Mahtab
Mahmoud Pasandidehfard
2011-12
Necking Prediction in Tube Hydroforming by Stress-Based Forming Limit Diagrams
Abdolrahman Jaamialahmadi,Mehran Kadkhodayan
2011-12
Numerical Study of Heat Flux and Temperature of Spherical Stagnation Point Using Trajector Data and Applying Hot Gas Effectsy
Mahmoud Pasandidehfard
2011-12
A Method for Solving Dynamic Equations of a 3-PRR Parallel Robot
Alireza Akbarzadeh Tootoonchi
2012-1
A New Approach to Kinematics Modelling of Snake-Robot Concertina Locomotion
Alireza Akbarzadeh Tootoonchi
2012-1
A study on dynamic behaviour of functionally graded thick hollow circular cylinders
Masoud Tahani
2012-1
An Investigation on Stiffness Analysis of a 3-PSP Spatial Parallel Mechanism with Flexible Moving Platform Using Invariant Form
Alireza Akbarzadeh Tootoonchi
2012-1
Analytical modeling of static behavior of electrostatically actuated nano/micromirrors considering van der Waals forces
Hamid Moeenfard
2012-1
Buckling analysis of carbon nanotube bundles under axial compressive, bending and torsional loadings via a structural mechanics model
Mahmoud Shariati
2012-1
Design and Modeling of a Snake Robot Based on Worm-Like Locomotion
Alireza Akbarzadeh Tootoonchi
2012-1
Developed Random Tessellation for Modeling of Microstructure
Khalil Farhangdoost
2012-1
Effect of gas diffusion layer and membrane properties in an annular proton exchange membrane fuel cell
Mohsen Ghazikhani
2012-1
Elasto-plastic deformation analysis of rotating disc beyond its limit speed
Hamid Ekhteraei Toussi
2012-1
Experimental and numerical investigation of buckling in rectangular steel plates with groove-shaped cutouts
Mahmoud Shariati
2012-1
Experimental study of a novel portable solar still by utilizing the heatpipe and thermoelectric module
Javad Abolfazli Esfahani
2012-1
Experimental study of SS304L cylindrical shell with/without cutout under cyclic axial loading
Mahmoud Shariati
2012-1
Finite Element Simulation on Failure Assessment of Toughened Epoxy Adhesives
Khalil Farhangdoost
2012-1
Free Vibration of a Carbon Nanotube-Based Mass Sensor
Anoshirvan Farshidianfar
2012-1
Investigation of basic molecular gas structural effects on hydrodynamics and thermal behaviors of rarefied shear driven micro/nano flow using DSMC
Ehsan Roohi,Javad Abolfazli Esfahani
2012-1
Multi Objective Optimization of Turning Process Using Grey Relational Analysis and Simulated Annealing Algorithm
Farhad Kolahan
2012-1
Numerical simulation and experimental comparison of channel geometry on performance of a PEM fuel cell
Mohsen Ghazikhani
2012-1
On a methodology for selecting biomass materials for gasification purposes
Mohammad Passandideh-Fard,Mohammad Moghiman
2012-1
Stability of smart sandwich beams with cross-ply faces and electrorheological core subjected to axial load
Jalil Rezaee Pazhand
2012-1
Static and transient analysis of laminated cylindrical shell panels with various boundary conditions and general lay‐ups
Masoud Tahani
2012-1
The Effects of Parameter Settings on the Performance of Genetic Algorithm through Experimental Design and Statistical Analysis
Farhad Kolahan
2012-1
The influence of impact loading on the fatigue life of EA4T steel
Khalil Farhangdoost,Amir Malekzadeh,Saeid Hadidi Moud
2012-1
three- dimentional investigation of smart flap aerodynamic for a WIG vehicle
Mohammad Hassan Djavareshkian
2012-1
Three-dimensional modeling and development of the new geometry PEM fuel cell
Mohsen Ghazikhani
2012-1
Timestep Selection for Dynamic Relaxation Method
Mehran Kadkhodayan
2012-1
Torsional Buckling Behavior of SWCNTs Using a Molecular Structural Mechanics Approach Considering Vacancy Defects
Mahmoud Shariati
2012-1
A unified formulation for the analysis of temperature field in thick hollow cylinder made of functionally graded materials with various grading patterns
Mohammad Hossein Abolbashari
2012-2
Active vibration isolation of machinery and sensitive equipment using H∞ control criterion and particle swarm optimization method
Anoshirvan Farshidianfar
2012-2
Effects of storage types and conditions on compressed hydrogen fuelling stations performance
Hamid Niazmand
2012-2
Exergy and economic analysis of a pyramid-shaped solar water purification system: Active and passive cases
Ali Kianifar
2012-2
Experimental comparison of the ability of Dalton based and similarity theory correlations to predict water evaporation rate in different convection regimes
Mohammad Moghiman
2012-2
Laminar Film Condensation on a Nanosphere
Javad Abolfazli Esfahani
2012-2
Mixed convection in cylindrical annulus with rotating outer cylinder and constant magnetic field with effect in radial direction
Asgar Bradaran Rahimi
2012-2
Nonlinear flow-induced vibration of a SWCNT with a geometrical imperfection
Anoshirvan Farshidianfar
2012-2
Nonlinear vibration and rippling instability for embedded carbon nanotubes
Anoshirvan Farshidianfar
2012-2
Numerical modeling of charring material ablation with considering chemical reaction, mass transfer and surface heat transfer effects
Asgar Bradaran Rahimi
2012-2
The modeling and process analysis of resistance spot welding on galvanized steel sheets used in car body manufacturing
Farhad Kolahan
2012-2
Unconfined laminar nanofluid flow and heat transfer around a square cylinder
Hamid Niazmand
2012-2
Analytical Solution for Thermoelastic Waves Propagation Analysis in Thick Hollow Cylinder Based on Green-Naghdi Model of Coupled Thermoelasticity
Mohammad Hossein Abolbashari
2012-3
Application of Single Objective Genetic Algorithm to Optimize Heat Transfer Enhancement from a Flat Plate
Mohsen Kahrom
2012-3
Application of Taguchi Optimization Method in Active Vibration Control of a Smart Beam
Alireza Akbarzadeh Tootoonchi
2012-3
Application of Wavelet Thresholding Filter to Improve Multi-Step Ahead Prediction Model For Hydraulic System
Alireza Akbarzadeh Tootoonchi,Behnam Moetakef Imani
2012-3
Entropy Generation Analysis for Microscale Forced Convection in Thermal Entrance Region
Hamid Niazmand
2012-3
Exergoeconomic Analysis of a Steam Power Plant in Iran
Hossein Ajam
2012-3
Experimental characterization and Correlation of a triangular channel geometry PEM fuel cell at different operating conditions
Mohsen Ghazikhani
2012-3
Experimental Study of Natural Gas Temperature Effects on the Flame Luminosity and No Emission
Mohammad Moghiman
2012-3
Forced Convection Heat Transfer of Nanofluids in a Porous Channel
Mohammad Javad Maghrebi
2012-3
Modeling free surface flows in presence of an arbitrary moving object
Mohammad Passandideh-Fard
2012-3
Multi-objective Approach in Exergoeconomic and Environmental Optimization of the Gas Turbine Cycle
Hossein Ajam
2012-3
Online Trajectory Generation of a 2 Link Robot in Presence of Obstacle
Alireza Akbarzadeh Tootoonchi
2012-3
Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings using Bee Colony Optimization Technique
Anoshirvan Farshidianfar
2012-3
An investigation of the optimal load paths for the hydroforming of T-shaped tubes
Mehran Kadkhodayan
2012-4
An investigation on the seismic performance of reinforced concrete panel structures
Behrooz Hassani
2012-4
Analytical modeling of bending effect on the torsional response of electrostatically actuated micromirrors
Hamid Moeenfard
2012-4
Analytical solution for bending of moderately thick radially functionally graded sector plates with general boundary conditions using multi-term extended Kantorovich method
Masoud Tahani
2012-4
Application of smart flap for race car wings
Mohammad Hassan Djavareshkian,Ali Esmaeili
2012-4
Buckling Load Analysis of Oblique Loaded Stainless Steel 316ti Cylindrical Shells with Elliptical Cutout
Mahmoud Shariati
2012-4
Experimental and thermodynamic investigation of a triangular channel geometry PEM fuel cell at different operating conditions
Mohsen Ghazikhani
2012-4
Fault Detection and Isolation of Vehicle Driveline System
Majid Moavenian
2012-4
Improved dynamic simulation of end-milling process using time series analysis
Behnam Moetakef Imani
2012-4
Interlaminar stresses in thick rectangular laminated plates with arbitrary laminations and boundary conditions under transverse loads
Masoud Tahani
2012-4
Investigation on Buckling Behavior of Tubular Shells with Circular Cutout, Subjected to Combined Loading
Mahmoud Shariati
2012-4
Ultimate Strength Analysis of Combined Loaded Stainless Steel Circular Tubes with Hole
Mahmoud Shariati
2012-4
An investigation on stiffness of a 3-PSP spatial parallel mechanism with 1 flexible moving platform using invariant form
Alireza Akbarzadeh Tootoonchi
2012-5
Effects of nanoparticle volume fraction in hydrodynamic and thermal characteristics of forced plane jet
Mohammad Javad Maghrebi
2012-5
Numerical simulation of heat and mass transfer in adsorbent beds with annular fins
Hamid Niazmand
2012-5
Optimized Tuned Liquid Column Dampers for Earthquake Oscillations of High-rise Structures Including Soil Effects
Anoshirvan Farshidianfar
2012-5
Recommendations on performance of parallel DSMC algorithm in solving subsonic nanoflows
Ehsan Roohi
2012-5
The influence of vertical deflection of the supports in modeling squeeze film damping in torsional micromirrors
Hamid Moeenfard
2012-5
Thermal and second-law analysis of a micro- or nanocavity using direct-simulation Monte Carlo
Ehsan Roohi,Hamid Niazmand
2012-5
Transient response of laminated plates with arbitrary laminations and boundary conditions under general dynamic loadings
Masoud Tahani
2012-5
A bio-inspired approach for online trajectory generation of industrial robots
Alireza Akbarzadeh Tootoonchi
2012-6
An efficient method to solve the strongly coupled nonlinear differential equations of impact dampers
Aref Afsharfard,Anoshirvan Farshidianfar
2012-6
Development of a new creep testing equipment to obtain long-term deformation parameters of salt
Mahmoud Shariati
2012-6
Double-diffusive natural convection in a rectangular cavity with partially thermally active side walls
Asgar Bradaran Rahimi
2012-6
Effects of gas properties and geometrical parameters on performance of a vortex tube
Ali Reza Teymourtash
2012-6
Exact Solution of Unsteady Conductive Heat Transfer in Cylindrical Composite Laminates
Mahmoud Shariati
2012-6
INFLUENCE OF VAN DER WAALS FORCE ON STATIC BEHAVIOR OF NANO/MICROMIRRORS UNDER CAPILLARY FORCE
Hamid Moeenfard
2012-6
Investigation of Two-Dimensional Unsteady Stagnation-Point Flow and Heat Transfer Impinging on an Accelerated Flat Plate
Asgar Bradaran Rahimi
2012-6
Mathematical simulation of convective drying: Spatially distributed temperature and moisture in carrot slab
Javad Abolfazli Esfahani
2012-6
MODELING OF EXTRUSION PROCESS AND APPLICATION OF TAGUCHI METHOD AND ANOVA ANALYSIS FOR OPTIMIZATION THE PARAMETERS
Khalil Farhangdoost
2012-6
Simulation of Gas Pipeline Leakage Using Modified Characteristics Method
Asgar Bradaran Rahimi
2012-6
A coupled two degree of freedom pull-in model for micromirrors under capillary force
Hamid Moeenfard
2012-7
A glance on the effects of temperature on axisymmetric dynamic behavior of multiwall carbon nanotubes
Masoud Tahani,Mohammad Hossein Abolbashari
2012-7
A New Generalized Controller for Engine in Idle Speed Condition
Majid Moavenian
2012-7
An efficient continuum model for CNTs-based bio-sensors
Anoshirvan Farshidianfar
2012-7
Comparison of Lift and Drag Forces for Some Conical Bodies in Supersonic Flow Using Perturbation Techniques
Asgar Bradaran Rahimi
2012-7
Entropy generation of forced convection film condensation on a horizontal elliptical tube
Javad Abolfazli Esfahani
2012-7
Lattice Boltzmann Finite Volume Formulation with Improved Stability
Mohammad Javad Maghrebi
2012-7
LB simulation of heat transfer in flow past a square unit of four isothermal cylinders
Javad Abolfazli Esfahani
2012-7
New automated learning CPG for rhythmic patterns
Alireza Akbarzadeh Tootoonchi,Ali Akbar Akbari
2012-7
Numerical Modeling of the Freezing of a Porous Humid Food inside a Cavity due to Natural Convection
Hamid Niazmand
2012-7
Simplified Approach for Torsional Analysis of Non-Homogenous Tubes with Non- Circular Cross-Sections
Jalil Rezaee Pazhand
2012-7
Simulation of Semi-Molten Particle Impacts Including Heat Transfer and Phase Change
Mohammad Passandideh-Fard
2012-7
Study on the Variation Effects of Diverging Angleon Characteristics of Flow in Converging and Diverging Ducts by Numerical Method
Mohammad Moghiman
2012-7
Transient dynamic and free vibration analysis of functionally graded truncated conical shells with non-uniform thickness subjected to mechanical shock loading
Masoud Tahani
2012-7
An analytical solution for thermal shock analysis of multiwall carbon nanotubes
Masoud Tahani,Mohammad Hossein Abolbashari
2012-8
An energy based analysis of broaching operation: Cutting forces and resultant surface integrity
Behnam Moetakef Imani
2012-8
Buckling and Post Buckling Investigation of Thin Walled Shells Contain Elliptical and Circular Cutout, Subjected to Oblique Loading
Mahmoud Shariati
2012-8
Buckling of Cracked Laminated Composite Cylindrical Shells Subjected to Combined Loading
Mahmoud Shariati
2012-8
Non‐linear analysis of moderately thick laminated plates and shell panels under thermo‐mechanical loadings
Masoud Tahani
2012-8
Periodic solution for nonlinear vibration of a fluid-conveying carbon nanotube, based on the nonlocal continuum theory by energy balance method
Anoshirvan Farshidianfar
2012-8
Stagnation-Point Flow and Heat Transfer of a Viscous, Compressible Fluid on a Cylinder
Asgar Bradaran Rahimi
2012-8
A Modified Storen-Rice Bifurcation Analysis of Sheet Metal Forming Limit Diagrams
Abdolrahman Jaamialahmadi,Mehran Kadkhodayan
2012-9
A new iterative wall heat flux specifying technique in DSMC for heating/cooling simulations of MEMS/NEMS
Ehsan Roohi
2012-9
Experimental and numerical investigations on the ratcheting characteristics of cylindrical shell under cyclic axial loading
Mahmoud Shariati
2012-9
Free Vibration Analysis of Circular Cylindrical Shells: Comparison of Different Shell Theories
Anoshirvan Farshidianfar
2012-9
Investigating Vibratory Behavior of Nonlinear Single Unit Impact Dampers Using Perturbation Method and Genetic Algorithm
Aref Afsharfard
2012-9
Nurbs-Based Profile Reconstruction using Constrained Fitting Techniques
Behnam Moetakef Imani
2012-9
On a Numerical Model for Free Surface Flows of a Conductive Liquid Under an Electrostatic Field
Mohammad Passandideh-Fard
2012-9
Particle Tracking BasedMethod for Evaluation of Cylinder-to- CylinderDistribution of EGR/Blowby
Hamid Niazmand,Seyyed Mohammad Reza Modarres Razavi
2012-9
Slip flow over micron-sized spherical particles at intermediate Reynolds numbers
Hamid Niazmand
2012-9
A Linear Approach to the Control of Vortex Induced Vibrations of Circular Cylinders with a 2-D Van der Pol Model for Structural Oscillator
Anoshirvan Farshidianfar
2012-10
A novel approach for determining thermal properties of single-walled carbon nanotubes
Hamid Niazmand
2012-10
A novel scheme for nonlinear displacement-dependent dampers
Anoshirvan Farshidianfar
2012-10
EFFECTS OF THERMAL CREEP ON COOLING OF MICROFLOWS IN SHORT MICROCHANNELS WITH CONSTANT WALL TEMPERATURE
Hamid Niazmand
2012-10
Elasto-Plastic Axisymmetric Thermal Stress Analysis of Functionally Graded Cylindrical vessels
Hamid Ekhteraei Toussi
2012-10
Estimation of the strenght of the time-dependent heat source using temperature distribution at a point in a three layer system
Asgar Bradaran Rahimi
2012-10
Experimental Investigation of the Effect of Argon Dilution on NOx Emission in Propane-Air Non-Premixed Flame
Hamid Niazmand
2012-10
Finite element modeling of mandrel speed in cold expansion process
Khalil Farhangdoost
2012-10
Investigating Nonlinear Vibration of a Fully Clamped Nanobeam in Presence of the van der Waals Attraction
Masoud Tahani
2012-10
Numerical and Experimental Investigation of Loading Band on Buckling of Perforated Rectangular Steel Plates
Mahmoud Shariati
2012-10
Numerical Study Of Mixed Convection In An Annulus Between Concentric Rotating Cylinders With Time-Dependent Angular Velocity
Asgar Bradaran Rahimi
2012-10
Optimization of Shrinkage in Plastic Injection Molding Process Using Statistical Methods and SA Algorithm
Alireza Akbarzadeh Tootoonchi
2012-10
Similarity Solution for Unsteady Free Convection From a Vertical Plate at Constant Temperature to Power Law Fluids
Javad Abolfazli Esfahani
2012-10
A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences
Mehran Kadkhodayan
2012-11
A New Method for Precision of a Serpentine Snake-Like Robot
Alireza Akbarzadeh Tootoonchi
2012-11
Bending buckling behavior of perfect and defective single-walled carbon nanotubes via a structural mechanics model
Mahmoud Shariati
2012-11
GMGA VSMGA and PSO Methods for Functional Constrained
Majid Moavenian
2012-11
Investigation of a new flux scheme for the numerical simulation of the supersonic intake flow
Javad Sepahi-Younsi
2012-11
Investigation of Sour Natural Gas Decomposition in a Nozzle-type Solar Reactor for Hydrogen Production
Mohammad Moghiman
2012-11
Vibration of wavy single-walled carbon nanotubes based on nonlocal Euler Bernoulli and Timoshenko
Anoshirvan Farshidianfar
2012-11
Analytical Approximations to Nonlinear Vibration of a Clamped Nanobeam in Presence of the Casimir Force
Masoud Tahani
2012-12
Bed geometrical specifications effects on the performance of silica/water adsorption chillers
Hamid Niazmand
2012-12
Design of nonlinear impact dampers based on acoustic and damping behavior
Aref Afsharfard,Anoshirvan Farshidianfar
2012-12
Estimation of convective heat transfer coefficient in a single-slope solar still: a numerical study
Javad Abolfazli Esfahani
2012-12
Mechanical Unfolding of Titin I27 Domain: Nanoscale Simulation of Mechanical Properties Based on Virial Theorem via Steered Molecular Dynamics Technique
Mohammad Hossein Abolbashari
2012-12
Mixed Convective Slip Flows in a Vertical parallel-plate Plate Microchannel With Symmetric and Asymmetric Wall Heat Fluxes
Hamid Niazmand
2012-12
On the natural convective heat transfer from a cold horizontal cylinder over an adiabatic surface
Mohammad Javad Maghrebi
2012-12
Optimizing the shape of rotor blades for maximum power extraction in marine current turbines
Javad Abolfazli Esfahani
2012-12
The Normalized Analysis of Surface Heterogeneous Reaction of Propane/Air Mixture into Micro-Channel
Javad Abolfazli Esfahani
2012-12
Using Gray Relational Analysis and Taguchi Technique in Solving Multi-objective Problems for Turning Operation of Austenitic Stainless Steel
Farhad Kolahan
2012-12
A novel approach to evaluate the temperature during drying of food products with negligible external resistance to mass transfer
Javad Abolfazli Esfahani
2013-1
A Parallel DSMC Investigation of Monatomic/Diatomic Gas Flow in Micro/Nano Cavity
Ehsan Roohi,Hamid Niazmand
2013-1
A review of the applications of nanofluids in solar energy
Ali Kianifar
2013-1
An Optimization of Wind Turbine Airfoil Possessing Good Stall Characteristics by Genetic Algorithm Utilizing CFD and Neural Network
Mohammad Hassan Djavareshkian
2013-1
Annalytical Modeling of the Effect of Electrostatic Actuation and Casimir Force on the Pull-in Instability and Static Behavior of Torsional Nano/Micro Actuators
Hamid Moeenfard
2013-1
Applying a hybrid DSMC/Navier–Stokes frame to explore the effect of splitter catalyst plates in micro/nanopropulsion systems
Ehsan Roohi
2013-1
Dynamic stability of smart sandwich beams with electro-rheological core resting on elastic foundation
Jalil Rezaee Pazhand
2013-1
Effects of plate finned heat exchanger parameters on the adsorption chiller performance
Hamid Niazmand
2013-1
Interlaminar stresses in general thick rectangular laminated plates under in-plane loads
Masoud Tahani
2013-1
Large deflection thermoelastic analysis of functionally graded stiffened annular sector plates
Mehran Kadkhodayan
2013-1
Modeling of fluid flow and heat transfer in laser welding with a moving heat source
Hossein Ajam
2013-1
Modeling squeezed film air damping in torsional micromirrors using extended Kantorovich method
Hamid Moeenfard,Anoshirvan Farshidianfar
2013-1
Numerical investigation of viscoelastic shedding flow behind a circular cylinder
Mohammad Javad Maghrebi
2013-1
Optimization of flapping-wing micro aircrafts based on the kinematic parameters using genetic algorithm method
Javad Abolfazli Esfahani
2013-1
Optimization of Heat Transfer Enhancement of a Domestic Gas Burner Based on Pareto Genetic Algorithm: Experimental and Numerical Approach
Mohsen Kahrom
2013-1
Position and stiffness analysis of a new asymmetric 2PRR–PPR parallel CNC machine
Alireza Akbarzadeh Tootoonchi
2013-1
Productivity estimation of a single-slope solar still: Theoretical and numerical analysis
Javad Abolfazli Esfahani
2013-1
The Optimum Design of a Cavitator for High-Speed Axisymmetric Bodies in Partially Cavitating Flows
Mohammad Passandideh-Fard,Mahmoud Pasandidehfard
2013-1
Transonic Flow Simulation Around the Pitching Airfoil with Accurate Pressure-Based Algorithm
Mohammad Hassan Djavareshkian
2013-1
Axisymmetric stagnation-point flow and heat transfer of a viscous fluid on a moving plate with time-dependent axial velocity and uniform transpiration
Asgar Bradaran Rahimi
2013-2
Axisymmetric stagnation-point flow and heat transfer of a viscous, compressible fluid on a cylinder with constant heat flux
Asgar Bradaran Rahimi,Ali Kianifar
2013-2
Effect of stiffeners on crashworthiness of square aluminium columns considering damage evolution
Mahmoud Shariati
2013-2
Fully nonlinear viscous wave generation in numerical wave tanks
Mohammad Passandideh-Fard,Mohammad Moghiman
2013-2
How does clamping pressure influence actuation performance of soft ionic polymer–metal composites
Alireza Akbarzadeh Tootoonchi,Alireza Akbarzadeh Tootoonchi,Jalil Rezaee Pazhand,Jalil Rezaee Pazhand
2013-2
Influence of nanoparticles on reducing and enhancing evaporation mass transfer and its efficiency
Mohammad Moghiman
2013-2
Modified higher-order wake oscillator model for vortex-induced vibration of circular cylinders
Anoshirvan Farshidianfar
2013-2
Natural convection on a vertical plate with variable heat flux in supercritical fluids
Ali Reza Teymourtash
2013-2
Neuro-Fuzzy Based Approach for Estimation of Hydrofoil Performance
Mohammad Hassan Djavareshkian,Ali Esmaeili
2013-2
A new practical-analytical method to determine residual stress around cold worked holes on Measured Residual Strains
Khalil Farhangdoost
2013-3
Aeroelastic stability of smart sandwich plates with electrorheological fluid core and orthotropic faces
Jalil Rezaee Pazhand
2013-3
Analytical solution of piezolaminated rectangular plates with arbitrary clamped/simply-supported boundary conditions under thermo-electro-mechanical loadings
Masoud Tahani
2013-3
Axial Crush of Metallic and Hybrid Energy Absorbing Thin-walled Tubes with Polygonal Cross-sections: Numerical Analysis
Seyed Abdolmajid Yousefsani,Jalil Rezaee Pazhand
2013-3
Coupled thermoelasticity of a functionally graded cracked layer under thermomechanical shocks
Mahmoud Shariati
2013-3
Experimental investigations on the softening and ratcheting behaviors of steel cylindrical shell under cyclic axial loading
Mahmoud Shariati
2013-3
Investigation of damage detection in blade root joints of a 100 kW wind turbine using frequency tracking
Ali Akbar Akbari
2013-3
Numerical simulation and parametric study of a supersonic intake
Javad Sepahi-Younsi
2013-3
Numerical study of developed laminar mixed convection of Al2O3/water nanofluid in an annulus
Mohammad Javad Maghrebi
2013-3
Optimization of load paths in X- and Y-shaped hydroforming
Mehran Kadkhodayan
2013-3
Second Law Analysis of Micro/Nano-Couette FlowUsingDirect Simulation Monte Carlo Method
Javad Abolfazli Esfahani,Ehsan Roohi
2013-3
A coupled bending-torsion model for electrostatically actuated torsional nano/micro-actuators with considering influence of van der Waals force
Hamid Moeenfard
2013-4
A numerical study on shear layer behaviour in flow over a square unit of four cylinders at Reynolds number of 200 using the LB method
Javad Abolfazli Esfahani
2013-4
Applicability of small-scale models in prediction flutter pressure of delaminated composite beam-plates
Jalil Rezaee Pazhand
2013-4
Bending Analysis of Piezolaminated Rectangular Plates under Electromechanical Loadings Using Multi-Term Extended Kantorovich Method
Masoud Tahani
2013-4
Development of a new spinning gait for a planar snake robot using central pattern generators
Alireza Akbarzadeh Tootoonchi
2013-4
Dynamic modeling and robust control of an L-shaped microrobot based on fast trilayer polypyrrole-bending actuators
Majid Moavenian
2013-4
Dynamics analysis of a 3-RRP spherical parallel manipulator using the natural orthogonal complement
Alireza Akbarzadeh Tootoonchi
2013-4
Effect of Important Thermophysical Properties on Condensation Shock in a Steam Flow
Mohammad Reza Mahpeykar
2013-4
Elastoplastic buckling analysis of plates involving free edges by deformation theory of plasticity
Mehran Kadkhodayan
2013-4
Evaluation of simultaneous effects of inlet stagnation pressure and heat transfer on condensing water-vapor flow in a supersonic Laval nozzle
Mohammad Reza Mahpeykar,Ali Reza Teymourtash
2013-4
Isogeometric topology optimization of structures by using MMA
Behrooz Hassani
2013-4
Response of multiwall carbon nanotubes to impact loading
Masoud Tahani,Mohammad Hossein Abolbashari
2013-4
Robust Design of a Bimetallic Micro Thermal Sensor Using Taguchi Method
Alireza Akbarzadeh Tootoonchi,Behnam Moetakef Imani
2013-4
Simultaneous shape and topology optimization of shell structures
Behrooz Hassani
2013-4
The effect of alcoholic fuel additives on exergy parameters and emissions in a two stroke gasoline engine
Mohsen Ghazikhani
2013-4
Theoretical investigation of effects of local cooling of a nozzle divergent section for controlling condensation shock in a supersonic two-phase flow of steam
Mohammad Reza Mahpeykar,Ali Reza Teymourtash
2013-4
Accurate determination of stress distributions in adhesively bonded homogeneous and heterogeneous double-lap joints
Seyed Abdolmajid Yousefsani,Masoud Tahani
2013-5
Analytical dynamic modeling of a cantilever IPMC actuator based on a distributed electrical circuit
Jalil Rezaee Pazhand,Alireza Akbarzadeh Tootoonchi
2013-5
Estimation of the time- dependent heat flux using the temperature distribution at a point
Asgar Bradaran Rahimi
2013-5
MIXED CONVECTIVE RAREFIED FLOWS WITH SYMMETRIC AND ASYMMETRIC HEATED WALLS
Hamid Niazmand
2013-5
Three-dimensional transient analysis of functionally graded cylindrical shells subjected to asymmetric dynamic pressure
Masoud Tahani
2013-5
A General Solution For Implicit Time Stepping Scheme in Rate-Dependant Plasticity
Mehran Kadkhodayan
2013-6
Analytical solution for bending problem of moderately thick composite annular sector plates with general boundary conditions and loadings using multi-term extended Kantorovich method
Masoud Tahani
2013-6
Analytical solutions for adhesively bonded composite single-lap joints under mechanical loadings using full layerwise theory
Seyed Abdolmajid Yousefsani,Masoud Tahani
2013-6
Application of Single Unit Impact Dampers to Reduce Undesired Vibration of the 3R Robot Arms
Aref Afsharfard
2013-6
Effect of Corner Bluntness on Energy Absorbing Capability of Non-circular Metallic Tubes Subjected to Axial Impact
Jalil Rezaee Pazhand,Seyed Abdolmajid Yousefsani
2013-6
Effect of speed and load on exergy recovery in a water-cooled two stroke gasoline-ethanol engine for the bsfc reduction purposes
Mohsen Ghazikhani
2013-6
Entropy Generation DUE to Conjugate Convection in an Enclosure Using The Lattice Boltzmann Method
Javad Abolfazli Esfahani
2013-6
Implementation of the extended finite element method for coupled dynamic thermoelastic fracture of a functionally graded cracked layer
Mahmoud Shariati
2013-6
Numerical simulation of cavitation around a two-dimensional hydrofoil using VOF method and LES turbulence model
Ehsan Roohi,Mahmoud Pasandidehfard
2013-6
Optimization of PM scheduling for multi-component systems - A simulated annealing approach
Farhad Kolahan
2013-6
Pulling of double-stranded DNA by atomic force microscopy: a simulation in atomistic details
Masoud Tahani
2013-6
Reliability‐based Design for Damping Behavior of Inner Mass Single‐unit Impact Dampers
Aref Afsharfard,Farhad Kolahan
2013-6
Simulation of Pitching and Heaving Airfoil with Oscillation of Flow Boundary Condition
Mohammad Hassan Djavareshkian
2013-6
A review of entropy generation in nanofluid flow
Ali Kianifar
2013-7
Alternative Equations to Compute the Network and the Thermal Efficiency of the Irreversible Diesel Cycle Using Genetic Algorithm
Javad Abolfazli Esfahani
2013-7
Analysis of two-dimensional functionally graded rotating thick disks with variable thickness
Behrooz Hassani
2013-7
Bending analysis of laminated sector plates with polar and rectilinear orthotropy
Masoud Tahani
2013-7
Direct simulation Monte Carlo investigation of mixed supersonic–subsonic flow through micro-/nano-scale channels
Ehsan Roohi
2013-7
Effects of altitude on the soot emission and fuel consumption of a light-duty diesel engine
Mohsen Ghazikhani
2013-7
Evaluation of Eddy Viscosity Models in Predicting Free- Stream Turbulence Penetration
Mohsen Kahrom
2013-7
Free vibration analysis of nonlinear resilient impact dampers
Aref Afsharfard,Anoshirvan Farshidianfar
2013-7
Mixed Convection Between Two Vertically Eccentric Rotating Spheres with Time-Dependent Angular Velocities
Asgar Bradaran Rahimi
2013-7
Modeling of shape memory alloy springs using a recurrent neural network
Iman Kardan
2013-7
Optimization of TMD parameters for Earthquake Vibrations of Tall Buildings Including Soil Structure Interaction
Anoshirvan Farshidianfar
2013-7
Plastic limit speed of FGM disc due to the variation of temperature and material composition
Hamid Ekhteraei Toussi
2013-7
Solidification of Two-Dimensional Viscous, Incompressible Stagnation Flow
Asgar Bradaran Rahimi
2013-7
A Study on Systematic Procedure for Choosing the Best Powertrain Configuration in Hybrid Sedan Cars
Masoud Tahani
2013-8
Accuracy analysis of predicted velocity profiles of laminar duct flow with entropy generation method
Javad Abolfazli Esfahani
2013-8
An efficient concept for non-dimensionalizing the Duffing equations based on the parameterized perturbation method
Aref Afsharfard,Anoshirvan Farshidianfar
2013-8
Ant colony optimization of tuned mass dampers for earthquake oscillations of high-rise structures including soil–structure interaction
Anoshirvan Farshidianfar
2013-8
Detailed investigation of hydrodynamics and thermal behavior of nano/micro shear driven flow using DSMC
Ehsan Roohi,Javad Abolfazli Esfahani
2013-8
DSMC Simulation of Low Knudsen Micro/Nano Flows using Small Number of Particles per Cells
Ehsan Roohi,Hamid Niazmand
2013-8
Effect of caudal on hydrodynamic performance of flapping foil in fish-like swimming
Javad Abolfazli Esfahani
2013-8
ENTRANCE EFFECTS OF THERMAL CREEP ON FLUID HEATING IN RECTANGULAR MICROCHANNELS
Hamid Niazmand
2013-8
Experimental study of argon dilution effects on NO x emission in a non-premixed flame in comparison with nitrogen
Hamid Niazmand
2013-8
Hydrodynamic behaviour of micro/nanoscale Poiseuille flow under thermal creep condition
Ehsan Roohi
2013-8
Position, Jacobian and workspace analysis of a 3-PSP spatial parallel manipulator
Alireza Akbarzadeh Tootoonchi
2013-8
PREDICTING CONTINUUM BREAKDOWN OF RAREFIED MICRO/NANO FLOWS USING ENTROPY AND ENTROPY GENERATION ANALYSIS
Hamid Niazmand,Ehsan Roohi
2013-8
Effects of particle diameter on performance improvement of adsorption systems
Hamid Niazmand
2013-9
Enhancement of staability by adaptive fuzzy and active geometry suspention system
Ali Akbar Akbari
2013-9
Exact analysis of resonance frequency and mode shapes of isotropic and laminated composite cylindrical shells; Part II: Parametric studies
Anoshirvan Farshidianfar
2013-9
Investigation of electrokinetic mixing in 3D non-homogenous microchannels
Hamid Niazmand
2013-9
New Approach to High-Fidelity Aerodynamic Design Optimization of a Wind Turbine Blade
Mohammad Hassan Djavareshkian
2013-9
Non-linear analysis of fiber-reinforced open conical shell panels considering variation of thickness and fiber orientation under thermo-mechanical loadings
Masoud Tahani
2013-9
Optimization of moving wing in Ground effect using Response Surface Method
Mohammad Hassan Djavareshkian
2013-9
Stick-slip conditions in the general motion of a planar rigid body
Iman Kardan
2013-9
Study on buckling of steel cylindrical shells with an elliptical cutout under combined loading
Mahmoud Shariati
2013-9
A closed-form semi analytical elastic-plastic solution for predictiong the onset of flange wrinkling in deep-drawing of a two-layered circular plate
Mehran Kadkhodayan
2013-10
Double Cracks Identification in Functionally Graded Beams Using Artificial Neural Network
Mohammad Hossein Abolbashari
2013-10
Free-edge stress analysis of general rectangular composite laminates under bending, torsion and thermal loads
Masoud Tahani
2013-10
Investigation of water balance in water recovery of closed steam injection gas turbine cycles
Mohsen Ghazikhani
2013-10
Numerical Study of Three-Dimensional Mixed Convection in an Eccentric Annulus
Asgar Bradaran Rahimi
2013-10
On the microscopic parameters at a moving contact line during wetting process
Mohammad Passandideh-Fard
2013-10
Optimization of Moving Wingin Ground Effect using Response Surface Method
Ali Esmaeili,Mohammad Hassan Djavareshkian
2013-10
Prefoldin 1: A New Bio-Nanorobots Component
Majid Moavenian
2013-10
Thermo-elastic optimization of material distribution of functionally graded structures by an isogeometrical approach
Behrooz Hassani
2013-10
Three-Dimensional Stagnation Flow and Heat Transfer of a Viscous, Comprresible Fluid on a Flat Plate
Asgar Bradaran Rahimi
2013-10
A hybrid DSMC/Navier–Stokes frame to solve mixed rarefied/nonrarefied hypersonic flows over micro-obstacles/nano-obstacles
Ehsan Roohi
2013-11
An improved isogeometrical analysis approach to functionally graded plane elasticity problems
Behrooz Hassani
2013-11
Design of a robust quantitative feedback theory position controller for an ionic polymer metal composite actuator using an analytical dynamic model
Alireza Akbarzadeh Tootoonchi,Jalil Rezaee Pazhand
2013-11
Numerical Simulation of Smart Hydrofoil in Marine System
Mohammad Hassan Djavareshkian,Ali Esmaeili
2013-11
Solutions to the problem of thermomechanical yielding in functionally graded material cylindrical vessels
Hamid Ekhteraei Toussi
2013-11
ABC optimization of TMD parameters for tall buildings with soil structure interaction
Anoshirvan Farshidianfar
2013-12
An experimental investigation on the effects of surface gravity waves on the water evaporation rate in different air flow regimes
Mohammad Moghiman
2013-12
Buckling behavior of perfect and defective DWCNTs under axial, bending and torsional loadings via a structural mechanics approach
Mahmoud Shariati
2013-12
Comparative investigations in the effect of angle of attack profile on hydrodynamic performance of bio-inspired foil, (corrected)
Javad Abolfazli Esfahani
2013-12
Comparison of Theoretical Prediction and Experimental Values of Nanofluids Thermal Conductivity filled by TiO2, SiO2, and Al2O3
Javad Abolfazli Esfahani
2013-12
Dispersion of ZnO Nanoparticles in a Mixture of Ethylene Glycol–Water, Exploration of Temperature-Dependent Density, and Sensitivity Analysis
Ali Kianifar
2013-12
Effects of diverging angle and fuel molecular weight on NOx emissions in converging and diverging ducts
Mohammad Moghiman
2013-12
Exact analysis of resonance frequency and mode shapes of isotropic and laminated composite cylindrical shells; Part I: analytical studies
Anoshirvan Farshidianfar
2013-12
Exergy recovery from the exhaust cooling in a DI diesel engine for BSFC reduction purposes
Mohsen Ghazikhani
2013-12
Experimental investigation of performance improving and emissions reducing in a two stroke SI engine by using ethanol additives
Mohsen Ghazikhani
2013-12
Experimental Study of Flow Developing in Adverse Pressure Gradient Condition of Open Circuit Suction-Type Wind Tunnel by Particle Image Velocimetry
Javad Abolfazli Esfahani
2013-12
Lattice Boltzmann simulation of viscous-fluid flow and conjugate heat transfer in a rectangular cavity with a heated moving wall
Javad Abolfazli Esfahani
2013-12
Numerical and Experimental Study on Ratcheting Behavior of Steel Cylindrical Shells with-without Cutout Under Cyclic Combined and Axial Loading
Mahmoud Shariati
2013-12
Optimum design of dynamic vibration absorbers for a beam, based on H ∞ and H2 Optimization
Anoshirvan Farshidianfar
2013-12
Protection of Bend from Erosion Caused by Gas- Particle Flows in Town Border Station
Javad Abolfazli Esfahani
2013-12
Experimental Investigation of the Vortex Generator Effects on a Gas Liquid Finned Tube Heat Exchanger Using Irrevesibility Analysis
Mohsen Ghazikhani
2014-1
A reliability-based approach to optimize preventive maintenance scheduling for coherent systems
Farhad Kolahan
2014-1
Alternative curved-boundary treatment for the lattice Boltzmann method and its application in simulation of flow and potential fields
Hamid Niazmand
2014-1
An analytical investigation on thermomechanical stress analysis of adhesively bonded joints undergoing heat conduction
Seyed Abdolmajid Yousefsani,Masoud Tahani
2014-1
An interval-valued fuzzy controller for complex dynamical systems with application to a 3-PSP parallel robot
Alireza Akbarzadeh Tootoonchi
2014-1
An investigation into the static response of fiber-reinforced open conical shell panels considering various types of orthotropy
Masoud Tahani
2014-1
An Investigation into the Thermoelastic Analysis of Circular and Annular Functionally Graded Material Plates
Mehran Kadkhodayan
2014-1
Axisymmetric Elastoplasticity of a Temperature-Sensitive Functionally Graded Cylindrical Vessel
Hamid Ekhteraei Toussi
2014-1
Broiler Diets Formulated Based on Digestible Amino Acid Values as Determined by in vivo and Prediction Methods
Farhad Kolahan
2014-1
Comparison of Performance Base and Optimized Blades of Horizontal Axis Wind Turbine
Mohammad Hassan Djavareshkian
2014-1
Effects of Particle Migration on Nanofluid Forced Convection Heat Transfer in a Local Thermal Non-Equilibrium Porous Channel
Mohammad Javad Maghrebi
2014-1
Elastic/plastic Buckling Analysis of Skew Thin Plates based on Incremental and Deformation Theories of Plasticity by using Generalized Differential Quadrature Method
Mehran Kadkhodayan
2014-1
Evaluate and control the weld quality, using acoustic data and artifical neural network modeling
Farhad Kolahan
2014-1
Experimental investigation of exhausttemperature and delivery ratioeffect on emissions and performance of a gasoline–ethanol two-strokeengine
Mohsen Ghazikhani
2014-1
Heuristic optimization of submerged hydrofoil using ANFIS–PSO
Mohammad Hassan Djavareshkian,Ali Esmaeili
2014-1
Influence of Gradient Magnetic Field on Quenching and Elongating Diffusion Flame
Mohammad Moghiman
2014-1
Investigation of convective heat transfer through constant wall heat flux micro/nano channels using DSMC
Ehsan Roohi
2014-1
Mass flow rate prediction of pressure–temperature-driven gas flows through micro/nanoscale channels
Ehsan Roohi
2014-1
Non-linear bending analysis of shear deformable functionally graded rotating disk
Mehran Kadkhodayan
2014-1
Numerical Investigation of Hydro-Magnetic Flow of Air in a Lid Driven Cavity for an Optimum Magnetic Situation
Mohammad Hassan Djavareshkian
2014-1
Numerical simulation of a submerged cylindrical wave energy converter
Mohammad Passandideh-Fard,Mohammad Moghiman
2014-1
Numerical Simulation of Electroosmotic Flow in Flat Microchannels with Lattice Boltzmann Method
Hamid Niazmand
2014-1
Online bio-inspired trajectory generation of seven-link biped robot based on T–S fuzzy system
Alireza Akbarzadeh Tootoonchi,Ali Akbar Akbari
2014-1
QRS complex detection based on simple robust 2-D pictorial-geometrical feature
Majid Moavenian
2014-1
Quadrotor Full dynamic Modeling, Nonlinear Simulation and Control of Attitudes
Ali Akbar Akbari
2014-1
Three-dimensional static analysis of thick functionally graded plates using graded finite element method
Mehran Kadkhodayan
2014-1
Two relaxation time lattice Boltzmann model for rarefied gas flows
Javad Abolfazli Esfahani
2014-1
Two-dimensional analytical model of flame characteristic in catalytic micro-combustors for a hydrogeneair mixture
Javad Abolfazli Esfahani
2014-1
A hybrid NN-FE approach to adjust blank holder gap over punch stroke in deep drawing process
Mehran Kadkhodayan
2014-2
A thorough study on thermal mass flux of rarefied flow through micro/nanochannels
Ehsan Roohi
2014-2
Analysis of Nitric Oxide Formation for Turbulent Swirling Flames in Liquid-Fueled Furnaces
Mohammad Moghiman
2014-2
Analytical two-dimensional analysis of the transport phenomena occurring during convective drying: Apple slices
Javad Abolfazli Esfahani
2014-2
Elastic/plastic buckling of isotropic thin plates subjected to uniform and linearly varying in-plane loading using incremental and deformation theories
Mehran Kadkhodayan
2014-2
Investigation of Unsteady Parameters Effects on Aerodynamic Coefficients of Pitching Airfoil Using Coarse Grid CFD
Mahmoud Pasandidehfard
2014-2
Modeling and analysis of magnetorheological inner mass single unit impact dampers
Aref Afsharfard,Anoshirvan Farshidianfar
2014-2
Modeling Geometric Non-linearities in The Free Vibration of a Planar Beam Flexure with a Tip Mass
Hamid Moeenfard
2014-2
Molecular dynamics study of DNA oligomers under angled pulling
Masoud Tahani
2014-2
Numerical Investigation of Effect of Nano-Aluminum Addition on NOx and CO Pollutants Emission in Liquid Fuels Combustion
Mohammad Moghiman
2014-2
Optimal Homotopy Asymptotic Method to MHD Flow of a Viscoelastic Fluid Aver a Stretching Sheet
Ali Reza Teymourtash
2014-2
Propose a Correlation to Approximate Nanofluids‟ Enthalpy of Vaporization - A Numerical Study
Mohammad Moghiman
2014-2
Residual strains around cold worked holes from statistical view
Khalil Farhangdoost
2014-2
A Study on Combination of von Mises and Tresca Yield Loci in Non-associated Viscoplasticity
Mehran Kadkhodayan
2014-3
A taguchi approach for optimization of process parameters in waterjet cleaning process
Farhad Kolahan
2014-3
An Investigation into the Deep Drawing of Fiber-metal Laminates based on Glass Fiber Reinforced Polypropylene
Mehran Kadkhodayan
2014-3
Analytical Solutions of Stress Field in Adhesively Bonded Composite Single-lap Joints under Mechanical Loadings
Masoud Tahani,Seyed Abdolmajid Yousefsani
2014-3
Effect of a new wet soot absorber on soot removal of a diesel engine
Mohsen Ghazikhani
2014-3
Effect of aluminum nanoparticles on combustion characteristics and pollutants emission of liquid fuels – A numerical study
Mohammad Moghiman
2014-3
Experimental investigation of the effects of silica/water nanofluid on PV/T (photovoltaic thermal units)
Mohammad Passandideh-Fard
2014-3
Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies
Mahmood Farzaneh-Gord
2014-3
Global bifurcation and chaos analysis in nonlinear vibration of spur gear systems
Anoshirvan Farshidianfar
2014-3
Instability of cracked CFRP composite cylindrical shells under combined loading
Mahmoud Shariati
2014-3
Kerosene wick lamp flame deformation in gradient magnetic fields
Mohammad Moghiman
2014-3
Modeling and Optimization of Surface Roughness of AISI2312 Hot Worked Steel in EDM based on Mathematical Modeling and Genetic Algorithm
Farhad Kolahan
2014-3
Nonlinear Variation Analysis of Compliant Sheet Metal Assemblies Including Effect of Surface Continuity in Components
Behnam Moetakef Imani
2014-3
Study of Physical Aspects of Rarefied Gas Flow Through Micro/Nano Scale Channels Using DSMC
Ehsan Roohi
2014-3
Torsion of tubes with quasi-polygonal holes using complex variable method
Jalil Rezaee Pazhand
2014-3
An alternative reduced order model for electrically actuatedmicro-beams under mechanical shock
Masoud Tahani
2014-4
Bifurcation and Chaos Prediction in Nonlinear Gear Systems
Anoshirvan Farshidianfar
2014-4
Buckling Analysis of Steel Semi-Spherical Shells with Square Cutout Under Axial Compression
Mahmoud Shariati
2014-4
Effect of Knitted Loop Length on the Fluctuation Amplitude of Yarn Fed into a Circular Weft-Knitting Machine using a New Opto-Electro Device
Majid Moavenian
2014-4
Effects of High-Order Slip/Jump, Thermal Creep, and Variable Thermophysical Properties on Natural Convection in Microchannels With Constant Wall Heat Fluxes
Hamid Niazmand
2014-4
Exergetic performance of a cylindrical methane-air microcombustor under various inlet conditions
Javad Abolfazli Esfahani
2014-4
Integration of artificial neural network and simulated annealing algorithm to optimize deep drawing process
Farhad Kolahan
2014-4
Introducing a Novel Active Multi-Chamber Engine Mount with Self-Cooling Capability with an Estimation of Vibrational Parameters
Masoud Tahani
2014-4
Large Eddy Simulation of Shock Train in a Convergent- Divergent Nozzle
Ehsan Roohi
2014-4
Lattice-Boltzmann simulation of forced convection over an electronic board with multiple obstacles
Javad Abolfazli Esfahani
2014-4
Modeling the rate of heat loss from the stack of a natural gas pressure reducing station heater
Ali Kianifar
2014-4
Plastic Deformation Influence on Material Properties of Autofrettaged Tubes Used in Diesel Engines Injection System
Khalil Farhangdoost
2014-4
The Effect of Heat and Mass Transfer Coefficients on the Vacuum Drying of Porous Body, A Numerical Study
Mohammad Bagher Ayani
2014-4
Unsteady Two-Dimensional Stagnation-Point Flow and Heat Transfer of a Viscous, Compressible Fluid on an Accelerated Flat Plate
Asgar Bradaran Rahimi
2014-4
An application of principal component analysis method in wood defects identification
Majid Moavenian
2014-5
Application of single unit impact dampers to harvest energy and suppress vibrations
Aref Afsharfard,Anoshirvan Farshidianfar
2014-5
Developing A Surface Roughness Model for End-Milling of Micro-Channel
Behnam Moetakef Imani
2014-5
Dynamic Pull-In Investigation of a Clamped-Clamped Nanoelectromechanical Beam under Ramp-Input Voltage and the Casimir Force
Masoud Tahani
2014-5
Experimental study of SS316L cantilevered cylindrical shells under cyclic bending load
Mahmoud Shariati
2014-5
Free vibration characteristics of functionally graded structures by an isogeometrical analysis approach
Mohammad Hossein Abolbashari,Behrooz Hassani
2014-5
Investigation of Nonlinear Bending Analysis of Moderately Thick Functionally Graded Material Sector Plates Subjected to Thermomechanical Loads by the GDQ Method
Mehran Kadkhodayan
2014-5
More efficiency in fuel consumption using gearbox optimization based on Taguchi method
Ali Akbar Akbari,Alireza Akbarzadeh Tootoonchi
2014-5
Simultaneous isogeometrical shape and material design of functionally graded structures for optimal eigenfrequencies
Behrooz Hassani
2014-5
The Investigation of Modelling Material Behavior in Autofrettaged Tubes Made from Aluminium Alloys
Khalil Farhangdoost
2014-5
Three-dimensional transient analysis of functionally graded truncated conical shells with variable thickness subjected to an asymmetric dynamic pressure
Masoud Tahani
2014-5
Diabetic Control Using Genetic Fuzzy-PI Controller
Ali Akbar Akbari
2014-6
Finite element buckling analysis of multi-layered graphene sheets on elastic substrate based on nonlocal elasticity theory
Behrooz Hassani
2014-6
Free Vibration Analysis of Rods using Adomian Decomposition Method
Mohammad Hossein Abolbashari
2014-6
Numerical and parametric study of a centrifugal pump
Javad Abolfazli Esfahani
2014-6
Synthesis of robust PID controller for controlling a single input single output system using quantitative feedback theory technique
Majid Moavenian
2014-6
Thermal rarefied gas flow investigations through micro/nano backward-facing step: Comparison of DSMC and CFD subject to hybrid slip and jump boundary conditions
Ehsan Roohi
2014-6
A multi-crack effects analysis and crack identification in functionally graded beams using particle swarm optimization algorithm and artificial neural network
Mohammad Hossein Abolbashari
2014-7
Analysis of one dimensional inviscid and two dimensional viscous flows using Entropy Preserving method
Mahmoud Pasandidehfard
2014-7
Application of the Amplitude-Frequency Formulation to a Nonlinear Vibration System Typified by a Mass Attached to a Stretched Wire
Anoshirvan Farshidianfar
2014-7
Entropy analysis for an unsteady MHD flow past a stretching permeable surface in nano-fluid
Mohammad Hossein Abolbashari
2014-7
Extension of a second order velocity slip/temperature jump boundary condition to simulate high speed micro/nanoflows
Ehsan Roohi
2014-7
Finding the buckling load of non-uniform columns using the iteration perturbation method
Aref Afsharfard,Anoshirvan Farshidianfar
2014-7
NUMERICAL ANALYSIS OF A NANOFLUID FORCED CONVECTION IN A POROUS CHANNEL: A NEW HEAT FLUX MODEL IN LTNE CONDITION
Mohammad Javad Maghrebi
2014-7
Vibration suppression of composite plates using smart electrorheological dampers
Jalil Rezaee Pazhand
2014-7
Energy-Based Prediction of Low-Cycle Fatigue Life of CK45 Steel and SS316 Stainless Steel
Mahmoud Shariati
2014-8
Entropy generation during Al2O3/water nanofluid flow in a solar collector: Effects of tube roughness, nanoparticle size, and different thermophysical models
Ali Kianifar
2014-8
Exergy analysis of gas turbine with air bottoming cycle
Mohsen Ghazikhani
2014-8
Mode Count and Modal Density of Isotropic Circular Cylindrical Shells Using a Modified Wavenumber Space Integration Method
Anoshirvan Farshidianfar
2014-8
Numerical Investigation of the Flameless Oxidation of Natural Gas in the IFRF Furnace Using Large Eddy Simulation
Javad Abolfazli Esfahani
2014-8
Numerical Study Of Mixed Convection In The Annulus Between Eccentric Rotating Cylinders
Asgar Bradaran Rahimi,Ali Kianifar
2014-8
Prediction of Above-elbow Motions in Amputees, based on Electromyographic (EMG) Signals, Using Nonlinear Autoregressive Exogenous (NARX) Model
Ali Akbar Akbari
2014-8
Regression modeling of welded joint quality in gas metal arc welding process using acoustic and electrical signals
Farhad Kolahan
2014-8
Similarity Solutions Of Axisymmetric Stagnation-Point Flow And Heat Transfer Of A Viscous, (Compressible) Boussinesq-Related Density Fluid On An Accelerated Flat Plate
Asgar Bradaran Rahimi
2014-8
Similarity Solutions of Axisymmetric Stagnation-Point Flow and Heat Transfer of a Viscous, Boussinesq-Related Density Fluid On a Moving Flat Plate
Asgar Bradaran Rahimi
2014-8
A numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load
Mahmoud Shariati
2014-9
Fluid-structure interaction in abdominal aortic aneurysms: Structural and geometrical considerations
Hamid Niazmand
2014-9
Heat transfer and fluid characteristics of rarefied flow in thermal cavities
Ehsan Roohi,Javad Abolfazli Esfahani
2014-9
Implementing the New First and Second Differentiation of a General Yield Surface in Explicit and Implicit Rate- Independent Plasticity
Mehran Kadkhodayan
2014-9
Investigation of aerodynamic characteristics of rarefied flow around NACA 0012 airfoil using DSMC and NS solvers
Ehsan Roohi,Mohsen Kahrom
2014-9
Performance analysis of a minichannel-based solar collector using different nanofluids
Ali Kianifar
2014-9
Wall heat transfer effects on the hydro/thermal behaviour of Poiseuille flow in micro/nanochannels
Ehsan Roohi
2014-9
Accurate Dynamic Modeling of Helical Ionic Polymer-Metal Composite Actuator Based on Intrinsic Equations
Jalil Rezaee Pazhand,Alireza Akbarzadeh Tootoonchi
2014-10
An Investigation the Effects of Geometric Tolerances on the Natural Frequencies of Rotating Shafts
Abdolrahman Jaamialahmadi
2014-10
Analytic Investigation of the Effects of Condensation Shock on Turbulent Boundary Layer Parameters of Nucleating Flow in a Supersonic Convergent-Divergent Nozzle
Mohammad Reza Mahpeykar,Ali Reza Teymourtash
2014-10
Analytical investigation of simultaneous effects of friction and heating to a supersonic nucleating Laval nozzle
Mohammad Reza Mahpeykar,Ali Reza Teymourtash
2014-10
ANALYTICAL MODELING OF SQUEEZE FILM DAMPING IN DUAL AXIS TORSION MICROACTUATORS
Hamid Moeenfard
2014-10
Artificial neural network method for solving the Navier–Stokes equations
Hamid Niazmand
2014-10
Costs Due to Entropy Generation in a Vertical Annulus Using Nanofluids and Different Thermophysical Models
Ali Kianifar
2014-10
DSMC simulation of micro/nano flows using SBT–TAS technique
Ehsan Roohi,Hamid Niazmand
2014-10
Identification and control of chaos in nonlinear gear dynamic systems using Melnikov analysis
Anoshirvan Farshidianfar
2014-10
Large deflection analysis of moderately thick radially functionally graded annular sector plates fully and partially rested on two-parameter elastic foundation by GDQ method
Mehran Kadkhodayan
2014-10
Numerical and Experimental Study of a Ventilated Supercavitating Vehicle
Mahmoud Pasandidehfard,Mohammad Passandideh-Fard
2014-10
Simultaneous estimation of controllable parameters in a living tissue during thermal therapy
Mohammad Bagher Ayani
2014-10
The analytical modeling of propane-oxygen mixture at catalytic micro-channel
Javad Abolfazli Esfahani
2014-10
Topography and Surface Roughness of Floor in Groove Micro Milling
Behnam Moetakef Imani
2014-10
Accurate electrostatic and van der Waals pull-in prediction for fully clamped nano/micro-beams using linear universal graphs of pull-in instability
Masoud Tahani
2014-11
An improved sensitivity-free probability analysis in variation assessment of sheet metal assemblies
Behnam Moetakef Imani
2014-11
Analytical solution for dynamic behavior of multiwall carbon nanotubes subjected to mechanical shock loading
Masoud Tahani,Mohammad Hossein Abolbashari
2014-11
EXPERIMENTAL AND NUMERICAL INVESTIGATION INTO ENHANCING RADIATION CHARACTERISTICS OF NATURAL-GAS FLAME BY INJECTION OF MICRO KEROSENE DROPLETS
Mohammad Moghiman
2014-11
Experimental study on the effects of flame regime on the exergy destruction in premixed low swirl combustion
Mohsen Ghazikhani,Seyyed Mohammad Reza Modarres Razavi
2014-11
First and second laws analysis of a minichannel-based solar collector using boehmite alumina nanofluids: Effects of nanoparticle shape and tube materials
Ali Kianifar
2014-11
Modeling of gas release following pipeline rupture: Proposing nondimensional correlation
Javad Abolfazli Esfahani
2014-11
New models for heat flux splitting at the boundary of a porous medium: three energy equations for nanofluid flow under local thermal nonequilibrium conditions
Mohammad Javad Maghrebi
2014-11
Numerical and Experimental Analysis of the Fluid-Structure Interaction in Presence of a Hyperelastic Body
Mohammad Passandideh-Fard
2014-11
Numerical Investigation of Replaced equations for Irreversible Otto Cycle Using Pareto-Based Multi-Objective Genetic Algorithm
Javad Abolfazli Esfahani
2014-11
CFD Simulation of Particles Effects on Characteristics of Detonation
Mohammad Hassan Djavareshkian
2014-12
Effect of blade type on a 3D FC centrifugal fan
Hossein Ajam
2014-12
Free vibration of high-speed rotating Timoshenko shaft with various boundary conditions: effect of centrifugally induced axial force
Anoshirvan Farshidianfar
2014-12
Modeling and Optimization of Process Parameters Using Neural Networks and Simulated Algorithm for Electrical Discharge Machining of AISI2312 Hot Worked Steel
Farhad Kolahan
2014-12
Numerical Study of Entropy Generation in the Flameless Oxidation Using Large Eddy Simulation Model and OpenFOAM Software
Javad Abolfazli Esfahani
2014-12
Shock-induced molar concentration wave propagation and coupled non-Fick diffusion-elasticity analysis using an analytical method
Mohammad Hossein Abolbashari
2014-12
Special criterion for crack path prediction at microstructure scale based on dominate slip system and grain boundary
Khalil Farhangdoost
2014-12
Three dimensional investigation of the shock train structure in a convergent–divergent nozzle
Ehsan Roohi
2014-12
Transonic Flow Simulation Around the plunging Airfoil with Oscillation of Flow Boundary Condition
Mohammad Hassan Djavareshkian
2014-12
Analytical modeling of entropy generation for Casson nano-fluid flow induced by a stretching surface
Mohammad Hossein Abolbashari
2015-1
Deep-drawing of thermoplastic metal-composite structures: Experimental investigations, statistical analyses and finite element modeling
Mehran Kadkhodayan
2015-1
Effect of pulverized anthracite coal particles injection on thermal and radiative characteristics of natural gas flame: An experimental study
Mohammad Moghiman
2015-1
Entropy generation analysis of squeeze film air damping in torsional micromirrors
Javad Abolfazli Esfahani,Hamid Moeenfard
2015-1
Experimental investigation of residual stress around cold-worked holes and its effect on fatigue life
Khalil Farhangdoost
2015-1
Experimental investigation of stationary and rotational structures in non - circular hydraulic jumps
Ali Reza Teymourtash
2015-1
Full dynamics and control of a quadrotor using quantitative feedback theory
Majid Moavenian
2015-1
Improved general solution for the dynamic modeling of Gough–Stewart platform based on principle of virtual work
Alireza Akbarzadeh Tootoonchi
2015-1
Investigation of handmade ferrofluids' motion in a ventilated cavity using computational fluid dynamics
Mohammad Hassan Djavareshkian
2015-1
Investigation of sustainability in machining processes: exergy analysis of turning operations
Amir Ghandehariun
2015-1
Mechanical properties and energy absorption capability of thin-walled square columns of silica/epoxy nanocomposite
Mahmoud Shariati
2015-1
Numerical Investigation of the Unstart Suppression in a Supersonic Air Intake
Javad Sepahi-Younsi
2015-1
Numerical Investigation on Optimizing Fatigue Life in a Lap Joint Structure
Khalil Farhangdoost
2015-1
Numerical simulation of a flat electroosmotic driven flow in the presence of a charged mid-plate
Hamid Niazmand
2015-1
Numerical study of liquid flow and heat transfer in rectangular microchannel with longitudinal vortex generators
Ehsan Roohi
2015-1
Optimization of EDM Process Parameters Using Statistical Analysis and Simulated Annealing Algorithm
Farhad Kolahan
2015-1
Size-dependent dynamic pull-in analysis of beam-type MEMS under mechanical shock based on the modified couple stress theory
Masoud Tahani
2015-1
Thermal Bending Analysis of Doubly-Curved Composite Laminated Shell Panels with General Boundary Conditions and Laminations
Masoud Tahani
2015-1
Three dimensional elasticity solution for static and dynamic analysis of multi-directional functionally graded thick sector plates with general boundary conditions
Mehran Kadkhodayan
2015-1
Three-dimensional stress field analysis of rotating thick bidirectional functionally graded axisymmetric annular plates with nonuniform loads and elastic foundations
Mehran Kadkhodayan
2015-1
A Novel Method for Investigating the Casimir Effect on Pull-In Instability of Electrostatically Actuated Fully Clamped Rectangular Nano/Microplates
Masoud Tahani
2015-2
Combination of Modified Yld2000-2d and Yld2000-2d in Anisotropic Pressure Dependent Sheet Metals
Mehran Kadkhodayan
2015-2
Equivalent dynamic thermoviscoelastic modeling of ionic polymers
Masoud Tahani
2015-2
Experimental Study of a Double-Exposure Solar Cooker based on the Parabolic and Flat Reflected Surfaces
Ali Kianifar,Mohammad Moghiman,Mojtaba Mamourian
2015-2
Fluid structures of flapping airfoil with elliptical motion trajectory
Javad Abolfazli Esfahani
2015-2
Hot-spot cooling using microliter liquid drops
Mohammad Passandideh-Fard
2015-2
Nonlinear viscoelastic dynamic modeling of high-speed polypyrrole-based trilayer bending plate-like actuators based on first-order shear deformation plate theory
Masoud Tahani
2015-2
Parametric assessment of a low-swirl burner using the exergy analysis
Mohsen Ghazikhani,Seyyed Mohammad Reza Modarres Razavi
2015-2
Simulation of liquid sloshing in 2D containers using the volume of fluid method
Mohammad Passandideh-Fard
2015-2
The analytical modeling of hydrogen-air mixture in a catalytic micro-channel
Javad Abolfazli Esfahani
2015-2
Two relaxation time lattice Boltzmann equation for high Knudsen number flows using wall function approach
Javad Abolfazli Esfahani
2015-2
An improved hybrid method for forward kinematic analysis of parallel robots
Iman Kardan,Alireza Akbarzadeh Tootoonchi
2015-3
Control of wake and vortex shedding behind a porous circular obstacle by exerting an external magnetic field
Javad Abolfazli Esfahani
2015-3
Effects of Boundary-Layer Bleed Parameters on Supersonic Intake Performance
Javad Sepahi-Younsi
2015-3
Elastic/plastic buckling analysis of skew plates under in-plane shear loading with incremental and deformation theories of plasticity by GDQ method
Mehran Kadkhodayan
2015-3
Elastoplastic torsion of hollow FGM circular shaft
Hamid Ekhteraei Toussi
2015-3
Estimation of convective heat transfer coefficient and water-productivity in a tubular solar still – CFD simulation and theoretical analysis
Javad Abolfazli Esfahani
2015-3
Modified Burzynski criterion with non-associated flow rule for anisotropic asymmetric metals in plane stress problems
Mehran Kadkhodayan
2015-3
Numerical investigation on the lifetime decline of burners in a wall-fired dual-fuel utility boiler
Mohsen Kahrom,Mohammad Passandideh-Fard
2015-3
Bending of Moderately Thick Annular Sector Plates with Variable Thickness and General Boundary Conditions Using Extended Knatorovich Method
Masoud Tahani
2015-4
Effects of shear work on non-equilibrium heat transfer characteristics of rarefied gas flows through micro/nanochannels
Ehsan Roohi
2015-4
Estimation of Convective Heat Transfer Coefficient and Hourly Yield of a Single Slope Solar Still: A Numerical Approach
Ali Kianifar
2015-4
Natural Convection Heat Transfer of Cu-water Nanofluid within a Square Enclosure: A Numerical Investigation
Ali Kianifar
2015-4
Numerical investigation of thermoacoustic refrigerator at weak and large amplitudes considering cooling effect
Ali Kianifar,Ehsan Roohi
2015-4
Numerical Study of Blade Number Effect on the Performance of a 3D FC Centrifugal Fan
Hossein Ajam
2015-4
Numerical study on fatigue crack growth in railway wheels under the influence of residual stresses
Khalil Farhangdoost,Mahmoud Shariati
2015-4
Prediction of forming limit curves (FLD, MSFLD and FLSD) and necking time for SS304L sheet using finite element method and ductile fracture criteria
Mahmoud Shariati,Khalil Farhangdoost
2015-4
Rarefied gas flow behavior in micro/nanochannels under specified wall heat flux
Ehsan Roohi
2015-4
Starting Torque Improvement Using J-Shaped Straight_Bladed Darrieus Vertical Axis Wind Turbine by Means of Numerical Simulation
Mohammad Javad Maghrebi
2015-4
Study of Convergence Time for Rarefied Gas Simulations Using an Unstructured DSMC Solver
2015-4
Study on Jacobian, singularity and kinematics sensitivity of the FUM 3-PSP parallel manipulator
Alireza Akbarzadeh Tootoonchi
2015-4
Thermoelastic damping in a nonlocal nano-beam resonator as NEMS based on the type III of Green–Naghdi theory (with energy dissipation)
Masoud Tahani
2015-4
Transient heat conduction in multiwall carbon nanotubes
Masoud Tahani,Mohammad Hossein Abolbashari
2015-4
A general optimized geometry of angled ribs for enhancing the thermo-hydraulic behavior of a solar air heater channel e A Taguchi approach
Asgar Bradaran Rahimi,Alireza Akbarzadeh Tootoonchi
2015-5
Analytical, experimental and numerical study of a graded honeycomb structure under in-plane impact load with low velocity
Mehran Kadkhodayan,Saeid Hadidi Moud
2015-5
Effect of blade installation on heat transfer and fluid flow within a single slope solar still
Ali Kianifar
2015-5
Elastoplastic buckling analysis of rectangular thick plates by incremental and deformation theories of plasticity
Mehran Kadkhodayan
2015-5
Energy, exergy and economic analysis of a Diesel engine fueled with castor oil biodiesel
Hossein Ajam
2015-5
Low Mach number slip flow through diverging microchannel
Ehsan Roohi
2015-5
Nonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics
Masoud Tahani
2015-5
Rarefied gas flow simulations of NACA 0012 airfoil and sharp 25–55-deg biconic subject to high order nonequilibrium boundary conditions in CFD
Ehsan Roohi
2015-5
The first and second law analysis of a grid connected photovoltaic plant equipped with a compressed air energy storage unit
Mahmood Farzaneh-Gord
2015-5
The Use of Taguchi Method with Grey Relational Analysis to optimize the EDM Process Parameters with Multiple Quality Characteristics
Farhad Kolahan
2015-5
Thermo-economic analysis and sizing of a PV plant equipped with a compressed air energy storage system
Mahmood Farzaneh-Gord
2015-5
Aircraft Propulsion
Ehsan Roohi
2015-6
Adaptive analysis of three-dimensional structures using an isogeometric control net refinement approach
Behrooz Hassani
2015-6
Control of Wake Structure Behind a Square Cylinder by Magnetohydrodynamics
Javad Abolfazli Esfahani
2015-6
Effect of recess length on the flame parameters and combustion performance of a low swirl burner
Javad Abolfazli Esfahani,Seyyed Mohammad Reza Modarres Razavi
2015-6
Effects of Nield number on nanofluid forced convection heat transfer in porous channel: Under local thermal nonequilibrium condition
Mohammad Javad Maghrebi
2015-6
Enhancement of heat transfer by nanofluids and orientations of the equilateral triangular obstacle
Javad Abolfazli Esfahani
2015-6
General thermo-elastic solution of radially heterogeneous, spherically isotropic rotating sphere
Hamid Ekhteraei Toussi
2015-6
Heat Transfer, Pressure Drop, and Entropy Generation in a Solar Collector Using SiO2/Water Nanofluids: Effects of Nanoparticle Size and pH
Ali Kianifar
2015-6
Lift characteristics of pitching NACA0015 airfoil due to unsteady forced surface inflation
Mahmoud Pasandidehfard
2015-6
Performance investigation of a supersonic air intake in the presence of the boundary layer suction
Javad Sepahi-Younsi
2015-6
Semi Analytical Analysis of FGM Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Elastic Modulus under Internal Pressure
Mahmoud Shariati
2015-6
Size-dependent free vibration analysis of electrostatically pre-deformed rectangular micro-plates based on the modified couple stress theory
Masoud Tahani,Behrooz Hassani
2015-6
Thermodynamic analysis of medium pressure reciprocating natural gas expansion engines
Mahmood Farzaneh-Gord
2015-6
Three-dimensional analytical solution for transport problem during convection drying using Green's function method (GFM)
Javad Abolfazli Esfahani
2015-6
A novel method for calculating natural gas density based on Joule Thomson coefficient
Mahmood Farzaneh-Gord
2015-7
Analytical determination of size-dependent natural frequencies of fully clamped rectangular microplates based on the modified couple stress theory
Masoud Tahani
2015-7
Application of smart collocation method for solving strongly nonlinear boundary value ordinary differential equations
Aref Afsharfard,Jalil Rezaee Pazhand
2015-7
Effect of fluid-porous interface conditions on steady flow around and through a porous circular cylinde
Javad Abolfazli Esfahani
2015-7
Effects of natural gas compositions on CNG (compressed natural gas) reciprocating compressors performance
Mahmood Farzaneh-Gord
2015-7
Experimental investigation of a PVT system performance using nano ferrofluids
Mohammad Passandideh-Fard
2015-7
Experimental investigation on the thermal efficiency and performance characteristics of a flat plate solar collector using SiO2/EG– water nanofluids
Ali Kianifar,Hamid Niazmand
2015-7
Investigation of cold-to-hot transfer and thermal separation zone through nano step geometries
Ehsan Roohi
2015-7
Investigation of Different Droplet Formation Regimes in a T-junction Microchannel Using the VOF Technique in OpenFOAM
Ehsan Roohi
2015-7
Optimum parameters of nonlinear integrator using design of experiments based on Taguchi method
Ali Akbar Akbari
2015-7
Position tracking of a 3-PSP parallel robot using dynamic growing interval type-2 fuzzy neural control
Alireza Akbarzadeh Tootoonchi
2015-7
SEMG-based prediction of masticatory kinematics in rhythmic clenching movements
Alireza Akbarzadeh Tootoonchi
2015-7
An experimental investigation into the warm deep-drawing process on laminated sheets under various grain sizes
Mehran Kadkhodayan
2015-8
Analysis of flow and LDL concentration polarization in siphon of internal carotid artery: Non-Newtonian effects
Hamid Niazmand
2015-8
Detailed Investigation of Flow and Thermal Field in Micro/Nano Nozzle using Simplified Bernoulli Trial (SBT) collision Scheme in DSMC
Ehsan Roohi
2015-8
Numerical investigation on heat transfer characteristics amelioration of a solar chimney power plant through passive flow control approach
Mohsen Ghazikhani
2015-8
Prediction of Stress Shielding Around Orthopedic Screws: Time-Dependent Bone Remodeling Analysis Using Finite Element Approach
Masoud Tahani
2015-8
Proposed kinematic model for fish-like swimming with two pitch motions
Javad Abolfazli Esfahani
2015-8
Source term prediction in a multilayer tissue during hyperthermia
Mohammad Bagher Ayani
2015-8
Structural optimization of nanofluid flow around an equilateral triangular obstacle
Javad Abolfazli Esfahani
2015-8
Thermodynamic analysis of natural gas reciprocating compressors based on real and ideal gas models
Mahmood Farzaneh-Gord
2015-8
Three Dimensional Natural Frequency Analysis of Sandwich Plates with Functionally Graded Core Using Hybrid Meshless Local Petrov-Galerkin Method and Artificial Neural Network
Mohammad Hossein Abolbashari
2015-8
Timing optimization of single-stage single-acting reciprocating expansion engine based on exergy analysis
Mahmood Farzaneh-Gord
2015-8
A new design for natural gas pressure reduction points by employing a turbo expander and a solar heating set
Mahmood Farzaneh-Gord
2015-9
An investigation of the fatigue of CK45 steel in the as‐received state and after pre‐fatigue deformation
Mahmoud Shariati
2015-9
Low-density lipoprotein accumulation within a carotid artery with multilayer elastic porous wall: fluid–structure interaction and non-Newtonian considerations
Hamid Niazmand
2015-9
Mathematical modeling of fast filling process at CNG refueling stations considering connecting pipes
Mahmood Farzaneh-Gord
2015-9
New implementation of a non-associated flow rule in rate independent plasticity
Mehran Kadkhodayan
2015-9
Numerical and experimental investigation of a three dimensional spherical-nose projectile water entry problem
Mohammad Moghiman
2015-9
Numerical simulation of the tumor interstitial fluid transport: Consideration of drug delivery mechanism
Hamid Niazmand
2015-9
Optimal Design of Magnetorheological Fluid Damper Based on Response Surface Method
Mohammad Hassan Djavareshkian,Ali Esmaeili
2015-9
Optimization of the parabolic mirror position in a solar cooker using the response surface method (RSM)
Mohammad Moghiman,Ali Kianifar
2015-9
Optimizing natural gas reciprocating expansion engines for Town Border pressure reduction stations based on AGA8 equation of state
Mahmood Farzaneh-Gord
2015-9
Statistical analysis of the parameters influencing the mechanical properties of layered MWCNTs/PVC nanocomposites
Mahmoud Shariati
2015-9
An Experimental Study on Toughening Mechanisms of Fillers in Epoxy/ Silica Nanocomposites
Mahmoud Shariati
2015-10
An optimised back propagation neural networkapproach and simulated annealing algorithm towards optimisation of EDM process parameteroptimisation of EDM process parameters
Farhad Kolahan
2015-10
Experimental Study of Heat Transfer Enhancement in a Heated Tube Caused by Wire-Coil and Rings
Mohsen Kahrom
2015-10
Heat Transfer Enhancement and Pressure Drop Penalty in Porous Solar Exchangers: A Sensitivity Analysis
Javad Abolfazli Esfahani
2015-10
Modification of k-ε Turbulent Model Using Kinetic Energy–Preserving Method
Mahmoud Pasandidehfard
2015-10
On thermomechanical stress analysis of adhesively bonded composite joints in presence of an interfacial void
Masoud Tahani,Seyed Abdolmajid Yousefsani
2015-10
Simulation of power extraction from tidal currents by flapping foil hydrokinetic turbines in tandem formation
Javad Abolfazli Esfahani
2015-10
Static analysis of variable thickness two‑directional functionally graded annular sector plates fully or partially resting on elastic foundations by the GDQ method
Mahmoud Shariati
2015-10
The effect of magnetic field on instabilities of heat transfer from an obstacle in a channel
Javad Abolfazli Esfahani
2015-10
A novel simplified Bernoulli trials collision scheme in the direct simulation Monte Carlo with intelligence over particle distances
Ehsan Roohi
2015-11
An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm
Farhad Kolahan
2015-11
Application of statistical techniques in modeling and optimization of a snake robot
Alireza Akbarzadeh Tootoonchi
2015-11
Effect of nano particles on heat transfer in heat exchangers
Mohammad Moghiman
2015-11
Finite element modeling of a wind turbine blade
Ali Akbar Akbari
2015-11
Free vibration analysis of thick disks with variable thickness containing orthotropic-nonhomogeneous material using finite element method
Mehran Kadkhodayan
2015-11
Low velocity impact and quasi-static in-plane loading on a graded honeycomb structure; experimental, analytical and numerical study
Mehran Kadkhodayan,Saeid Hadidi Moud
2015-11
On a novel solid lubricant–coated cutting tool: Experimental investigation and finite element simulations
Amir Ghandehariun
2015-11
Optimal sizing of power generation unit capacity in ICE-driven CCHP systems for various residential building sizes
Mahmood Farzaneh-Gord
2015-11
A Comparison of Fuzzy Type s 1 and 2 in Diabetics Control, Based on Augmented Minimal Model
Ali Akbar Akbari
2015-12
A Hybrid Neural Network Approach for Kinematic Modeling of a Novel 6-UPS Parallel Human-Like Mastication Robot
Alireza Akbarzadeh Tootoonchi
2015-12
A Modified Couple Stress Theory for Postbuckling Analysis of Timoshenko and Reddy-Levinson Single-Walled Carbon Nanobeams
Mahmoud Shariati
2015-12
A new form of the second order temperature jump boundary condition for the low-speed nanoscale and hypersonic rarefied gas flow simulations
Ehsan Roohi
2015-12
A Novel Algorithm for Implementing Specified Wall Hat Flux in DSMC: Application to Micro/Nano Flows and Hypersonic Flows
Ehsan Roohi
2015-12
Application of orthogonal array technique and particle swarmoptimization approach in surface roughness modification when face milling AISI1045 steel parts
Farhad Kolahan
2015-12
Buckling Analysis of Variable Thickness Radially Functionally Graded Annular Sector Plates Resting on Two-Parameter Elastic Foundations by the GDQ Method
Mahmoud Shariati
2015-12
Design a mechanism Like flapping hummingbird wings
Mohammad Hassan Djavareshkian
2015-12
DSMC simulation of hypersonic flows using an improved SBT-TAS technique
Ehsan Roohi
2015-12
Dynamic response of multiwall boron nitride nanotubes subjected to impact
Masoud Tahani
2015-12
Numerical study of flow patterns and heat transfer in mini twisted oval tubes
Ehsan Roohi
2015-12
Optimisation of broiler chicken responses from 0 to 7 d of age to dietary leucine, isoleucine and valine using Taguchi and mathematical methods
Farhad Kolahan
2015-12
Performance assessment of a natural gas expansion plant integrated with a vertical ground-coupled heat pump
Mahmood Farzaneh-Gord
2015-12
Prismatic Series Elastic Actuator: Modeling and Control by ICA and PSO-tuned Fractional Order PID
Alireza Akbarzadeh Tootoonchi
2015-12
Unsteady natural gas flow within pipeline network, an analytical approach
Mahmood Farzaneh-Gord
2015-12
variable Impedance Control for Rehabilitation Robot Using Interval Type-2 Fuzzy Logic
Alireza Akbarzadeh Tootoonchi,Hamid Moeenfard
2015-12
Vehicle Model Recognition Using Image Processing and Wavelet Analysis
Ali Akbar Akbari
2015-12
Vibration suppression of down-scaled frames using a multi-criteria sensor/actuator placement algorithm
Jalil Rezaee Pazhand
2015-12
A constraint model for beam flexure modules with an intermediate semi-rigid element
Hamid Moeenfard
2016-1
A modified Burzynski criterion for anisotropic pressure-dependent materials
Mehran Kadkhodayan
2016-1
A novel flexure beam module with low stiffness loss in compliant mechanisms
Hamid Moeenfard
2016-1
An analytical procedure to study vibration of rectangular plates under non-uniform in-plane loads based on first-order shear deformation theory
Mahmoud Shariati
2016-1
Analysis of different techniques to improve sound transmission loss in cylindrical shells
Anoshirvan Farshidianfar
2016-1
Analysis of tool-particle interactions during cutting process of metal matrix composites
Amir Ghandehariun
2016-1
Approximate analytical solution for vibration of a 3-PRP planar parallel robot with flexible moving platform
Alireza Akbarzadeh Tootoonchi
2016-1
Capturing Non-equilibrium Effects of Micro/Nano Scale Gaseous Flow Using a Novel Lattice Boltzmann Model
Javad Abolfazli Esfahani
2016-1
Development of a multi-level adaptive fuzzy controller for beyond pull-in stabilization of electrostatically actuated microplates
Hamid Moeenfard
2016-1
Development of robust and adaptive controller for blade testing machine
Behnam Moetakef Imani
2016-1
Effect of acceleration on dynamic stall of airfoil in unsteady operating conditions
Javad Abolfazli Esfahani
2016-1
Elastic-plastic analysis of pressure vessels and rotating disks made of functionally graded materials using the isogeometric approach
Behrooz Hassani,Saeid Hadidi Moud
2016-1
Energy, exergy, and cost analyses of a double-glazed solar air heater using phase change material
Ali Kianifar
2016-1
Exergy destruction analysis of a vortices generator in a gas liquid finned tube heat exchanger: an experimental study
Mohsen Ghazikhani
2016-1
Experimental and numerical investigation of nanofluids heat transfer characteristics for application in solar heat exchangers
Hamid Niazmand
2016-1
Fatigue life assessment of adhesive joints based on ratchetting strain evolution
Khalil Farhangdoost
2016-1
Geometrically non-linear bending analysis of thick two-directional functionally graded annular sector and rectangular plates with variable thickness resting on non-linear elastic foundation
Mahmoud Shariati
2016-1
Heat transfer enhancement and pressure drop penalty in porous solar heaters: Numerical simulations
Javad Abolfazli Esfahani
2016-1
Impacts of Synchronous Combustion of Small Amounts of Coal Particles with Natural Gas on Enhancing Radiative Characteristic and NOx Flame Pollutant Emission
Mohammad Moghiman
2016-1
Innovative approach to computer-aided design of horizontal axis wind turbine blades
Behnam Moetakef Imani
2016-1
Investigation of cavitation around 3D hemispherical head-form body and conical cavitators using different turbulence and cavitation models
Ehsan Roohi
2016-1
Lattice Boltzmann simulation of a Cu-water nanofluid filled cavity in order to investigate the influence of volume fraction and magnetic field specifications on flow and heat transfer
Mohammad Hassan Djavareshkian
2016-1
Lattice Boltzmann simulation of EGM and solid particle trajectory due to conjugate natural convection
Javad Abolfazli Esfahani
2016-1
Non-Newtonian effects of blood on LDL transport inside the arterial lumen and across multi-layered arterial wall with and without stenosis
Hamid Niazmand
2016-1
Numerical and experimental investigation on effects of inlet humidity and fuel flow rate and oxidant on the performance on polymer fuel cell
Mohsen Ghazikhani
2016-1
Numerical and model validation of uncovered nanofluid sheet and tube type photovoltaic thermal solar system
Mohammad Passandideh-Fard
2016-1
Numerical Stabilization of Three-Dimensional Turbulent Natural Convection Around Isothermal Cylinder
Javad Abolfazli Esfahani
2016-1
Quadrotors Unmanned Aerial Vehicles: A Review
Ali Akbar Akbari
2016-1
Robust adaptive mixed H2/H interval type-2 fuzzy control of nonlinear uncertain systems with minimal control effort
Alireza Akbarzadeh Tootoonchi
2016-1
Simulation of ThreeDimensional Cavitation behind a Disk using Various Turbulence and Mass Transfer Models
Ehsan Roohi
2016-1
Simultaneous selection and scheduling with sequence-dependent setup times, lateness penalties, and machine availability constraint: Heuristic approaches
Farhad Kolahan
2016-1
Solar stills: A review of the latest developments in numerical simulations
Ali Kianifar
2016-1
Sound localization in an anisotropic plate using electret microphones
Majid Moavenian
2016-1
Specific cutting force and cutting condition interaction modeling for round insert face milling operation
Behnam Moetakef Imani
2016-1
Sustainability investigation of drilling: exergy analysis of conventional and peck drilling approaches
Amir Ghandehariun
2016-1
Sustainable manufacturing and its application in machining processes: a review
Amir Ghandehariun
2016-1
Thermodynamic analysis of a CNG refueling station considering the reciprocating compressor
Mahmood Farzaneh-Gord
2016-1
Trajectory tracking of under-actuated nonlinear dynamic robots: Adaptive fuzzy hierarchical terminal sliding-mode control
Anoshirvan Farshidianfar
2016-1
An analytical model for vibration and control of a PR-PRP parallel robot with flexible platform and prismatic joint
Alireza Akbarzadeh Tootoonchi
2016-2
An analytical solution for thermoelastic damping in a micro-beam based on generalized theory of thermoelasticity and modified couple stress theory
Masoud Tahani
2016-2
An analytical study of controlling chaotic dynamics in a spur gear system
Anoshirvan Farshidianfar
2016-2
Axisymmetric Stagnation Flow and Heat Transfer of a Compressible Fluid Impinging on a Cylinder Moving Axially
Asgar Bradaran Rahimi
2016-2
Characterization of the static behavior of electrically actuated micro-plates using extended Kantorovich method
Hamid Moeenfard
2016-2
Comment on “Effects of thermophoresis and Brownian motion on nanofluid heat transfer and entropy generation” by M. Mahmoodi, Sh. Kandelousi, Journal of Molecular Liquids, 211 (2015) 15–24.
Asgar Bradaran Rahimi
2016-2
Dynamic Stability of Laminated Composite Plates with an External Smart Damper
Jalil Rezaee Pazhand
2016-2
Dynamics and vibration of a 3-PSP parallel robot with flexible moving platform
Alireza Akbarzadeh Tootoonchi
2016-2
Effect of changing the water balance on electro-osmotic flow in an elliptical single proton exchange membrane fuel cell
Mohsen Ghazikhani
2016-2
Effect of wear on rolling contact fatigue crack growth in rails
Mahmoud Shariati,Khalil Farhangdoost
2016-2
Elasto-Plastic Stress Analysis in Rotating Disks and Pressure Vessels Made of Functionally Graded Materials
Saeid Hadidi Moud,Behrooz Hassani
2016-2
Nonlinear bending analysis of variable cross-section laminated plates using the dynamic relaxation method
Jalil Rezaee Pazhand
2016-2
Novel natural gas molecular weight calculator equation as a functional of only temperature, pressure and sound speed
Mahmood Farzaneh-Gord
2016-2
Sensitivity Analysis of Entropy Generation in Nanofluid Flow inside a Channel by Response Surface Methodology
Javad Abolfazli Esfahani
2016-2
Static and fatigue mechanical behavior of three dental CAD/CAM ceramics
Khalil Farhangdoost
2016-2
Suppressing forced vibrations of structures using smart vibro-impact systems
Aref Afsharfard
2016-2
The influence of welding parameters on fracture toughness and fatigue crack growth rate in friction stir welded nugget of 2024-T351 aluminum alloy joints
Khalil Farhangdoost
2016-2
Three-Dimensional Simulation of Rolling Contact Fatigue Crack Growth in UIC60 Rails
Khalil Farhangdoost,Mahmoud Shariati
2016-2
Unaxisymmetric stagnation‑ point flow and heat transfer of a viscous fluid on a moving cylinder with time‑dependent axial velocity
Asgar Bradaran Rahimi
2016-2
An advanced criterion based on non-AFR for anisotropic sheet metals
Mehran Kadkhodayan
2016-3
An experimental and numerical study of supercavitating flows tric cavitators
Hossein Ajam
2016-3
Analytical modeling of large amplitude free vibration of non-uniform beams carrying a both transversely and axially eccentric tip mass
Hamid Moeenfard
2016-3
Application of statistical techniques and artificial neural network to estimate force from sEMG signals
Alireza Akbarzadeh Tootoonchi
2016-3
Buzz Cycle Description in an Axisymmetric Mixed-Compression Air Intake
Javad Sepahi-Younsi
2016-3
Control of flow around a circular cylinder wrapped with a porous layer by magnetohydrodynamic
Javad Abolfazli Esfahani
2016-3
Effect of Tool Speed on Axial Force, Mechanical Properties and Weld Morphology of Friction Stir Welded Joints of A7075-T651
Farhad Kolahan
2016-3
Experimental investigation of nanofluid free convection over the vertical and horizontal flat plates with uniform heat flux by PIV
Javad Abolfazli Esfahani
2016-3
Geometrically nonlinear dynamic analysis of functionally graded thick hollow cylinders using total Lagrangian MLPG method
Mohammad Hossein Abolbashari
2016-3
Interval-valued fuzzy derivatives and solution to interval-valued fuzzy differential equations
Alireza Akbarzadeh Tootoonchi,Iman Kardan
2016-3
Investigation of Three-Dimensional Axisymmetric Unsteady Stagnation-Point Flow and Heat Transfer Impinging on an Accelerated Flat Plate
Asgar Bradaran Rahimi
2016-3
Machining metal matrix composites: novel analytical force model
Amir Ghandehariun
2016-3
On machining modeling of metal matrix composites: A novel comprehensive constitutive equation
Amir Ghandehariun
2016-3
Opposition of Magnetohydrodynamicand AL2O3-waternanofluidflow around a vertex facing triangular obstacle
Javad Abolfazli Esfahani
2016-3
Performance analysis of sloped solar chimney power plants in the southwestern region of Iran
Mohammad Javad Maghrebi
2016-3
Performance assessment of vortex tube and vertical ground heat exchanger in reducing fuel consumption of conventional pressure drop stations
Mahmood Farzaneh-Gord
2016-3
Sheet Electromagnetic Forming using convex punch instead of concave die
Mehran Kadkhodayan
2016-3
A novel method for maximum lift prediction in high-lift configurations
Mahmoud Pasandidehfard
2016-4
An investigation of stress wave propagation in a shear deformable nanobeam based on modified couple stress theory
Mahmoud Shariati
2016-4
Dynamic Stall Analysis of S809 Pitching Airfoil in Unsteady Free Stream Velocity
Mohammad Javad Maghrebi
2016-4
Entropy analysis of a solar-driven variable geometry ejector using computational fluid dynamics
Mohsen Ghazikhani,Seyyed Mohammad Reza Modarres Razavi
2016-4
Flow and thermal fields investigation in divergent micro/nano channels
Ehsan Roohi
2016-4
Mechanical characteristics of CNT-reinforced metallic glass nanocomposites by molecular dynamics simulations
Mahmoud Shariati
2016-4
Natural convection of silica nanofluids in square and triangular enclosures: Theoretical and experimental study
Ali Kianifar
2016-4
Numerical study of airfoil thickness effects on the performance of J-shaped straight blade vertical axis wind turbine
Mohammad Javad Maghrebi
2016-4
Postbuckling of functionally graded nanobeams based on modified couple stress theory under general beam theory
Mahmoud Shariati
2016-4
Similarity Solutions of Unsteady Three-Dimensional Stagnation Flow and Heat Transfer of a Viscous, Compressible Fluid on an Accelerated Flat Plate
Asgar Bradaran Rahimi
2016-4
Some considerations on instability of combined loaded thin-walled tubes with a crack
Mahmoud Shariati
2016-4
The power extraction by flapping foil hydrokinetic turbine in swing arm mode
Javad Abolfazli Esfahani
2016-4
Three-dimensional finite element simulation of residual stresses in UIC60 rails during the quenching process
Mahmoud Shariati,Khalil Farhangdoost
2016-4
Three-Dimensional Unsteady Stagnation-Point Flow and Heat Transfer Impinging Obliquely on a Flat Plate with Transpiration
Asgar Bradaran Rahimi
2016-4
Trajectory generation and control of a knee exoskeleton based on dynamic movement primitives for sit-to-stand assistance
Ali Akbar Akbari,Alireza Akbarzadeh Tootoonchi
2016-4
Aerodynamic and dynamic analyses of three common 4.5 mm-caliber pellets in a transonic flow
Ali Reza Teymourtash
2016-5
Automated Diffuser Shape Optimization based on CFD Simulations and Surrogate Modeling
Hossein Ajam
2016-5
Discrete particle model for convective AL2O3-water nanofluid around a triangular obstacle
Javad Abolfazli Esfahani
2016-5
Experimental analysis of the low cycle fatigue of a spray-coated layered multi-walled carbon nanotubes/polyvinyl chloride nanocomposite
Mahmoud Shariati
2016-5
Heat transfer and entropy generation in a microchannel with longitudinal vortex generators using nanofluids
Ehsan Roohi
2016-5
Nanofluid flow and heat transfer in a microchannel with longitudinal vortex generators: Two-phase numerical simulation
Ehsan Roohi,Hamid Niazmand
2016-5
Second law analysis of a nanofluid-based solar collector using experimental data
Ali Kianifar
2016-5
Simulation of Partial and Supercavitating Flows around Axisymmetric and Quasi-3D Bodies by Boundary Element Method Using Simple and Reentrant Jet Models at the ClosureZone of Cavity
Mahmoud Pasandidehfard,Mohammad Hassan Djavareshkian
2016-5
Stability analysis of electrostatically actuated nano/micro-beams under the effect of van der Waals force, a semi-analytical approach
Masoud Tahani
2016-5
TowardsanSEMG-basedtele-operatedrobotformasticatory rehabilitation
Alireza Akbarzadeh Tootoonchi
2016-5
A three dimensional simulation of a rubber curing process considering variable order of reaction
Mohammad Moghiman
2016-6
An experimental investigation on productivity and performance of a new improved design portable asymmetrical solar still utilizing thermoelectric modules
Javad Abolfazli Esfahani
2016-6
Control of wake destructive behavior for different bluff bodies in channel flow by magnetohydrodynamics
Javad Abolfazli Esfahani
2016-6
Effects of Bleed Position on the Stability of a Supersonic Inlet
Javad Sepahi-Younsi
2016-6
Magnetohydrodynamic effects on flow structures and heat transfer over two cylinders wrapped with a porous layer in side
Javad Abolfazli Esfahani
2016-6
Microstructure and Residual Stress Distributions Under the Influence of Welding Speed in Friction Stir Welded 2024 Aluminum Alloy
Khalil Farhangdoost
2016-6
Modeling and Vibration Characteristics of Cracked Nano-Beams Made of Nanocrystalline Materials
Mahmoud Shariati
2016-6
Modification of Glucose biosensor using Pt/MWCNTs electrode and optimization by application of taguchi method
Mohammad Javad Maghrebi,Ali Reza Teymourtash
2016-6
On tool–workpiece interactions during machining metal matrix composites: investigation of the effect of cutting speed
Amir Ghandehariun
2016-6
Optimization of Biodiesel Production Using Multi-Objective Genetic Algorithm
Ali Akbar Akbari
2016-6
THE COMPLETE MODELLING OF THE FILLING PROCESS OF HYDROGEN ONBOARD VEHICLE CYLINDERS
Hamid Niazmand
2016-6
The effect of parameterization on isogeometric analysis of free-form curved beams
Behnam Moetakef Imani,Saeid Hadidi Moud,Behrooz Hassani
2016-6
Unaxisymmetric Stagnation-point Flow And Heat Transfer of A Viscous Fluid With Variable Viscosity On A Cylinder In Constsnt Heat Flux
Asgar Bradaran Rahimi
2016-6
Vibration analysis of rotating composite beams using polyn dimensional reduction method
Jalil Rezaee Pazhand
2016-6
A Comprehensive Comparison of Classical and Modern Controllers in the Steam Level of a Power Plant
Ali Akbar Akbari
2016-7
A new design of Ranque-Hilsch vortex tube:helical multi-intakevortex generator
Javad Abolfazli Esfahani
2016-7
Aerodynamic shape study of supersonic surface to surface missiles with continuous flexible nose
Mahmoud Pasandidehfard,Mohammad Hassan Djavareshkian
2016-7
Exergy analysis of two humidification process methods inair-conditioning systems
Mohsen Ghazikhani
2016-7
Experimental and numerical study of metal-oxides/water nanofluids as coolant in photovoltaic thermal systems (PVT)
Mohammad Passandideh-Fard
2016-7
Free vibration analysis of sigmoid functionally graded nanobeams based on a modified couple stress theory with general shear deformation theory
Mahmoud Shariati
2016-7
Mass and performance optimization of an airplane wing leading edge structure against bird strike using Taguchi based grey relational analysis
Mohammad Hossein Abolbashari
2016-7
Modeling for thermal augmentation of turbulent flow in a circular tube fitted with twisted conical strip inserts
Hossein Ajam
2016-7
Multi-variable measurements and optimization of GMAW parameters for API-X42 steel alloy using a hybrid BPNN–PSO approach
Farhad Kolahan
2016-7
Non-linear Thermo-mechanical Bending Behavior of Thin and Moderately Thick Functionally Graded Sector Plates Using Dynamic Relaxation Method
Mehran Kadkhodayan
2016-7
Numerical Investigation of Water Drop Movement within a Microchannel under Electrowetting Phenomenon
Mohammad Passandideh-Fard
2016-7
Simulation of a single droplet impact onto a thin liquid film using the lattice Boltzmann method
Mohammad Passandideh-Fard,Hamid Niazmand
2016-7
Stress Intensity Factors Evaluation for Rolling Contact Fatigue Cracks in Rails
Khalil Farhangdoost,Mahmoud Shariati,Majid Moavenian
2016-7
Tire Inflation Pressure Estimation Using Identification Techniques
Ali Akbar Akbari
2016-7
Vibration analysis of orthotropic circular and elliptical nano-plates embedded in elastic medium based on nonlocal Mindlin plate theory and using Galerkin method
Masoud Tahani
2016-7
Vibration and stability of laminated composite orthogrid plates
Jalil Rezaee Pazhand
2016-7
A novel approach for monitoring and improving the quality of welded joint in GMAW process using adaptive neurofuzzy systems
Farhad Kolahan
2016-8
Correlations for estimating natural gas leakage from above-ground and buried urban distribution pipelines
Mahmood Farzaneh-Gord
2016-8
Effects of Shock Wave/Boundary-Layer Interaction on Performance and Stability of a Mixed-Compression Inlet
Javad Sepahi-Younsi
2016-8
Effects of trap and reflect particle boundary conditions on particle transport and convective heat transfer for duct flow-A two-way coupling of Eulerian-Lagrangian Model
Javad Abolfazli Esfahani
2016-8
Enhancement of heat transfer and heat exchanger effectiveness in a double pipe heat exchanger filled with porous media: Numerical simulation and sensitivity analysis of turbulent fluid flow
Mojtaba Mamourian
2016-8
Fatigue resistance of monolithic CAD/CAM ceramic crowns on human premolars
Khalil Farhangdoost
2016-8
Fatigue Strength and Fatigue Fracture Mechanism for Spot Welds in U-Shape Specimens
Mahmoud Shariati
2016-8
Interlaminar stresses in thick cylindrical shell with arbitrary laminations and boundary conditions under transverse loads
Masoud Tahani
2016-8
Locating the acoustic source in thin glass plate using low sampling rate data
Majid Moavenian
2016-8
Minimization of Exergy Losses in a TrapezoidalDuct with Turbulator, Roughness and Beveled corners
Javad Abolfazli Esfahani
2016-8
Natural gas compositions variation effect on capillary tube thermal mass flow meter performance
Mahmood Farzaneh-Gord
2016-8
Numerical and Experimental Study of Buckling of Rectangular Steel Plates with a Cutout
Mahmoud Shariati
2016-8
Recovery of drop in heat transfer rate for a rotating system by nanofluids
Javad Abolfazli Esfahani
2016-8
The Effects of Connecting Region Length on the Natural Frequencies of Straight and Non-straight Hetero-junction Carbon Nanotubes
Mohammad Hossein Abolbashari
2016-8
Two phase simulation and sensitivity analysis of effective parameters on combined heat transfer and pressure drop in a solar heat exchanger filled with nanofluid by RSM
Mojtaba Mamourian
2016-8
Two phase simulation and sensitivity analysis of effective parameters on turbulent combined heat transfer and pressure drop in a solar heat exchanger filled with nanofluid by Response Surface Methodology
Mojtaba Mamourian
2016-8
Vortex generators position effect on heat transfer and nanofluid homogeneity: A numerical investigation and sensitivity analysis
Mojtaba Mamourian,Asgar Bradaran Rahimi
2016-8
A frequency criterion for doubly clamped beam-type N/MEMS subjected to the van der Waals attraction
Masoud Tahani,Hamid Moeenfard
2016-9
An investigation into finding the optimum combination for dental restorations
Khalil Farhangdoost
2016-9
Defining a technical criterion for economic justification of employing CHP technology in city gate stations
Mahmood Farzaneh-Gord
2016-9
Exact stress and deformation analysis in elastoplastic Ramberg-Osgood beam
Hamid Ekhteraei Toussi
2016-9
Hygro-thermo-electro-elastic response of a functionally graded piezoelectric cylinder resting on an elastic foundation subjected to non-axisymmetric loads
Mohammad Hossein Abolbashari
2016-9
Numerical simulation and sensitivity analysis of effective parameters on heat transfer and homogeneity of Al2O3 nanofluid in a channel using DPM and RSM
Mojtaba Mamourian
2016-9
Optimization of mixed convection heat transfer with entropy generation in a wavy surface square lid-driven cavity by means of Taguchi approach
Mojtaba Mamourian,Asgar Bradaran Rahimi
2016-9
Stacking sequence optimization of laminated composite grid plates for maximum buckling load using genetic algorithm
Jalil Rezaee Pazhand
2016-9
Tube-in-tube helical heat exchangers performance optimization by entropy generation minimization approach
Mahmood Farzaneh-Gord
2016-9
Valve fault detection for single-stage reciprocating compressors
Mahmood Farzaneh-Gord
2016-9
FUZZY BASED PREDICTION OF MODIFIED RANKINE SCALE -MRS- OF PATIENTS WITH INTRACRANIAL ANEURYSM
Hamid Moeenfard
2016-10
A Physics-Based Model for Metal Matrix Composites Deformation During Machining: A Modified Constitutive Equation
Amir Ghandehariun
2016-10
A salient reduction of energy consumption and drying time in a novel PV-solar collector-assisted intermittent infrared dryer
Javad Abolfazli Esfahani
2016-10
Collision partner selection schemes in DSMC: From micro/nano flows to hypersonic flows
Ehsan Roohi
2016-10
Cyclic behavior of SS316L cylindrical shells under pure torsional load: An experimental investigation
Mahmoud Shariati
2016-10
Generalized coupled non-Fickian/non-Fourierian diffusion-thermoelasticity analysis subjected to shock loading using analytical method
Mohammad Hossein Abolbashari
2016-10
Green's function method (GFM) and mathematical solution for coupled equations of transport problem during convective drying
Javad Abolfazli Esfahani
2016-10
Integration of vertical ground-coupled heat pump into a conventional natural gas pressure drop station: Energy, economic and CO2 emission assessment
Mahmood Farzaneh-Gord
2016-10
Numerical simulation and sensitivity analysis of effective parameters on natural convection and entropy generation in a wavy surface cavity filled with a nanofluid using RSM
Mojtaba Mamourian
2016-10
Optimization of partitioning inside a single slope solar still for performance improvement
Javad Abolfazli Esfahani
2016-10
Variable Pitch Blades: An Approach For Improving Performance Of Darrieus Wind Turbine
Mohammad Javad Maghrebi
2016-10
بررسی تجربی پارامترهای یک بالزن در پرواز ایستا بر عملکرد آیرودینامیکی
Mohammad Hassan Djavareshkian
2016-10
Entropy generation analysis of free convection from a constant temperature vertical plate using similarity solution
Javad Abolfazli Esfahani
2016-11
FLOW AND HEAT TRANSFER SIMULATION OF THREE DIFFERENT NANOFLUIDS IN A CAVITY WITH SINUSOIDAL BOUNDARY CONDITIONS UNDER THE INFLUENCE OF AN INCLINED MAGNETIC FIELD USING LBM: A PHASE DEVIATION APPROACH
Mohammad Hassan Djavareshkian
2016-11
Homotopy simulation of micro-scale flow between rotating disks
Asgar Bradaran Rahimi
2016-11
Innovative adaptive pitch control for small wind turbine fatigue load reduction
Behnam Moetakef Imani
2016-11
Investigation of buckling behavior of functionally graded piezoelectric (FGP) rectangular plates under open and closed circuit conditions
Mehran Kadkhodayan
2016-11
Non-axisymmetric stagnation-point flow and heat transfer of a viscous fluid on a stationary cylinder
Asgar Bradaran Rahimi
2016-11
Three-Dimensional Stagnation- Point Flow and Heat Transfer of a Dusty Fluid Toward a Stretching Sheet
Asgar Bradaran Rahimi
2016-11
Vortex shedding suppression and wake control: A review
Javad Abolfazli Esfahani
2016-11
A Comparison between Energy Balance Method and Coupled Homotopy-Variational Approach to a Nonlinear Free Vibration of a System with Inertia and Static Type Cubic Nonlinearity
Anoshirvan Farshidianfar
2016-12
A Micromachining Approach to Improve the Uniformity of the Topography of Micro Channel
Behnam Moetakef Imani
2016-12
Application of Magnetohydrodynamic for suppressing the fluctuations in unsteady flow around two side-by-side circular obstacles
Javad Abolfazli Esfahani
2016-12
Ductile Failure and Safety Optimization of Gas Pipeline
Abdolrahman Jaamialahmadi,Mahmoud Shariati
2016-12
Heat transfer characteristics of slip flow over solid spheres
Hamid Niazmand
2016-12
Modeling of Dynamic Behavior and Estimation of Damage Incurred by Self-Centering Rocking Walls
Behrooz Hassani
2016-12
Nonlinear free and forced vibrations of curved single-walled carbon nanotube on a Pasternak elastic foundation
Anoshirvan Farshidianfar,Masoud Tahani
2016-12
Numerical study of non-Fourier heat conduction in a biolayer spherical living tissue during hyperthermia
Mohammad Bagher Ayani
2016-12
Selecting optimal volume ratio of reservoir tanks in CNG refueling station with multi-line storage system
Mahmood Farzaneh-Gord
2016-12
Sensitivity analysis for MHD effects and inclination angles on natural convection heat 2 transfer and entropy generation of Al2O3-water nanofluid in square cavity by Response 3 Surface Methodology
Mojtaba Mamourian
2016-12
Three dimensional simulation of J-shaped Darrieus vertical axis wind turbine
Mohammad Javad Maghrebi
2016-12
A Taguchi approach for numerical investigation of CO emission from a non‑ premixed methane– air flame
Mohammad Moghiman,Alireza Akbarzadeh Tootoonchi
2017-1
A three-dimensional numerical approach on water entry of a horizontal circular cylinder using the volume of fluid technique
Mohammad Passandideh-Fard
2017-1
An analytical solution for axisymmetric buckling of annular plates based on perturbation technique
Mahmoud Shariati
2017-1
Analytical modeling of nonlinear vibrations in a 2-DOF airfoil device based on an unsteady flow model
Hamid Moeenfard
2017-1
Application of nonlinear magnetic vibro-impact vibration suppressor and energy harvester
Aref Afsharfard
2017-1
Compressibility effects on the flow past a rotating cylinder
Ali Reza Teymourtash
2017-1
Control of interaction between MHD and nanofluid for thermal and drag management by RSM
Javad Abolfazli Esfahani
2017-1
Design of a noninvasive and smart hand tremor attenuation system with active control: a simulation study
Aref Afsharfard
2017-1
Effect of a new specimen size on fatigue crack growth behavior in thick-walled pressure vessels
Mahmoud Shariati
2017-1
Effects of wavy surface characteristics on natural convection heat transfer in a cosine corrugated square cavity filled with nanofluid
Mojtaba Mamourian,Mohammad Moghiman
2017-1
Enhance heat transfer for phase-change materials in triplex tube heat exchanger with selected arrangements of fins
Asgar Bradaran Rahimi
2017-1
Exergy analysis for a plate- fin triangular duct enhanced by a porous material
Javad Abolfazli Esfahani
2017-1
Experimental investigation of the effects of using nano/phase change materials (NPCM) as coolant of electronic chipsets, under free and forced convection
Mohammad Passandideh-Fard
2017-1
Increment of mixed convection heat transfer and decrement of drag coefficient in a lid-driven nanofluid-filled cavity with a conductive rotating circular cylinder at different horizontal locations: A sensitivity analysis
Mojtaba Mamourian
2017-1
Isogeometric analysis of functionally graded plates using a new quasi-3D shear deformation theory based on physical neutral surface
Behrooz Hassani
2017-1
Large eddy simulation of the flameless oxidation in the IFRF furnace with varying inlet conditions
Javad Abolfazli Esfahani
2017-1
Lattice Boltzmann simulation of 3- dimensional natural convection heat transfer of CuO / water nanofluids
Javad Abolfazli Esfahani
2017-1
Load-displacement behavior of fundamental flexure modules interconnected with compliant elements
Hamid Moeenfard
2017-1
New approach for estimating the cooling capacity of the absorption and compression chillers in a trigeneration system
Hamid Niazmand
2017-1
Nonlocal modeling and buckling features of cracked nanobeams with von Karman nonlinearity
Mahmoud Shariati
2017-1
Numerical creep analysis of FGM rotating disc with GDQ method
Hamid Ekhteraei Toussi
2017-1
Optimum Interaction Between Magnetohydrodynamics and Nanofluid for Thermal and Drag Management
Javad Abolfazli Esfahani
2017-1
Quasi type 2 fuzzy differential equations
Iman Kardan,Alireza Akbarzadeh Tootoonchi
2017-1
Rapid mixing in micromixers using magnetic field
Mohammad Passandideh-Fard
2017-1
Relief of edge effects in bi-adhesive composite joints
Seyed Abdolmajid Yousefsani,Masoud Tahani
2017-1
Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio
Behrooz Hassani
2017-1
sEMG-based impedance control for lower-limb rehabilitation robot
Alireza Akbarzadeh Tootoonchi
2017-1
Slug and bubble flows in a flat sheet ultrafiltration module: Experiments and numerical simulation
Mohammad Passandideh-Fard
2017-1
Taguchi design of three dimensional simulations for optimization of turbulent mixed convection in a cavity
Javad Abolfazli Esfahani
2017-1
The ductility and toughness improvement in metallic glass through the dual effects of graphene interface
Mahmoud Shariati
2017-1
Topological optimization of vibrating continuum structures for optimal natural eigenfrequency
Behrooz Hassani
2017-1
Topology optimization of fundamental compliant mechanisms using a novel asymmetric beam flexure
Hamid Moeenfard
2017-1
Using artificial neural network models and particle swarm optimization for manner prediction of a photovoltaic thermal nanofluid based collector
Mohammad Passandideh-Fard
2017-1
A numerical study on the aerodynamic performance and the self-starting characteristics of a Darrieus wind turbine considering its moment of inertia
Mohammad Moghiman
2017-2
Analytical Bending Analysis of a Circular Sandwich Plate under Distributed Load
Masoud Tahani
2017-2
Approximate analytical solutions to a conservative oscillator using global residue harmonic balance method
Mahmoud Shariati
2017-2
Bending analysis of size- dependent functionally graded annular sector microplates based on the modified couple stress theory
Mahmoud Shariati
2017-2
Comparison of Stiffness and Failure Behavior of the Laminated Grid and Orthogrid Plates
Jalil Rezaee Pazhand
2017-2
DSMC Investigation of Rarefied Gas Flow through Diverging Micro/Nano-channels
Ehsan Roohi
2017-2
Effect of nanoparticles on condensation of humid air in vertical channels
Javad Abolfazli Esfahani
2017-2
Energy consumption pattern modification in greenhouses by a hybrid solar–geothermal heating system
Mahmood Farzaneh-Gord
2017-2
Exact-solution of entropy generation for MHD nanofluid flow induced by a stretching/shrinking sheet with transpiration: Dual solution
Asgar Bradaran Rahimi
2017-2
Experimental investigation of wet flue gas condensation using twisted tape insert
Javad Abolfazli Esfahani
2017-2
Improving Lateral Dynamics of Vehicle Using Direct Yaw Moment Controller Based on Quantitative Feedback Theory
Ali Akbar Akbari
2017-2
Influence of combined impact and cyclic loading on the overall fatigue life of forged steel, EA4T
Amir Malekzadeh,Saeid Hadidi Moud,Khalil Farhangdoost
2017-2
Numerical investigation and sensitivity analysis of effective parameters on combined heat transfer performance in a porous solar cavity receiver by response surface methodology
Mojtaba Mamourian
2017-2
Performance analysis of sloped solar chimney power plants in the southwesternregion of Iran
Mohammad Javad Maghrebi
2017-2
Simultaneous optimization of joint edge geometry and process parameters in gas metal arc welding using integrated ANN-PSO approach
Farhad Kolahan
2017-2
Size-dependent dynamic pull-in analysis of geometric non-linear micro-plates based on the modified couple stress theory
Masoud Tahani
2017-2
Thermally induced gas flows in ratchet channels with diffuse and specular boundaries
Ehsan Roohi
2017-2
A fresh insight into Kane's equations of motion
Seyed Abdolmajid Yousefsani
2017-3
Experimental and numerical investigations on the aerodynamics performance of a pivoted Savonius wind turbine
Ali Reza Teymourtash,Mohsen Kahrom
2017-3
Experimental study of using both ZnO/ water nanofluid and phase change material (PCM) in photovoltaic thermal systems
Mohammad Passandideh-Fard,Mohammad Javad Maghrebi,Mohsen Ghazikhani
2017-3
Forced Convection Heat Transfer of Nanofluids in aChannel Filled with Porous Media Under LocalThermal Non-Equilibrium Condition with Three NewModels for Absorbed Heat Flux
Mohammad Javad Maghrebi
2017-3
General velocity, pressure, and initial condition for two-dimensional and three-dimensional lattice Boltzmann simulations
Hamid Niazmand
2017-3
Implementing the homotopy continuation method in a hybrid approach to solve the kinematics problem of spatial parallel robots
Alireza Akbarzadeh Tootoonchi
2017-3
Numerical investigation and sensitivity analysis of effective parameters to obtain potential maximum power output: A case study on Zanjan prototype solar chimney power plant
Mojtaba Mamourian
2017-3
Output feedback assistive control of single-DOF SEA powered exoskeletons
Iman Kardan,Alireza Akbarzadeh Tootoonchi
2017-3
Reliability and sensitivity of visible liquid penetrant NDT for inspection of welded components
Farhad Kolahan
2017-3
Similarity Solution of Axisymmetric Stagnation-Point Flow and Heat Transfer of a Nanofluid on a Stationary Cylinder with Constant Wall Temperature
Asgar Bradaran Rahimi
2017-3
Three-dimensional thermo-elastic analysis of multi-directional functionally graded rectangular plates on elastic foundation
Mehran Kadkhodayan
2017-3
A 2D numerical study on suppressing liquid sloshing using a submerged cylinder
Mohammad Passandideh-Fard
2017-4
Convective Heat Transfer and Particle Motion in an Obstructed Duct with Two Side by Side Obstacles by Means of DPM Model
Javad Abolfazli Esfahani
2017-4
Influences of corrugation profiles on entropy generation, heat transfer, pressure drop, and performance in a wavy channel
Javad Abolfazli Esfahani
2017-4
Knudsen pump inspired by Crookes radiometer with a specular wall
Ehsan Roohi
2017-4
Nanofluids effects on the evaporation rate in a solar still equipped with a heat exchanger
Ali Kianifar
2017-4
Numerical investigation and optimization of mixed convection in ventilated square cavity filled with nanofluid of different inlet and outlet port
Mojtaba Mamourian
2017-4
Numerical investigation of heat exchanger effectiveness in a double pipe heat exchanger filled with nanofluid: A sensitivity analysis by response surface methodology
Mojtaba Mamourian
2017-4
Numerical modeling and optimization of joint strength in resistance spot welding of galvanized steel sheets
Farhad Kolahan
2017-4
Power density ratio optimization of bimorph piezocomposite energy harvesters using a Multidisciplinary Design Feasible method
Ali Esmaeili
2017-4
The effect of carbon nanotube dispersion on the dynamic characteristics of unidirectional hybrid composites: An experimental approach
Mahmoud Shariati,Jalil Rezaee Pazhand
2017-4
A new species of Ligyra Newman from Roraima, Brazil (Diptera, Bombyliidae, Anthracinae)
Mahmoud Shariati
2017-5
A two-way couple of Eulerian-Lagrangian model for particle transport with different sizes in an obstructed channel
Javad Abolfazli Esfahani
2017-5
An energetic and economic analysis of power productive gas expansion stations for employing combined heat and power
Mahmood Farzaneh-Gord
2017-5
Analytic solution of transversal oscillation of quintic non-linear beam with energy balance method and global residue harmonic balance method
Anoshirvan Farshidianfar
2017-5
Analytical Prediction of Young’s Modulus of Carbon Nanotubes using a Variational Method
Masoud Tahani,Behrooz Hassani
2017-5
Estimation of surface heat flux in a one‑ dimensional hyperbolic bio‑ heat conduction problem with temperature‑ dependent properties during thermal therapy
Mohammad Bagher Ayani
2017-5
Experimental and numerical study of ventilated supercavitation around a cone cavitator
Hossein Ajam
2017-5
Isogeometric analysis of composite beams with arbitrary cross-section using dimensional reduction method
Jalil Rezaee Pazhand
2017-5
Nonlinear transversely vibrating beams by the improved energy balance method and the global residue harmonic balance method
Anoshirvan Farshidianfar
2017-5
Numerical investigation of dimple effects on darrieus vertical axiswind turbine
Mohammad Javad Maghrebi
2017-5
Numerical solution of three-dimensional N-S equations and energy in the case of unsteady stagnation-point flow on a rotating vertical cylinder
Asgar Bradaran Rahimi
2017-5
Three-dimensional thermo-elastic analysis and dynamic response of a multi-directional functionally graded skew plate on elastic foundation
Mehran Kadkhodayan
2017-5
A review on the applications of porous materials in solar energy systems
Javad Abolfazli Esfahani
2017-6
An experimental investigation of casing effect on mechanical properties of billet in ECAP process
Mehran Kadkhodayan,Mahmoud Shariati
2017-6
An intelligent controller for ionic polymer metal composites using optimized fuzzy reinforcement learning
Ali Akbar Akbari
2017-6
Computational investigation of heat transfer and entropy generation rates of Al2O3 nanofluid with Buongiorno's model and using a novel TVD hybrid LB method
Mohammad Hassan Djavareshkian
2017-6
Exergy analysis and entropy generation of a reciprocating compressor applied in CNG stations carried out on the basis models of ideal and real gas
Mahmood Farzaneh-Gord
2017-6
Hydrodynamic simulation of an oscillating hydrofoil near free surface in critical unsteady parameter
Mohammad Hassan Djavareshkian,Ali Esmaeili
2017-6
Influences of wavy wall and nanoparticles on entropy generation over heat exchanger plat
Javad Abolfazli Esfahani
2017-6
Investigating the mechanical properties of layered graphene/polyoxymethylene nanocomposites prepared by the spray method
Mahmoud Shariati
2017-6
Nonlinear dynamic analysis of an elastically restrained cantilever tapered beam
Anoshirvan Farshidianfar
2017-6
Numerical simulation of Cu-water nanofluid magneto-hydro-dynamics and heat transfer cavity containing a circular cylinder of different size and positions
Mohammad Hassan Djavareshkian
2017-6
On the convergence of the simplified Bernoulli trial collision scheme in rarefied Fourier flow
Ehsan Roohi
2017-6
On the ratcheting of defective low-alloy, high-strength steel pipes (API-5L X80) under cyclic bending: An experimental study
Mahmoud Shariati
2017-6
Optimization of a solar air heater with phase change materials: Experimental and numerical study
Ali Kianifar
2017-6
Optimization of effective parameters on solar updraft tower to achieve potential maximum power output: A sensitivity analysis and numerical simulation
Mojtaba Mamourian
2017-6
Optimum design of straight bevel gears pair using evolutionary algorithms
Ali Akbar Akbari
2017-6
Application of reinforcement learning for active noise control
Majid Moavenian
2017-7
Comparison of experimental data, modelling and non-linear regression on transport properties of mineral oil based nanofluids
Javad Abolfazli Esfahani
2017-7
Experimental characterization of droplet dispensing in electrowetting-based microfluidics
Mohammad Passandideh-Fard
2017-7
Experimental investigation of the effects of using metal-oxides/water nanofluids on a photovoltaic thermal system (PVT) from energy and exergy viewpoints
Mohammad Passandideh-Fard
2017-7
On modeling the deformations and tool-workpiece interactions during machining metal matrix composites
Amir Ghandehariun
2017-7
Thermo-fluid performance and entropy generation analysis for a new eccentric helical screw tape insert in a 3D tube
Javad Abolfazli Esfahani
2017-7
Novel Method for Supersonic Inlet Buzz Measurement in Wind Tunnel
Javad Sepahi-Younsi
2017-8
A Novel Hybrid Approach for Numerical Modeling of the Nucleating Flow in Laval Nozzle and Transonic Steam Turbine Blades
Mohammad Reza Mahpeykar
2017-8
Buckling and postbuckling of size-dependent cracked microbeams based on a modified couple stress theory
Mahmoud Shariati
2017-8
Evaluation of the SBT-TAS collision scheme on treating unsteady flows
Ehsan Roohi
2017-8
Exact solution of thermal buckling and post buckling of composite and SMA hybrid composite beam by layerwise theory
Hamid Ekhteraei Toussi
2017-8
Free vibration analysis of dissimilar connected CNTs with atomic imperfections and different locations of connecting region
Mohammad Hossein Abolbashari
2017-8
Improved B-Spline Skinning Approach for Design of Hawt Blade Mold Surfaces
Behnam Moetakef Imani
2017-8
Performance evaluation of floating solarchimney power plant in Iran: estimation of technology progression and cost investigation
Mohammad Javad Maghrebi
2017-8
Regulation of anti-Fourier heat transfer for non-equilibrium gas flows through micro/nanochannels
Ehsan Roohi
2017-8
Unsteady Impulsive Oblique Stagnation-Point Flow Impinging Axisymmetrically on a Vertical Circular Cylinder with Mixed Convection Heat Transfer
Asgar Bradaran Rahimi
2017-8
A lattice Boltzmann method to simulate combined radiation–force convection heat transfer mode
Javad Abolfazli Esfahani
2017-9
A multi-spring model for buckling analysis of cracked Timoshenko nanobeams based on modified couple stress theory
Mahmoud Shariati
2017-9
Adaptive interval type-2 fuzzy logic systems for vehicle handling enhancement by new nonlinear model of variable geometry suspension system
Ali Akbar Akbari
2017-9
Combined Radiation/Natural Convection in a Participating Medium Using Novel Lattice Boltzmann Method
Javad Abolfazli Esfahani
2017-9
Compressive residual stress field in functionally graded material rotating disc under thermo-mechanical loading
Hamid Ekhteraei Toussi
2017-9
Dynamic Nanoparticle Aggregation for a Flowing Colloidal Suspension with Nonuniform Temperature Field Studied by a Coupled LBM and PBE Method
Mohammad Hatami
2017-9
Flutter, limit cycle oscillation, bifurcation and stability regions of an airfoil with discontinuous freeplay nonlinearity
Javad Abolfazli Esfahani
2017-9
Influence of the V acancies on the B uckling B ehavior of a Single – Layered G raphene N anosheet
Mahmoud Shariati,Jalil Rezaee Pazhand
2017-9
Nonlinear analysis of functionally graded piezoelectric energy harvesters
Masoud Tahani,Hamid Moeenfard
2017-9
Optimizing Mechanical Properties of POM/Graphene Nanocomposites Prepared by Spray Method
Mahmoud Shariati
2017-9
Partitioning of solar still for performance recovery: Experimental and numerical investigations with cost analysis
Javad Abolfazli Esfahani
2017-9
Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading
Khalil Farhangdoost
2017-9
Robust output feedback assistive control of a compliantly actuated knee exoskeleton
Iman Kardan,Alireza Akbarzadeh Tootoonchi
2017-9
Thermo-hydraulic analysis for a novel eccentric helical screw tape insert in a three dimensional tube
Javad Abolfazli Esfahani
2017-9
Introduction of Maximum Stress Parameter for the Evaluation of Stress Shielding Around Orthopedic Screws in the Presence of Bone Remodeling Process
Masoud Tahani
2017-10
Analytical Prediction of Stability Lobes for Passively Damped Boring Bars
Behnam Moetakef Imani
2017-10
Applications of magnetohydrodynamics in biological systems-a review on the numerical studies
Javad Abolfazli Esfahani
2017-10
Characterization of PVT systems equipped with nanofluids-based collector from entropy generation
Mohammad Passandideh-Fard
2017-10
Enhancement of propulsive performance of flapping foil by fish-like motion pattern
Javad Abolfazli Esfahani
2017-10
Evaluation of New Collision-Pair Selection Models in DSMC
Ehsan Roohi
2017-10
Flow and Heat Management Around Obstacle by Nanofluid and Incidence Angle
Javad Abolfazli Esfahani
2017-10
Lattice Boltzmann Simulation of Turbulent Natural Convection: Enclosure Heated from Below
Javad Abolfazli Esfahani
2017-10
MHD heat transfer and entropy generation in inclined trapezoidal cavity filled with nanofluid
Mojtaba Mamourian
2017-10
Numerical study of surface radiation and combined natural convection heat transfer in a solar cavity receiver
Mojtaba Mamourian,Asgar Bradaran Rahimi
2017-10
NUMERICAL STUDY OF TURBULENCE KINETIC ENERGY BUDGET IN ACCELERATED CHANNEL FLOW
Mahmoud Pasandidehfard
2017-10
Numerical study on polymer nanofibers with electrically charged jet of viscoelastic fluid in electrospinning process
Mohammad Hatami
2017-10
On modeling tool performance while machining aluminum-based metal matrix composites
Amir Ghandehariun
2017-10
On the Hydrodynamics and Heat Convection of an Impinging External Flow Upon a Cylinder with Transpiration and Embedded in a Porous Medium
Asgar Bradaran Rahimi
2017-10
Parametric studies on elastoplastic buckling of rectangular FGM thin plates
Hamid Ekhteraei Toussi
2017-10
An analytical approach for modeling nonlinear vibration of doubly clamped functionally graded Timoshenko microbeams using strain gradient theory
Hamid Moeenfard
2017-11
An experimental investigation of ignition probability of diesel fuel droplets with metal oxide nanoparticles
Mohammad Moghiman
2017-11
Bed configuration effects on the finned flat-tube adsorption heat exchanger performance: Numerical modeling and experimental validation
Hamid Niazmand
2017-11
Effect of flap installation on improving the homogeneity of the mixture in an induced-charge electrokinetic micro-mixer
Javad Abolfazli Esfahani
2017-11
Heat transfer and sensitivity analysis in a double pipe heat exchanger filled with porous medium
Mojtaba Mamourian
2017-11
Instability of a delaminated composite beam subjected to a concentrated follower force
Jalil Rezaee Pazhand
2017-11
Mixed mode I/II fatigue crack growth under tensile or compressive far-field loading
Khalil Farhangdoost
2017-11
Numerical and Experimental Study on Ratcheting Behavior of Plates with Circular Cutouts under Cyclic Axial Loading
Mahmoud Shariati,Khalil Farhangdoost
2017-11
Numerical Study on Fluid-Structure Interaction in a Patient-Specific Abdominal Aortic Aneurysm for Evaluating Wall Heterogeneity and Material Model Effects on its Rupture
Hamid Niazmand
2017-11
Static mechanical properties and ductility of biomedical ultrafine-grained commercially pure titanium produced by ECAP process
Mehran Kadkhodayan,Mahmoud Shariati
2017-11
The Effects of Different Roughness Configurations on Aerodynamic Performance of Wind Turbine Airfoil and Blade
Mohammad Hassan Djavareshkian
2017-11
The impact of C/H on the radiative and thermal behavior of liquid fuel flames and pollutant emissions
Mohammad Moghiman
2017-11
Tribological Aspects of Wheel–Rail Contact: A Review of Wear Mechanisms and Effective Factors on Rolling Contact Fatigue
Majid Moavenian
2017-11
Appropriate position of porous insert in a heat exchanger by thermo-hydraulic analysis
Javad Abolfazli Esfahani
2017-12
Condensation process and phase-change in the presence of obstacles inside a minichannel
Javad Abolfazli Esfahani
2017-12
Mechanical Characteristics and Failure Mechanism of Nano-Single Crystal Aluminum Based on Molecular Dynamics Simulations: Strain Rate and Temperature Effects
Mahmoud Shariati
2017-12
Novel hybrid lattice Boltzmann technique with TVD characteristics for simulation of heat transfer and entropy generations of MHD and natural convection in a cavity
Mohammad Hassan Djavareshkian
2017-12
Numerical and Experimental Investigation of SS304L Cylindrical Shell with Cutout Under Uniaxial Cyclic Loading
Mahmoud Shariati
2017-12
On the thermally-driven gas flow through divergent micro/nanochannels
Ehsan Roohi
2017-12
Size-dependent piezoelectric energyharvesting analysis of micro/nano bridges subjected to random ambient excitations
Hamid Moeenfard
2017-12
Study of wind-induced vibrations in tall buildings with tuned mass dampers taking into account vortices effects
Anoshirvan Farshidianfar
2017-12
Studying the Effect of Convergence Parameter of CUSP's Scheme in 2D Modelling of Novel Combination of Two Schemes in Nucleating Steam Flow in Cascade Blades
Mohammad Reza Mahpeykar
2017-12
A comparison of axial fatigue strength of coarse and ultrafine grain commercially pure titanium produced by ECAP
Mahmoud Shariati,Mehran Kadkhodayan
2018-1
A new efficient shear deformation theory for FG plates with in-plane and through-thickness stiffness variations using isogeometric approach
Behrooz Hassani
2018-1
A two-phase lattice Boltzmann study on injection filling of cavities with arbitrary shapes
Mohammad Passandideh-Fard
2018-1
Dynamic modeling and CPG-based trajectory generation for a masticatory rehab robot
Alireza Akbarzadeh Tootoonchi
2018-1
Effect of metal oxide nanoparticles on the ignition characteristics of diesel fuel droplets: an experimental study
Mohammad Moghiman
2018-1
Entropy generation analysis of nanofluid flow over a spherical heat source inside a channel with sudden expansion and contraction
Mohammad Passandideh-Fard
2018-1
Estimation of the optimum number and location of nanoparticle injections and the specific loss power for ideal hyperthermia
Mohammad Bagher Ayani
2018-1
Modeling of nucleate boiling heat transfer of a stagnation-point flow impinging on a hot surface
Asgar Bradaran Rahimi
2018-1
Numerical Simulations of Low-Reynolds-Number Flow Past Finite Wings with Leading-Edge Protuberances
Ali Esmaeili
2018-1
On the consequences of successively repeated collisions in no-time-counter collision scheme in DSMC
Ehsan Roohi
2018-1
Optimization and parametric analysis of a nano fluid based photovoltaic thermal system: 3D numerical model with experimental validation
Mohammad Passandideh-Fard
2018-1
Optimization of 3-D natural convection around the isothermal cylinder using Taguchi method
Javad Abolfazli Esfahani
2018-1
Optimizing pulsed Nd:YAG laser beam welding process parameters to attain maximum ultimate tensile strength for thin AISI316L sheet using response surface methodology and simulated annealing algorithm
Farhad Kolahan
2018-1
Real-time velocity scaling and obstacle avoidance for industrial robots using fuzzy dynamic movement primitives and virtual impedances
Iman Kardan,Alireza Akbarzadeh Tootoonchi
2018-1
Recent developments in magneto-hydrodynamic Fe3O4 nanofluids for different molecular applications: A review study
Mohammad Hatami
2018-1
Reliability and sensitivity of magnetic particle nondestructive testing in detecting the surface cracks of welded components
Farhad Kolahan
2018-1
Statistically optimized FOPID for output force control of SEAs
Alireza Akbarzadeh Tootoonchi,Iman Kardan
2018-1
The Assessment of Elastic Follow-Up Effects on Cyclic Accumulation of Inelastic Strain Under Displacement-Control Loading
Mahmoud Shariati,Saeid Hadidi Moud
2018-1
Three-dimensional analysis of condensation nanofluid film on an inclined rotating disk by efficient analytical methods
Mohammad Hatami
2018-1
Three-dimensional and two-phase nanofluid flow and heat transfer analysis over a stretching infinite solar plate
Mohammad Hatami
2018-1
Two-dimensional cross-sectional analysis of composite beams Rayleigh-Ritz-based dimensional reduction method
Jalil Rezaee Pazhand
2018-1
Using an optimized RBF neural network to predict the out-ofplane welding distortions based on the 3-2-1 locating scheme
Farhad Kolahan
2018-1
A generalized form of the Bernoulli Trial collision scheme in DSMC: Derivation and evaluation
Ehsan Roohi
2018-2
Adsorption cooling systems for heavy trucks A/C applications driven by exhaust and coolant waste heats
Hamid Niazmand
2018-2
An ocean wave-based piezoelectric energy harvesting system using breaking wave force
Anoshirvan Farshidianfar,Aref Afsharfard
2018-2
Cavitation characteristics around a sphere: An LES investigation
Ehsan Roohi
2018-2
Energy and exergy analysis of nano fluid based photovoltaic thermal system integrated with phase change material
Mohammad Passandideh-Fard
2018-2
Experimental analysis of energy absorption capability of thin-walled composite cylindrical shells by quasi-static axial crushing test
Mahmoud Shariati
2018-2
Experimental investigation of urea injection parameters influence on NOx emissions from blended biodiesel-fueled diesel engines
Mohammad Moghiman
2018-2
Influence of repetitive laser pulse energy depositions on supersonic flow over a sphere, cone and oblate spheroid
Ali Kianifar
2018-2
Investigating the entropy generation in condensing steam flow in turbine blades with volumetric heating
Mohammad Reza Mahpeykar
2018-2
Non-linear influence of hydrostatic pressure on the yielding of asymmetric anisotropic sheet metals
Mehran Kadkhodayan
2018-2
Surface fairness: a quality metric for aesthetic assessment of compliant automotive bodies
Behnam Moetakef Imani
2018-2
A new quality appearance evaluation technique for automotive bodies including effect of flexible parts tolerances
Behnam Moetakef Imani
2018-3
A novel method for quantifying damage to cast-in-place selfcentering concrete stepping walls
Behrooz Hassani
2018-3
Analytical investigation of simultaneous effects of convergent section heating of Laval nozzle, steam inlet condition, and nozzle geometry on condensation shock
Mohammad Reza Mahpeykar
2018-3
Application of a fictitious domain method in numerical simulation of an oscillating wave surge converter
Mohammad Passandideh-Fard
2018-3
Effect of volumetric radiation on natural convection in a cavity with a horizontal fin using lattice Boltzmann method
Javad Abolfazli Esfahani
2018-3
Experimental study of direct contact condensation of steam jet in water flow in a vertical pipe with square cross section
Mohammad Passandideh-Fard
2018-3
Porous materials in building energy technologies-A review of the applications, modelling and experiments
Javad Abolfazli Esfahani
2018-3
Simulation of liquid reaction and droplet formation on a moving micro-object by lattice Boltzmann method
Javad Abolfazli Esfahani
2018-3
Study of Stone-wales Defect on Elastic Properties of Single-layer Graphene Sheets by an Atomistic based Finite Element Model
Masoud Tahani
2018-3
مدل سازی ارتعاشات آزاد غیرخطی برج توربین باد
Hamid Moeenfard
2018-3
(Response of natural gas distribution pipeline networks to ambient temperature variation (unsteady simulation
Mahmood Farzaneh-Gord
2018-4
A review on the application, simulation, and experiment of the electrokinetic mixers
Javad Abolfazli Esfahani
2018-4
Analytical modeling of nonlinear flexural-extensional vibration of flexure beams with an interconnected compliant element
Hamid Moeenfard
2018-4
Effect of speed and load on exergetic parameters of a diesel engine fueled with diesel and biodiesel blends
Hossein Ajam
2018-4
Enhanced efficiency in Concentrated Parabolic Solar Collector (CPSC) with a porous absorber tube filled with metal nanoparticle suspension
Mohammad Hatami
2018-4
Investigation of the Effect of Geometric Parameters on EWOD Actuation in Rectangular Microchannels
Mohammad Passandideh-Fard
2018-4
Isogeometric analysis of free-form Timoshenko curved beams including the nonlinear effects of large deformations
Behnam Moetakef Imani
2018-4
Micromechanics of brain white matter tissue: A fiber-reinforced hyperelastic model using embedded element technique
Seyed Abdolmajid Yousefsani
2018-4
Numerical fatigue analysis of premolars restoredby CAD/CAM ceramic crowns
Khalil Farhangdoost
2018-4
On the vortical characteristics and cold-to-hot transfer of rarefied flow in a lid-driven isosceles orthogonal triangular cavity with isothermal walls
Ehsan Roohi
2018-4
Steps optimization and productivity enhancement in a nanofluid cascade solar still
Javad Abolfazli Esfahani
2018-4
Uniform Magnetic field (UMF) Effect on the Heat Transfer of a Porous Half-Annulus Enclosure Filled by Cu-Water Nanofluid Considering Heat Generation
Mohammad Hatami
2018-4
Variable magnetic field (VMF) effect on the heat transfer of a half-annulus cavity filled by Fe3O4-water nanofluid under constant heat flux
Mohammad Hatami
2018-4
An investigation into the flexural and drawing behaviors of GFRP-based fiber–metal laminate
Mehran Kadkhodayan
2018-5
Analytical modeling of a 3-D snake robot based on sidewinding
Alireza Akbarzadeh Tootoonchi
2018-5
Dynamic analysis of a shape memory alloy beam with pseudoelastic behavior
Ali Reza Fathi
2018-5
Effects of nano-additives on pollutants emission and engine performance in a urea-SCR equipped diesel engine fueled with blended-biodiesel
Mohammad Moghiman
2018-5
Evaluation of Tension, Bending and Twisting Rigidities of Single-Layer Graphene Sheets by an Analytical Asymptotic Homogenization Model
Masoud Tahani
2018-5
Experimental study on the effect of Zirconia nanoparticles on solidification heat transfer characteristics: A comparison with Titania nanoparticles
Mohammad Moghiman
2018-5
Fe3O4–(CH2OH)2 nanofluid analysis in a porous medium under MHD radiative boundary layer and dusty fluid
Mohammad Hatami
2018-5
Flutter of multi-cracked laminated composite beams subjected to a non-conservative compressive load
Jalil Rezaee Pazhand
2018-5
Microstructural analysis and fatigue fracture behavior of rail steel
Khalil Farhangdoost,Mahmoud Shariati
2018-5
Optimizing flow properties of the different nanofluids inside a circular tube by using entropy generation minimization approach
Mahmood Farzaneh-Gord
2018-5
Ratcheting assessment of notched steel samples subjected to asymmetric loading cycles through coupled kinematic hardening-Neuber rule
Khalil Farhangdoost,Mahmoud Shariati
2018-5
Reply to comments on “Optimization and parametric analysis of a nanofluid based photovoltaic thermal system: 3D numerical model with experimental validation”, energy conversion and management (2018); 160: 93–108, by M. Hosseinzadeh, A. Salari, M. Sardarabadi, M. Passandideh-Fard
Mohammad Passandideh-Fard
2018-5
Second law of thermodynamics analysis for nanofluid turbulent flow around a rotating cylinder
Javad Abolfazli Esfahani
2018-5
Spatial entropy generation analysis for the design improvement of a single slope solar still
Javad Abolfazli Esfahani
2018-5
Surface hardness improvement in surface grinding process using combined Taguchi method and regression analysis
Ali Akbar Akbari
2018-5
Thermodynamic Analysis of Single Reservoir Filling Process of Hydrogen Vehicle
Mahmood Farzaneh-Gord
2018-5
Time dependent creep analysis in thick FGM rotating disk with two-dimensional pattern of heterogeneity
Hamid Ekhteraei Toussi
2018-5
Two New Non-AFR Criteria for Depicting Strength Differential Effect (SDE) in Anisotropic Sheet Metals
Mehran Kadkhodayan
2018-5
A comparative study on the performance of artificial neural networks and regression models in modeling the heat source model parameters in GTA welding
Farhad Kolahan
2018-6
A concise review on the role of nanoparticles upon the productivity of solar desalination systems
Javad Abolfazli Esfahani
2018-6
A review of solar absorption cooling systems combined with various auxiliary energy devices
Ali Kianifar
2018-6
Different shapes of Fe3O4 nanoparticles on the free convection and entropy generation in a wavy-wall square cavity filled by power-law non-Newtonian nanofluid
Mohammad Hatami
2018-6
Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites
Jalil Rezaee Pazhand,Mahmoud Shariati
2018-6
Free vibration analysis of a shape memory alloy beam with pseudoelastic behavior
Ali Reza Fathi
2018-6
Numerical investigation of aerodynamic effects of opposite wrap-around fins at supersonic speeds
Mahmoud Pasandidehfard
2018-6
Numerical investigation on Al2O3/water nanofluid flow through twistedserpentine tube with empirical validation
Asgar Bradaran Rahimi
2018-6
The effect of friction stir welding parameters on the microstructure, defects, and mechanical properties of AA7075-T651 joints
Farhad Kolahan
2018-6
The numerical study of the effect of design parameters on EWOD actuation inmicrochannels of rectangular cross section
Mohammad Passandideh-Fard
2018-6
Using artificial neural network and quadratic algorithm for minimizing entropy generation of Al2O-EG/W nanofluid flow inside parabolic trough solar collector
Mahmood Farzaneh-Gord
2018-6
A double MRT-LBM for simulation of mixing in an active micromixer with rotationally oscillating stirrer in high Peclet number flows
Hamid Niazmand
2018-7
A numerical investigation of preheated diluted oxidizer influence on NOx emission of biogas flameless combustion using Taguchi approach
Mohammad Moghiman
2018-7
Effect of glass cover and working fluid on the performance of photovoltaic thermal (PVT) system: An experimental study
Mohammad Passandideh-Fard
2018-7
Effect of interfacial debonding on stress transfer in graphene reinforced polymer nanocomposites
Mahmoud Shariati
2018-7
Effects of rib shapes on entropy generation of turbulent flow in duct
Javad Abolfazli Esfahani
2018-7
Evaluating the Modulated Gradient Model in Large-Eddy Simulation of Channel Flow with OpenFOAM
Ehsan Roohi
2018-7
Experimental study of using both ethylene glycol and phase change material as coolant in photovoltaic thermal systems (PVT) from energy, exergy and entropy generation viewpoints
Mohammad Passandideh-Fard
2018-7
High-performance controller design and evaluation for active vibration control in boring
Behnam Moetakef Imani
2018-7
Local ratcheting behavior in notched 1045 steel plates
Khalil Farhangdoost,Mahmoud Shariati
2018-7
Localized solar heating via graphene oxide nanofluid for direct steam generation
Hamid Niazmand
2018-7
Nonlinear behavior of single bolted flange joints: A novel analytical model
Majid Moavenian,Aref Afsharfard
2018-7
Novel piezoelectric-based ocean wave energy harvesting from offshore buoys
Anoshirvan Farshidianfar,Aref Afsharfard
2018-7
Optimisation of drilling parameters on St37 based on Taguchi method
Ali Akbar Akbari
2018-7
Size-dependent nonlinear vibration analysis of shear deformable microarches using strain gradient theory
Hamid Moeenfard
2018-7
Temporal exergy analysis of adsorption cooling system by developing non-flow exergy function
Mohsen Ghazikhani,Hamid Niazmand
2018-7
Thermal management of a distribution transformer: An optimization study of the cooling system using CFD and response surface methodology
Hamid Niazmand
2018-7
Thermo–Economical Evaluation of Producing Liquefied Natural Gas and Natural Gas Liquids from Flare Gases
Mahmood Farzaneh-Gord
2018-7
Analytical solution for coupled non-Fickian diffusion-thermoelasticity and thermoelastic wave propagation analysis
Mohammad Hossein Abolbashari
2018-8
Boundary layer suction for high-speed air intakes: A review
Javad Sepahi-Younsi
2018-8
General curved boundary treatment for two- and three-dimensional stationary and moving walls in flow and nonflow lattice Boltzmann simulations
Hamid Niazmand
2018-8
High-Temperature Oxidation Behavior of Nano-structured CoNiCrAlY–YSZ Coatings Produced by HVOF Thermal Spray Technique
Mohammad Hatami
2018-8
Influence of Joints Flexibility on Overall Stiffness of a 3–PRUP compliant Parallel Manipulator
Alireza Akbarzadeh Tootoonchi
2018-8
Investigation for squeezing flow of ethylene glycol (C2H6O2) carbon nanotubes (CNTs) in rotating stretching channel with nonlinear thermal radiation
Mohammad Hatami
2018-8
Modeling and experimental study of a hand tremor suppression system
Aref Afsharfard
2018-8
Nanofluid Condensation and MHD Flow Modeling over Rotating Plates Using Least Square Method (LSM)
Mohammad Hatami
2018-8
Non-Newtonian blood flow and coupled blood-wall oxygen mass transport in a 180° curved artery
Hamid Niazmand
2018-8
Numerical Solution of N-S Equations in the case of Unsteady Axisymmetric Stagnation-point Flow on a Vertical Circular Cylinder with Mixed Convection Heat Transfer
Asgar Bradaran Rahimi
2018-8
Simulating phase change during the droplet deformation and impact on a wet surface in a square microchannel: An application of oil drops collision
Javad Abolfazli Esfahani
2018-8
Thermal and mechanical buckling analysis of FG carbon nanotube reinforced composite plates using modified couple stress theory and isogeometric approach
Behrooz Hassani
2018-8
A Study on Kinematics and Workspace Determination of a General 6-PUS Robot
Alireza Akbarzadeh Tootoonchi
2018-9
Ballistic and Collisional Flow Contributions to Anti-Fourier Heat Transfer in Rarefied Cavity Flow
Ehsan Roohi
2018-9
Cross-sectional heat transfer of hot tubes in a wavy porous channel filled by Fe3O4-water nanofluid under a variable magnetic field
Mohammad Hatami
2018-9
Economic and environmental analysis of using metal-oxides/water nanofluid in photovoltaic thermal systems (PVTs)
Mohammad Passandideh-Fard
2018-9
Effects of van der Waals forces on hygro-thermal vibration and stability of fluid-conveying curved double-walled carbon nanotubes subjected to external magnetic field
Mahmoud Shariati
2018-9
Energy and exergy analysis of reciprocating natural gas expansion engine based on valve configurations
Mahmood Farzaneh-Gord
2018-9
Optimal Idle Speed Control of a Natural Aspirated Gasoline Engine Using Bio-inspired Meta-heuristic Algorithms
Ali Reza Fathi
2018-9
Ratcheting progress at notch root of 1045 steel samples over asymmetric loading cycles: Experiments and analyses
Mahmoud Shariati,Khalil Farhangdoost
2018-9
Sensitivity of natural gas flow measurement to AGA8 or GERG2008 equation of state utilization
Mahmood Farzaneh-Gord
2018-9
Using Fuzzy FMEA approach to improve decision-making process in CNC machine Electrical and control equipment failure prediction
Farhad Kolahan
2018-9
2D lattice Boltzmann investigation of saturated pool boiling using a tunable surface tension model: Prandtl number effects on film boiling
Javad Abolfazli Esfahani
2018-10
Theoretical study of nanofluids behavior at critical Rayleigh numbers
Javad Abolfazli Esfahani
2018-10
An applied method for fatigue life assessment of engineering components using rigid-insert crack closure model
Mahmoud Shariati
2018-10
Application of AG method and its improvement to nonlinear damped oscillators
Mahmoud Shariati
2018-10
CFD analysis of natural gas emission from damaged pipelines: Correlation development for leakage estimation
Mahmood Farzaneh-Gord
2018-10
Edge Effects in Adhesively Bonded Composite Joints Iintegrated with Piezoelectric Patches
Seyed Abdolmajid Yousefsani,Masoud Tahani
2018-10
Energy and drying time optimization of convective drying for performance improvement: RSM and LBM methods
Javad Abolfazli Esfahani
2018-10
MHD boundary layer analysis for micropolar dusty fluid containing Hybrid nanoparticles (Cu‑Al2O3) over a porous medium
Mohammad Hatami
2018-10
The role of wing bending deflection in the aerodynamics of flapping micro aerial vehicles in hovering flight
Mohammad Hassan Djavareshkian
2018-10
Transient Analysis of the Interactions Between a Heat Transferring, Radial Stagnation Flow, and a Rotating Cylinder-Magnetohydrodynamic and Nonuniform Transpiration Effects
Asgar Bradaran Rahimi
2018-10
Volume-of-Fluid Model for Simulating Vapor–Liquid Phase Change in a Solar Still
Javad Abolfazli Esfahani
2018-10
Potential of gear-ring turbulator in three-dimensional heat exchanger tube from second law of thermodynamic viewpoint
Javad Abolfazli Esfahani
2018-11
Analytical investigation of peristaltic nanofluid flow and heat transfer in an asymmetric wavy wall channel (Part I: Straight channel)
Mohammad Hatami
2018-11
Analytical investigation of peristaltic nanofluid flow and heat transfer in an asymmetric wavy wall channel (Part II: Divergent channel)
Mohammad Hatami
2018-11
Cu-water nanofluid flow and heat transfer in a heat exchanger tube equipped with cross-cut twisted tape
Javad Abolfazli Esfahani
2018-11
Experimental and analytical investigation on sound transmission loss of cylindrical shells with absorbing material
Anoshirvan Farshidianfar
2018-11
Experimental investigation on thermal performance and economic analysis of cosine wave tube structure in a shell and tube heat exchanger
Mojtaba Mamourian
2018-11
Heat transfer and entropy generation of the nanofluid flow inside sinusoidal wavy channels
Mahmood Farzaneh-Gord
2018-11
Improvement of Airfoils Aerodynamic Efficiency by Thermal Camber Phenomenon at Low Reynolds Numbers
Mohammad Hassan Djavareshkian
2018-11
Indirect adaptive robust mixed H2/H∞general type-2 fuzzy control ofuncertain nonlinear systems
Alireza Akbarzadeh Tootoonchi
2018-11
Investigation of Pre-buckling Stress Effect on Buckling Load Determination of Finite Rectangular Plates with Circular Cutout
Mahmoud Shariati
2018-11
Mass transfer estimation during friction stir welding of aluminum alloy using smoothed particle hydrodynamics method
Farhad Kolahan
2018-11
Measurement of methane emission into environment during natural gas purging process
Mahmood Farzaneh-Gord
2018-11
NONLINEAR DYNAMIC ANALYSIS OF AN AXIALLY MOVING POROUS FG PLATE SUBJECTED TO A LOCAL FORCE WITH KINETIC DYNAMIC RELAXATION METHOD
Mehran Kadkhodayan
2018-11
Precise calculation of natural gas sound speed using neural networks: An application in flow meter calibration
Mahmood Farzaneh-Gord
2018-11
Rarefied transitional flow through diverging nano- and microchannels: A TRT lattice Boltzmann study
Ehsan Roohi
2018-11
Taguchi optimization of combined radiation/natural convection of participating medium in a cavity with a horizontal fin using LBM
Javad Abolfazli Esfahani
2018-11
The Effects of Target Plate Roughness on the Parameters of Circular Hydraulic Jumps: An Experimental Investigation
Ali Reza Teymourtash,Mohammad Reza Mahpeykar
2018-11
Thermo-economic analysis of diesel engine fueled with blended levels of waste cooking oil biodiesel in diesel fuel
Hossein Ajam
2018-11
Using Design of Experiments Approach and Simulated Annealing Algorithm for Modeling and Optimization of EDM Process Parameters
Farhad Kolahan
2018-11
A homogeneous payload specific performance index for robot manipulators based on the kinetic energy
Alireza Akbarzadeh Tootoonchi,Iman Kardan
2018-12
A novel fault diagnosis technique based on model and computational intelligence applied to vehicle active suspension systems
Majid Moavenian
2018-12
A three-dimensional micromechanical model of brain white matter with histology-informed probabilistic distribution of axonal fibers
Seyed Abdolmajid Yousefsani
2018-12
Analytical Approximation Of MHD Nano-fluid Flow Induced By A Stretching Permeable Surface Using Buongiorno’s Model
Hossein Ajam
2018-12
Compliance error modeling for manipulators considering the effects of the component weights and the body and joint flexibilities
Alireza Akbarzadeh Tootoonchi
2018-12
Dynamic Analysis of Rectangular Micro-plates Under Mechanical Shock in Presence of Electrostatic Actuation
Masoud Tahani
2018-12
Dynamic stability enhancement of laminated composite sandwich plates using smart elastomer layer
Jalil Rezaee Pazhand
2018-12
Enhancing the convergence speed of numerical solution using the flow rate control in a novel lattice Boltzmann method
Javad Abolfazli Esfahani
2018-12
Experimental investigation of flapping mechanism of the black-headed gull in forward flight
Mohammad Hassan Djavareshkian
2018-12
Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate
Khalil Farhangdoost
2018-12
Improving heat transfer in triplex tube heat exchanger containing phase-change materials by modifications of length and position of fins
Asgar Bradaran Rahimi
2018-12
Pre-bent shape design of full free-form curved beams using isogeometric method and semi-analytical sensitivity analysis
Behnam Moetakef Imani,Behrooz Hassani
2018-12
Random vibration analysis of multi-floor buildings using a distributed parameter model
Hamid Moeenfard
2018-12
Two-Phase Nanofluid Thermal Analysis over a Stretching Infinite Solar Plate Using Keller Box Method (KBM)
Mohammad Hatami
2018-12
A nonlinear study on structural damping of SMA hybrid composite beam
Hamid Ekhteraei Toussi
2019-1
An Optimal Defect-free Synthesis of Four-bar Mechanisms by Using Constrained APT-FPSO Algorithm
Ali Reza Fathi
2019-1
Analytical layerwise solution of nonlinear thermal instability of SMA hybrid composite beam under nonuniform temperature condition
Hamid Ekhteraei Toussi
2019-1
Applicability of connectionist methods to predict dynamic viscosity of silver/water nanofluid by using ANN-MLP, MARS and MPR algorithms
Mahmood Farzaneh-Gord
2019-1
Axial vibration of hetero-junction CNTs mass nanosensors by considering the effects of small scale and connecting region: An analytical solution
Mohammad Hossein Abolbashari
2019-1
Combined heat and power economic dispatch problem using advanced modified particle swarm optimization
Mohammad Hatami
2019-1
Energy and drying time optimization of a coupled heat and mass transfer during convective drying: Taguchi and LBM methods
Javad Abolfazli Esfahani
2019-1
Entropy generation analysis for nanofluid flow inside a duct equipped with porous baffles
Javad Abolfazli Esfahani
2019-1
Estimating Heat Release due to Phase Change of High-Pressure Condensing Steam Using Buckingham Pi Theorem
Mohammad Reza Mahpeykar
2019-1
Experimental Hysteresis Identification and Micro-position Control of a Shape-Memory-Alloy Rod Actuator
Ali Reza Fathi
2019-1
Experimental investigation and prediction of the thermal conductivity of water-based oxide nanofluids with low volume fractions
Mohammad Hatami
2019-1
Experimental investigation of multiwall carbon nanotube/paraffin based heat sink for electronic device thermal management
Mohammad Passandideh-Fard
2019-1
INVESTIGATION OF FLEXIBILITY CONSTANTS FOR A MULTI-SPRING MODEL: A SOLUTION FOR BUCKLING OF CRACKED MICRO/NANOBEAMS
Mahmoud Shariati
2019-1
Lateral vibrations of embedded hetero-junction carbon nanotubes based on the nonlocal strain gradient theory: Analytical and differential quadrature element (DQE) methods
Mohammad Hossein Abolbashari
2019-1
Numerical simulation of pressure pulsation effects of a snubber in a CNG station for increasing measurement accuracy
Mahmood Farzaneh-Gord
2019-1
Optimization of convective drying by response surface methodology
Javad Abolfazli Esfahani
2019-1
Second law of thermodynamics analysis for nanofluid turbulent flow inside a solar heater with the ribbed absorber plate
Javad Abolfazli Esfahani
2019-1
Stability and magnetization of Fe3O4/water nanofluid preparation characteristics using Taguchi method
Mohammad Passandideh-Fard,Mohammad Javad Maghrebi
2019-1
Workspace Boundary Avoidance in Robot Teaching by Demonstration Using Fuzzy Impedance Control
Alireza Akbarzadeh Tootoonchi
2019-1
A 3-D numerical simulation of non-Newtonian blood flow through femoral artery bifurcation with a moderate arteriosclerosis investigating Newtonian/non-Newtonian flow and its effects on elastic vessel walls
Javad Abolfazli Esfahani
2019-2
A lattice Boltzmann study on dripping process during 2D droplet impact onto a wetted rotating cylinder
Javad Abolfazli Esfahani
2019-2
Optimization and Sensitivity Analysis of a Heat Exchanger Tube Fitted with Cross-cut Twisted Tape with Alternate Axis
Javad Abolfazli Esfahani
2019-2
Aerodynamic Analysis of a Three-Bladed Pivoted Savonius Wind Turbine: Wind Tunnel Testing and Numerical Simulation
Mohsen Kahrom,Ali Reza Teymourtash
2019-2
Anisotropic Minimum-Dissipation (AMD) Subgrid-Scale Model Implemented in OpenFOAM: Verification and Assessment in Single-phase and Multi-phase Flows
Ehsan Roohi
2019-2
Brownian motion effect on heat transfer of a three-dimensional nanofluid flow over
Asgar Bradaran Rahimi
2019-2
Effects of radiation on mixed convection stagnation-point flow of MHD third-grade nanofluid
Asgar Bradaran Rahimi
2019-2
Elastic wave propagation in non-uniform rational B-spline rods under mechanical impact loading using an isogeometrical approach
Mohammad Hossein Abolbashari
2019-2
Experimental investigation on heat transfer enhancement for a ferrofluid in a helically coiled pipe under constant magnetic field
Mohammad Passandideh-Fard
2019-2
Improving application of galloping-based energy harvesters in realistic condition
Aref Afsharfard
2019-2
Isogeometric analysis of shear refined delaminated composite beams using
Jalil Rezaee Pazhand
2019-2
Layered manufacturing of a three-dimensional polymethyl methacrylate (PMMA) scaffold used for bone regeneration
Ali Reza Fathi
2019-2
Layerwise/FSDT comparative studies on nonlinear transient response of SMA hybrid composite beam
Hamid Ekhteraei Toussi
2019-2
Numerical study of the stand-off distance and liner thickness effect on the penetration depth efficiency of shaped charge process
Ali Reza Fathi
2019-2
Optimal Design of a Stable Fuzzy Controller for Beyond Pull-In Stabilization of Electrostatically Actuated Circular Microplates
Hamid Moeenfard
2019-2
Radiometric flow in periodically patterned channels: fluid physics and improved configurations
Ehsan Roohi
2019-2
Recent advances in modeling and simulation of nanofluid flows-part II: Applications
Hamid Niazmand
2019-2
Recent advances in modeling and simulation of nanofluid flows—Part I: Fundamentals and theory
Hamid Niazmand
2019-2
Self-Similar Solution of Radial Stagnation Point Flow and Heat Transfer of a Viscous, Compressible Fluid Impinging on a Rotating Cylinder
Asgar Bradaran Rahimi
2019-2
Simulation of conjugate radiation–forced convection heat transfer in a porous medium using the lattice Boltzmann method
Javad Abolfazli Esfahani
2019-2
Study of sound transmission through single- and double-walled plates with absorbing material: Experimental and analytical investigation
Anoshirvan Farshidianfar
2019-2
Trajectory modication of a transonic spherical projectile under hop-up mechanism
Ali Reza Teymourtash,Mojtaba Mamourian
2019-2
Collapse of honeycomb cell as a result of buckling or plastic hinges, analytical, numerical and experimental study
Mehran Kadkhodayan
2019-3
Determination of rigidities, stiffness coefficients and elastic constants of multi-layer graphene sheets by an asymptotic homogenization method
Masoud Tahani
2019-3
Experimental measurement of radius of circular hydraulic jumps: Effect of radius of convex target plate
Mohammad Reza Mahpeykar,Ali Reza Teymourtash
2019-3
Feasibility study of waste vegetable oil as an alternative cooling medium in transformers
Hamid Niazmand
2019-3
Influences of mechanical activation and heating rate on reaction processes in combustion synthesis of NiAl-Al2O3 composites
Ali Kianifar
2019-3
Investigating the effect of engine speed and flight altitude on the performance of throttle body injection (TBI) system of a two-stroke air-powered engine
Mahmood Farzaneh-Gord
2019-3
Investigation and comparison of performance of some air gun projectiles with nose shape modifications
Ali Reza Teymourtash,Mojtaba Mamourian
2019-3
Mixed Convective Flow of Electrically Conducting Fluid in a Vertical Cylindrical Annulus with Moving Walls Adjacent to a Radial Magnetic Field along with Transpiration
Asgar Bradaran Rahimi
2019-3
Numerical heat transfer enhancement using different nanofluids flow through venturi and wavy tubes
Mohammad Hatami
2019-3
Planned production of thermal units for reducing the emissions and costs using the improved NSGA II method
Mohammad Hatami
2019-3
Prediction of fatigue crack propagation and fractography of rail steel
Mahmoud Shariati,Khalil Farhangdoost
2019-3
Size-dependent analysis of FG microplates with temperature-dependent material properties using modified strain gradient theory and isogeometric approach
Behrooz Hassani
2019-3
Supersonic inlet buzz detection using pressure measurement on wind tunnel wall
Javad Sepahi-Younsi
2019-3
Taguchi optimization for natural convection heat transfer of Al2O3 nanofluid in a partially heated cavity using LBM
Hossein Ajam
2019-3
Toward a bio-inspired rehabilitation aid: sEMG-CPG approach for online generation of jaw trajectories for a chewing robot
Alireza Akbarzadeh Tootoonchi
2019-3
Using combined artificial neural network and particle swarm optimization algorithm for modeling and optimization of electrical discharge machining process
Farhad Kolahan
2019-3
مدلسازی میرایی در میکرومحرک های پیچشی دو محوره با درنظر گرفتن خمش تیرهای نگهدارنده
Hamid Moeenfard
2019-3
An Alternative High-Density Ratio Pseudo-potential Lattice Boltzmann Model with Surface Tension Adjustment Capability
Hamid Niazmand,Mohammad Passandideh-Fard
2019-4
Delamination analysis in composite root of a carbon-layer rein-forced wind turbine blade
Hamid Ekhteraei Toussi
2019-4
Double stiffness vibration suppressor and energy harvester: An experimental study
Aref Afsharfard
2019-4
Novel modeling of circular piezoelectric devices as vibration suppresser and energy harvester†
Aref Afsharfard
2019-4
Numerical investigation and simultaneous optimization of geometry and zeta-potential in electroosmotic mixing flows
Hamid Niazmand
2019-4
Size‑Dependent Pull‑In Instability Analysis of Electrically Actuated Packaged FG Micro‑Cantilevers under the Effect of Mechanical Shock
Masoud Tahani
2019-4
An experimental study on the energy absorption characteristics of single- and bi-layer cups under quasi-static loading
Mehran Kadkhodayan
2019-5
Buckling analysis of orthotropic smart laminated nanoplates based on the nonlocal continuum mechanics using third-order shear and normal deformation theory
Abdolrahman Jaamialahmadi
2019-5
Experimental and numerical study of elasto-inertial focusing in straight channels
Hamid Niazmand
2019-5
Experimental investigation of a novel type of two-phase closed thermosyphon filled with functionalized carbon nanotubes/water nanofluids for electronic cooling application
Mohammad Passandideh-Fard
2019-5
Experimental study on thermal analysis of a novel shell and tube heat exchanger with corrugated tubes
Mojtaba Mamourian,Javad Abolfazli Esfahani
2019-5
Heat transfer enhancement in solidification process by change of fins arrangements in a heat exchanger containing phase-change materials
Asgar Bradaran Rahimi
2019-5
Heat transfer in an eight-pass oscillating loop heat pipe equipped with cooling tower
Javad Abolfazli Esfahani
2019-5
Influence of Surfactant on Supercooling Degree of Aqueous Titania Nanofluids in Energy Storage Systems
Mohammad Moghiman
2019-5
Two-dimensional analytical investigation of conjugate heat transfer in a finite-length planar micro-combustor for a hydrogen-air mixture
Javad Abolfazli Esfahani
2019-5
Vibration attenuation of rotor-bearing systems using smart electro-rheological elastomer supports
Hamid Moeenfard,Jalil Rezaee Pazhand
2019-5
A dusty gas model-direct simulation Monte Carlo algorithm to simulate flow in micro-porous media
Ehsan Roohi,Ali Reza Teymourtash
2019-6
An adaptive modified fuzzy-sliding mode longitudinal control design and simulation for vehicles equipped with ABS system
Majid Moavenian
2019-6
An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen
Javad Abolfazli Esfahani
2019-6
Attenuation of radiative heat transfer in natural convection from a heated plate by scattering properties of Al2O3 nanofluid: LBM simulation
Javad Abolfazli Esfahani
2019-6
Effect of the angle of oblique stagnation-point flow impinging axisymmetrically on a vertical circular cylinder with mixed convection heat transfer
Asgar Bradaran Rahimi
2019-6
Investigation of slip effects on electroosmotic mixing in heterogeneous microchannels based on entropy index
Hamid Niazmand
2019-6
Lattice Boltzmann simulation of combined volumetric radiation/natural convection to consider optical properties of nanoparticles
Javad Abolfazli Esfahani
2019-6
Numerical investigation of different geometrical parameters of perforated conical rings on flow structure and heat transfer in heat exchangers
Javad Abolfazli Esfahani
2019-6
Surface roughness effect on droplet impact characterization: Experimental and theoretical study
Mohammad Passandideh-Fard
2019-6
Wavelet analysis and frequency spectrum of cloud cavitation around a sphere
Ehsan Roohi
2019-6
A numerical investigation of magnetic field effect on blood flow as biomagnetic fluid in a bend vessel
Javad Abolfazli Esfahani
2019-7
A numerical investigation of magnetic mixing in electroosmotic flows
Hamid Niazmand
2019-7
Fatigue and fracture behavior of A516 steel used in thick-walled pressure vessels
Mahmoud Shariati
2019-7
Improving steam generation and distilled water production by volumetric solar heating
Hamid Niazmand
2019-7
Numerical investigation of turbulent Cu-water nanofluid in heat exchanger tube equipped with perforated conical rings
Javad Abolfazli Esfahani
2019-7
Numerical study of the effects of nanofluids and phase-change materials in photovoltaic thermal (PVT) systems
Mohammad Passandideh-Fard
2019-7
Performance enhancement of heat exchangers using eccentric tape inserts and nanofluids
Javad Abolfazli Esfahani
2019-7
Rolling contact fatigue analysis of rails under the in uence of residual stresses induced by manufacturing
Mahmoud Shariati,Khalil Farhangdoost
2019-7
Simulation of rarefied gas flow in a microchannel with backward facing step by two relaxation times using Lattice Boltzmann method – Slip and transient flow regimes
Mohammad Bagher Ayani,Javad Abolfazli Esfahani
2019-7
Targeting a channel coating by using magnetic field and magnetic nanofluids
Javad Abolfazli Esfahani
2019-7
Active tuning and maximization of natural frequency in three-dimensional functionally graded shape memory alloy composite structures using meshless local Petrov–Galerkin method
Mohammad Hossein Abolbashari
2019-8
Adaptive inverse control of chatter vibrations in internal turning operations
Behnam Moetakef Imani
2019-8
Bingley, James George
Behrooz Hassani
2019-8
Comprehensive assessment of newly-developed slip-jump boundary conditions in high-speed rarefied gas flow simulations
Ehsan Roohi
2019-8
Effects of surface energy on vibration characteristics of double-walled piezo-viscoelastic cylindrical nanoshell
Ali Reza Fathi
2019-8
Experimental and Numerical Characterization of Drop Impact on a Hydrophobic Cylinder
Mohammad Passandideh-Fard
2019-8
Experimental study of using nano-(GNP, MWCNT, and SWCNT)/water to investigate the performance of a PVT module
Ali Kianifar,Asgar Bradaran Rahimi
2019-8
Investigation of an electro-osmotic micromixer with heterogeneous zeta-potential distribution at the wall
Hamid Niazmand
2019-8
Isogeometric analysis of in-plane functionally graded porous microplates using modified couple stress theory
Behrooz Hassani
2019-8
Multiscale asymptotic homogenization analysis of epoxy-based composites reinforced with different hexagonal nanosheets
Masoud Tahani
2019-8
Non-linear Frequency Response and Stability Analysis of Piezoelectric Nanoresonator Subjected to Electrostatic Excitation
Ali Reza Fathi
2019-8
Nonlinear dynamic response and frequency analysis of the FG-PCNS with surface energy effects
Ali Reza Fathi
2019-8
Optimization of Thermal Spray Parameters of NiAl/Cr2C3 Coating by Taguchi Method
Mohammad Hatami
2019-8
Optimizing chevron plate heat exchangers based on the second law of thermodynamics and genetic algorithm
Mahmood Farzaneh-Gord
2019-8
Single- and two-phase water jet impingement heat transfer on a hot moving surface
Asgar Bradaran Rahimi
2019-8
ε-NTU analysis of turbulent flow in a corrugated double pipe heat exchanger: A numerical investigation
Javad Abolfazli Esfahani
2019-8
Approaching Influence of Vehicle’s Properties in Crosswind and Overtaking Situations Using Multi-Step Taguchi Method
Majid Moavenian
2019-9
Dimensional analysis for estimating wetness terms of condensing steam using dry flow data
Mohammad Reza Mahpeykar
2019-9
Energy harvesting from unimorph piezoelectric circular plates under random acoustic and base acceleration excitations
Hamid Moeenfard
2019-9
Fabrication of Laminated Composite Grid Structures Using VIP
Jalil Rezaee Pazhand
2019-9
Influence of clay nanoparticles on hindering the undesirable solidification process
Mohammad Moghiman
2019-9
Nanoparticle loading effect on the performance of the paraffin thermal energy storage material for building applications
Ali Kianifar,Hamid Niazmand
2019-9
Nondimensional Parameters’ Effects on Hybrid Darrieus–Savonius Wind Turbine Performance
Mohammad Javad Maghrebi
2019-9
Nonlinear material and geometric analysis of thick functionally graded plates with nonlinear strain hardening using nonlinear finite element method
Mehran Kadkhodayan
2019-9
Numerical investigation into dynamic behaviors of axially moving functionally graded porous sandwich nanoplates reinforced with graphene platelets
Mehran Kadkhodayan
2019-9
Performance Evaluation of External and Mixed Compression Supersonic Air Intakes: Parametric Study
Javad Sepahi-Younsi
2019-9
Peristaltic flow and heat transfer of nanofluids in a sinusoidal wall channel: two-phase analytical study
Mohammad Hatami
2019-9
A decision-making methodology for material selection using genetic algorithm
Ali Akbar Akbari
2019-10
An optimization of heat transfer of nanofluid flow in a helically coiled pipe using Taguchi method
Mohammad Passandideh-Fard
2019-10
Design, analysis, and implementation of a new adaptive chatter control system in internal turning
Behnam Moetakef Imani
2019-10
Dynamic analysis of stiffened bi-directional functionally graded plates with porosities under a moving load by dynamic relaxation method with kinetic damping
Mehran Kadkhodayan
2019-10
Entropy generation of turbulent Cu–water nanofluid flow in a heat exchanger tube fitted with perforated conical rings
Javad Abolfazli Esfahani
2019-10
Evacuating liquid coatings from a diffusive oblique fin in micro-/mini-channels
Javad Abolfazli Esfahani
2019-10
Nanofluid flow and MHD mixed convection inside a vertical annulus with moving walls and transpiration considering the effect of Brownian motion and shape factor
Asgar Bradaran Rahimi
2019-10
Performance enhancement of model reference adaptive control through normalized Lyapunov design
Alireza Akbarzadeh Tootoonchi
2019-10
Proposal and assessment of a novel hybrid system for water desalination using solar and geothermal energy sources
Mahmood Farzaneh-Gord
2019-10
Pull-in instability and nonlinear vibration analysis of electrostatically piezoelectric nanoresonator with surface/interface effects
Ali Reza Fathi
2019-10
Relative importance of inter-particle mass transfer resistance in the modeling of adsorption chiller porous bed
Hamid Niazmand
2019-10
A review on potentials of coupling PCM storage modules to heat pipes and heat pumps
Javad Abolfazli Esfahani
2019-11
A study on the potential of carbon-based nanomaterials for enhancement of evaporation and water production
Hamid Niazmand
2019-11
Damping capacity in pseudo-elastic and ferro-elastic shape memory alloy-reinforced hybrid composite beam
Hamid Ekhteraei Toussi
2019-11
Direct Simulation Monte Carlo investigation of fluid characteristics and gas transport in porous microchannels
Ehsan Roohi
2019-11
Experimental evaluation of thermal performance and entropy generation inside a twisted U-tube equipped with twisted-tape inserts
Asgar Bradaran Rahimi
2019-11
LES investigation of sheet-cloud cavitation around a 3-D twisted wing with a NACA 16012 hydrofoil
Mahmoud Pasandidehfard,Ehsan Roohi
2019-11
Machine learning methods for precise calculation of temperature drop during a throttling process
Mahmood Farzaneh-Gord
2019-11
Mixing process and mass transfer in a novel design of induced-charge electrokinetic micromixer with a conductive mixing-chamber
Javad Abolfazli Esfahani
2019-11
Nonlinear dynamics and stability analysis of piezo-visco medium nanoshell resonator with electrostatic and harmonic actuation
Ali Reza Fathi
2019-11
Numerical Simulation of a Pitching Airfoil Under Dynamic Stall of Low Reynolds Number Flow
Mohammad Hassan Djavareshkian
2019-11
A comprehensive investigation into the performance, robustness, scalability and convergence of chaos-enhanced evolutionary algorithms with boundary constraints
Ali Reza Fathi
2019-12
A theoretical study of entropy generation of the combustion phenomenon in the porous medium burner
Hossein Ajam
2019-12
An analytical solution for buckling of plates with circular cutout subjected to non-uniform in-plane loading
Mahmoud Shariati
2019-12
An experimental investigation on flow-rate effects of internal CPOX reforming in SOFCs
Javad Abolfazli Esfahani
2019-12
An investigation on fatigue life evaluation and crack initiation of Al-GFRP bonded lap joints under four-point bending
Abdolrahman Jaamialahmadi,Khalil Farhangdoost
2019-12
Application of hetero junction CNTs as mass nanosensor using nonlocal strain gradient theory: An analytical solution
Mohammad Hossein Abolbashari
2019-12
Application of the pseudo-potential lattice Boltzmann model for simulating interaction of moving solids with liquids
Hamid Niazmand
2019-12
Closed-Form Dynamic Formulation of a General 6-P US Robot
Alireza Akbarzadeh Tootoonchi
2019-12
Effect of Compressor Emergency Shutdown in Various Compressor Station Configurations on Natural Gas Transmission Pipeline
Mahmood Farzaneh-Gord
2019-12
Experimental models to estimate supercooling behavior of ZrO2 nanofluid phase change materials
Mohammad Moghiman
2019-12
Modeling and Optimization of A-TIG Welding Process Using Taguchi Method and Statistical Analysis
Farhad Kolahan
2019-12
Numerical and analytical analysis of a robust flow regulator in electroosmotic microfluidic networks
Hamid Niazmand
2019-12
Numerical simulation of Al2O3-water nanofluid heat transfer and entropy generation in a cavity using a novel TVD hybrid LB method under the influence of an external magnetic field source
Mohammad Hassan Djavareshkian
2019-12
Numerical simulation of hail impact response of hybrid corrugated core sandwich panels
Jalil Rezaee Pazhand,Mahmoud Shariati
2019-12
Predicting entropy generation of a hybrid nanofluid containing graphene–platinum nanoparticles through a microchannel liquid block using neural networks
Ali Reza Teymourtash
2019-12
شبیه سازی عددی احتراق همزمان زیستتوده- کنسانترههای سولفیدی و تولید آلایندهها در کوره فلش ذوب مس
Mohammad Moghiman
2019-12
A comprehensive geometrical study on an induced-charge electrokinetic micromixer equipped with electrically conductive plates
Javad Abolfazli Esfahani
2020-1
A numerical and experimental study on the energy efficiency of a regenerative Heat and Mass Exchanger utilizing the counter-flow Maisotsenko cycle
Mahmood Farzaneh-Gord
2020-1
Adaptive particularly tunable fuzzy particle swarm optimization algorithm
Ali Reza Fathi
2020-1
Design, fabrication and experimental characterization of whole-thermoplastic microvalves and micropumps having micromilled liquid channels of rectangular and half-elliptical cross-sections
Mohammad Passandideh-Fard
2020-1
Error Estimation and Stress Recovery by Patch Equilibrium in the Isogeometric Analysis Method
Behrooz Hassani
2020-1
Fabrication of unconventional inertial microfluidic channels using wax 3D printing
Hamid Niazmand
2020-1
Isogeometric-based cross-sectional analysis of pre-twisted composite beams
Jalil Rezaee Pazhand
2020-1
Numerical investigation of heat transfer enhancement inside heat exchanger tubes fitted with perforated hollow cylinders
Javad Abolfazli Esfahani
2020-1
Optimization of backpropagation neural network-based models in EDM process using particle swarm optimization and simulated annealing algorithms
Farhad Kolahan
2020-1
Selecting best painting colour for crude oil storage tanks exterior surface
Mahmood Farzaneh-Gord,Hamid Niazmand
2020-1
A new design of liquid-cooled heat sink by altering the heat sink heat pipe application: Experimental approach and prediction via artificial neural network
Mohammad Passandideh-Fard
2020-2
A novel approach towards prediction of subsurface damage during machining metal matrix composites
Amir Ghandehariun
2020-2
An experimental and numerical investigation on active compliant joint made by shape memory alloy actuator
Ali Reza Fathi
2020-2
Application of Taguchi design in system identification: A simple, generally applicable and powerful method
Alireza Akbarzadeh Tootoonchi
2020-2
Effects of flexibility of conductive plate on efficiency of an induced-charge electrokinetic micro-mixer under constant and time-varying electric fields-A comprehensive parametric study
Javad Abolfazli Esfahani
2020-2
Exergy analysis of an industrial air separation unit for Liquefied Natural Gas production
Asgar Bradaran Rahimi,Mojtaba Mamourian
2020-2
Experimental and numerical investigation on hydrothermal performance of nanofluids in micro-tubes
Mahmood Farzaneh-Gord
2020-2
Experimental characterization of magnetic field effects on heat transfer coefficient and pressure drop for a ferrofluid flow in a circular tube
Mohammad Passandideh-Fard,Mohammad Javad Maghrebi
2020-2
Experimental investigation of the distinct effects of nanoparticles addition and urea-SCR after-treatment system on NOx emissions in a blended-biodiesel fueled internal combustion engine
Mohammad Moghiman
2020-2
Numerical and experimental study of discharge mechanism in the electrochemical discharge machining process
Sadegh Elhami
2020-2
Numerical study of turbulent flow inside heat exchangers using perforated louvered strip inserts
Javad Abolfazli Esfahani
2020-2
Pinch-off location and time during 2D droplet impact onto a wetted stationary cylinder using the lattice Boltzmann method
Javad Abolfazli Esfahani
2020-2
Shear-driven micro/nano flows simulation using Fokker Planck approach: Investigating accuracy and efficiency
Ehsan Roohi
2020-2
The performance assessment of nanofluid-based PVTs with and without transparent glass cover: outdoor experimental study with thermodynamics analysis
Ali Kianifar
2020-2
Thermo-hydraulic analysis and optimization of CuO/water nanofluid inside helically dimpled heat exchangers
Mahmood Farzaneh-Gord
2020-2
Wood surface treatment techniques for enhanced solar steam generation
Hamid Niazmand
2020-2
An experimental design of the solid oxide fuel cell performance by using partially oxidation reforming of natural gas
Javad Abolfazli Esfahani
2020-3
A numerical investigation on the Magnetophoretic-guided stem cells delivery in a bend blood vessel
Javad Abolfazli Esfahani
2020-3
Axisymmetric and three-dimensional flow simulation of a mixed compression supersonic air inlet
Javad Sepahi-Younsi
2020-3
Effect of sonication time on the evaporation rate of seawater containing a nanocomposite
Hamid Niazmand
2020-3
EFFECTOFAIRFOIL DISTANCETO WATERSURFACE ON STATIC STALL
Mohammad Hassan Djavareshkian
2020-3
Emotional neural networks with universal approximation property for stable direct adaptive nonlinear control systems
Alireza Akbarzadeh Tootoonchi
2020-3
Experimental and numerical study of circular hydraulic jumps on convex and flat target plates
Ali Reza Teymourtash,Mohammad Reza Mahpeykar
2020-3
Lattice Boltzmann simulation of diluted gas flow inside irregular shape microchannel by two relaxation times on the basis of wall function approach
Mohammad Bagher Ayani,Javad Abolfazli Esfahani
2020-3
Nonlinear dynamic analysis of moving bilayer plates resting on elastic foundations
Mehran Kadkhodayan
2020-3
Numerical Analysis of Water and Air in Venturi Tube to Produce Micro-Bubbles
Hamid Niazmand
2020-3
Precise prediction of biogas thermodynamic properties by using ANN algorithm
Mahmood Farzaneh-Gord
2020-3
Robotic hand: A review on linkage-driven finger mechanisms of prosthetic hands and evaluation of the performance criteria
Alireza Akbarzadeh Tootoonchi
2020-3
Thermal analysis on a nanofluid-filled rectangular cavity with heated fins of different geometries under magnetic field effects
Mohammad Hatami
2020-3
Transitional boundary layer study over an airfoil in combined pitch-plunge motions
Mohammad Javad Maghrebi
2020-3
A review of flame radiation research from the perspective of factors affecting the flame radiation, measurement and modeling
Hossein Ajam,Mohsen Ghazikhani
2020-4
Developing mathematical modeling of the heat and mass transfer in a planar micro-combustor with detailed reaction mechanisms
Javad Abolfazli Esfahani
2020-4
DIFFERENTIAL TRANSFORMATION METHOD FOR ANALYSIS OF NONLINEAR FLOW AND MASS TRANSFER THROUGH A CHANNEL FILLED WITH A POROUS MEDIUM
Mohammad Hatami
2020-4
Effect of water vapor condensation on the flow distribution in a PEM fuel cell stack
Ali Kianifar
2020-4
Effects of perforated anchors on heat transfer intensification of turbulence nanofluid flow in a pipe
Javad Abolfazli Esfahani
2020-4
Energy Absorption Analysis and Multi-objective Optimization of Tri-layer Cups Subjected to Quasi-static Axial Compressive Loading
Mehran Kadkhodayan
2020-4
Experimental and numerical investigation of polymethyl methacrylate scaffolds for bone tissue engineering
Ali Reza Fathi
2020-4
Experimental investigation of critical air entrainment in ventilated cavitating flow for a forward facing model
Mohammad Moghiman
2020-4
Non-axisymmetric three-dimensional stagnation-point flow and heat transfer under a jet impingement boiling
Asgar Bradaran Rahimi
2020-4
Nonlinear analysis of size-dependent annular sector and rectangular microplates under transverse loading and resting on foundations based on the modified couple stress theory
Mahmoud Shariati
2020-4
Numerical study of inlet air swirl intensity effect of a Methane-Air Diffusion Flame on its combustion characteristics
Mohammad Moghiman
2020-4
Simulating aeroelastic response of a self-sustained oscillating rigid airfoil using a boundary oscillation method
Mohammad Hassan Djavareshkian,Jalil Rezaee Pazhand
2020-4
The effects of nonlocal and surface/interface parameters on nonlinear vibrations of piezoelectric nanoresonator
Ali Reza Fathi
2020-4
Numerical simulation of blood flow in intracranial aneurysms treated by endovascular Woven EndoBridge technique
Hamid Niazmand
2020-5
CFD approach for two-phase CuO nanofluid flow through heat exchangers enhanced by double perforated louvered strip insert
Javad Abolfazli Esfahani
2020-5
Effect of hydrogen addition on conjugate heat transfer in a planar micro-combustor with the detailed reaction mechanism: An analytical approach
Javad Abolfazli Esfahani
2020-5
Energy, exergy and environmental analysis of glazed and unglazed PVT system integrated with phase change material: An experimental approach
Mohammad Passandideh-Fard
2020-5
Experimental and numerical investigation of fatigue crack growth behavior and optimizing fatigue life of riveted joints in Al-alloy 2024 plates
Mahmoud Shariati
2020-5
Experimental study and optimization of fracture properties of epoxy-based nano-composites: Effect of using nano-silica by GEP, RSM, DTM and PSO
Mahmoud Shariati
2020-5
Graphene-based mass sensors: Chaotic dynamics analysis using the nonlocal strain gradient model
Masoud Tahani
2020-5
Laminar-turbulent intermittency measurement based on the uncalibrated hot-film data
Mohammad Javad Maghrebi
2020-5
Melting process of paraffin wax inside plate heat exchanger: experimental and numerical study
Mohammad Bagher Ayani
2020-5
Nonlinear vibration and stability analysis of double-walled piezoelectric nanoresonator with nonlinear van der Waals and electrostatic excitation
Ali Reza Fathi
2020-5
Numerical investigation of drug delivery by using magnetic field in a 90-degree bent vessel: a 3D simulation
Hamid Niazmand
2020-5
Numerical investigation of turbulent CuO–water nanofluid inside heat exchanger enhanced with double V-cut twisted tapes
Javad Abolfazli Esfahani
2020-5
The hail impactor shape with an ice impact response of the laminated composites reinforced with different nanomaterials: an experimental approach
Mahmoud Shariati,Jalil Rezaee Pazhand
2020-5
Time-Frequency Analysis and Transitional Boundary Layer Investigation over a Pitching Airfoil
Mohammad Javad Maghrebi
2020-5
بهینهسازی ایزو ژئومتریک شکل سازههای دوبعدی با استفاده از تحلیل حساسیت کاملاً تحلیلی
Behrooz Hassani
2020-5
A parametric knot adaptation approach to isogeometric analysis of contact problems
Behrooz Hassani
2020-6
A study of the local entropy generation rate in a porous media burner
Javad Abolfazli Esfahani
2020-6
Design and Analysis of Porous Functionally Graded Femoral Prostheses with Improved Stress Shielding
Ali Reza Fathi
2020-6
Dynamic Characteristics of Functionalized Carbon Nanotube Reinforced Epoxy Composites: An Experimental Approach
Mahmoud Shariati,Jalil Rezaee Pazhand
2020-6
Experimental and numerical investigation of effect of size, position and geometry of some cutouts on fatigue life and crack growth path on AISI1045 steel plate
Mahmoud Shariati
2020-6
Experimental parametric study of a deep groove within a pin fin arrays regarding fin thermal resistance
Mohammad Bagher Ayani,Mojtaba Mamourian
2020-6
Nonlinear mechanics of soft composites: hyperelastic characterization of white matter tissue components
Seyed Abdolmajid Yousefsani
2020-6
Performance evaluation and optimization of design parameters for twisted conical strip inserts in tubular laminar flow Using Taguchi approach
Hossein Ajam
2020-6
Aerodynamic investigation of twist angle variation based on wing smarting for a flying wing
Mohammad Hassan Djavareshkian
2020-7
Application of nano electrolyte in the electrochemical discharge machining process
Sadegh Elhami
2020-7
Band structure analysis of wave propagation in piezoelectric nano-metamaterials as periodic nano-beams considering the small scale and surface effects
Mohammad Hossein Abolbashari
2020-7
Comprehensive techno-economic and environmental sensitivity analysis and multi-objective optimization of a novel heat and power system for natural gas city gate stations
Mahmood Farzaneh-Gord
2020-7
Design and Implementation of a Real-Time Nonlinear Model Predictive Controller for a Lower Limb Exoskeleton with Input Saturation
Alireza Akbarzadeh Tootoonchi
2020-7
Energy, exergy, economic analysis and optimization of single-effect absorption chiller network
Mahmood Farzaneh-Gord
2020-7
Experimental Study of Stable Circular Hydraulic Jumps
Ali Reza Teymourtash
2020-7
Flow-Driven Piezoelectric Energy Harvester on a Full-Span Wing for Micro-aerial-vehicle (MAV) Application
Ali Esmaeili
2020-7
On the Effects of Structural Coupling on Piezoelectric Energy Harvesting Systems Subject to Random Base Excitation
Hamid Moeenfard
2020-7
Optimal Trajectory Generation to Residual Vibration Reduction of Transport Process based on Dynamic Programming Algorithm
Alireza Akbarzadeh Tootoonchi
2020-7
Photocatalytic performance of aerogels for organic dyes removal from wastewaters: Review study
Mohammad Hatami
2020-7
Pull‐In and Snap‐Through Analysis of Electrically Actuated Viscoelastic Curved Microbeam
Hamid Ekhteraei Toussi
2020-7
Simulation of Combustion Flowfield in Porous Media with Lattice Boltzmann Method
Javad Abolfazli Esfahani
2020-7
Size-dependent analysis of a functionally graded piezoelectric micro-cylinder based on the strain gradient theory with the consideration of flexoelectric effect: plane strain problem
Mahmoud Shariati
2020-7
Study of the effects of shear piezoelectric actuators on the performance of laminated composite shells by an isogeometric approach
Behrooz Hassani
2020-7
Theoretical study on optimization of porous media burner by the improvement of coefficients of porosity variation equations
Hossein Ajam
2020-7
Two‐phase natural convection analysis and hybrid nanoparticle migration around micromixer blades
Mohammad Hatami
2020-7
Utilization of Herschal-Bulkley fluid in an inclined compliant channel
Mohammad Hatami
2020-7
Role of movement of the walls with time-dependent velocity on flow and mixed convection in vertical cylindrical annulus with suction / injection
Asgar Bradaran Rahimi
2020-8
Effects of smart flap on aerodynamic performance of sinusoidal leading-edge wings at low Reynolds numbers
Mohammad Hassan Djavareshkian
2020-8
Electrospun Nanofibrous Membranes for Preventing Tendon Adhesion
Mohammad Passandideh-Fard
2020-8
Improving the melting performance of PCM thermal energy storage with novel stepped fins
Javad Abolfazli Esfahani
2020-8
Low-Rank and Sparse Recovery of Human Gait Data
Ali Akbar Akbari,Alireza Akbarzadeh Tootoonchi
2020-8
Rotating Cylinder Turbulator Effect on the Heat Transfer of a Nanofluid Flow in a Wavy Divergent Channel
Mohammad Hatami
2020-8
Simultaneous modeling and structural analysis of curvilinearly stiffened plates using an isogeometric approach
Behrooz Hassani
2020-8
Three-dimensional printing of truss-like structure for use in scaffold: Experimental, numerical, and analytical analyses
Ali Reza Fathi
2020-8
A Human Interactive Hybrid FES-Robotic System Applicable to Improvement of Foot Drop after Stroke: Case Report of a Person with Chronic Stroke
Alireza Akbarzadeh Tootoonchi
2020-9
Cylindrical porous radiant burner with internal combustion regime: Energy saving analysis using response surface method
Javad Abolfazli Esfahani
2020-9
Effect of condensing cavity on the performance of a passive solar desalination system: an experimental study
Javad Abolfazli Esfahani,Mohammad Bagher Ayani
2020-9
Elastic wave propagation in 2D-FGM hollow cylinders with curved outer surface under moving shock loading using isogeometric analysis
Mohammad Hossein Abolbashari,Behrooz Hassani
2020-9
Numerical study and optimization of thermohydraulic characteristics of a graphene–platinum nanofluid in finned annulus using genetic algorithm combined with decision-making technique
Ali Reza Teymourtash,Mohammad Passandideh-Fard
2020-9
Numerical Study of Magnetic Field Influence on Three-Dimensional Flow Regime and Combined-Convection Heat Exchange Within Concentric and Eccentric Rotating Cylinders
Mahmood Farzaneh-Gord
2020-9
Performance Enhancement of a Supersonic Air Intake by Applying a Heat Source
Javad Sepahi-Younsi
2020-9
Taguchi parametric study on the radial and tangential cutting forces in Dry High Speed Machining (DHSM)
Mohammad Hatami
2020-9
The cyclic response of circular reinforced concrete column to foundation connections strengthened with shape memory alloy bars
Jalil Rezaee Pazhand
2020-9
The effect of core geometry on flexural stiffness and transverse shear rigidity of weight‐wise identical corrugated core sandwich panels reinforced with 3D flat spacer knitted fabric
Jalil Rezaee Pazhand
2020-9
Thermal and hydraulic performance analysis of a heat sink with corrugated channels and nanofluids
Ehsan Roohi
2020-9
A Vibrational Technique for In Vitro Intraoperative Prosthesis Fixation Monitoring
Seyed Abdolmajid Yousefsani
2020-10
Application of three dimensional porous aerogels as adsorbent for removal of heavy metal ions from water/wastewater: A review study
Mohammad Hatami
2020-10
Bone fracture healing under external fixator: Investigating impacts of several design parameters using Taguchi and ANOVA
Masoud Tahani
2020-10
Effects of natural gas compositions on its Joule–Thomson coefficients and Joule–Thomson inversion curves
Mahmood Farzaneh-Gord
2020-10
Energy, exergy and economic analysis of utilizing the supercritical CO2 recompression Brayton cycle integrated with solar energy in natural gas city gate station
Hamid Niazmand,Mahmood Farzaneh-Gord
2020-10
Experimental Study of Steam Injection into a Water Stream for Milk Sterilization
Mohammad Passandideh-Fard
2020-10
Generalized Thermoelastic Waves Propagation in Non-uniform Rational B-spline Rods Under Quadratic Thermal Shock Loading Using Isogeometric Approach
Mohammad Hossein Abolbashari
2020-10
Numerical analysis of nonlinear thermal stress flow between concentric elliptical cylinders
Ehsan Roohi,Ali Reza Teymourtash
2020-10
Parametric design and multi-objective optimization of a general 6-PUS parallel manipulator
Alireza Akbarzadeh Tootoonchi
2020-10
Sudden contraction effects in nanochannel cross section on the rarefied gas flow characteristics: LBM analysis
Javad Abolfazli Esfahani,Mohammad Bagher Ayani
2020-10
The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process
Mehran Kadkhodayan
2020-10
Investigation of the effect of variable heat flux on energy consumption and bread quality in the flat bread baking process by experimental and numerical methods
Ali Kianifar
2020-11
A new model of the contact force for the collision between two solid bodies
Anoshirvan Farshidianfar
2020-11
A novel hybrid DSMC-Fokker Planck algorithm implemented to rarefied gas flows
Ehsan Roohi
2020-11
Aero-thermo-elastic analysis of nonlinear isotropic cracked plate in supersonic flow
Jalil Rezaee Pazhand
2020-11
Electronic chipset thermal management using a nanofluid-based mini-channel heat sink: An experimental study
Mohammad Passandideh-Fard
2020-11
Enhanced solar desalination by delignified wood coated with bimetallic Fe/Pd nanoparticles
Hamid Niazmand
2020-11
Experimental investigation and cost analysis on a nanofluid-based desalination system integrated with an automatic dual-axis sun tracker and Fresnel lens
Mohammad Passandideh-Fard
2020-11
Experimental investigation into the effects of Mach number and boundary-layer bleed on flow stability of a supersonic air intake
Javad Sepahi-Younsi
2020-11
Experimental investigation of ground effects on aerodynamics of sinusoidal leading-edge wings
Mohammad Hassan Djavareshkian
2020-11
Experimental investigation of heat transfer enhancement of a heat exchanger tube equipped with double-cut twisted tapes
Mohammad Hatami
2020-11
LES study of unsteady cavitation characteristics of a 3-D hydrofoil with wavy leading edge
Ehsan Roohi
2020-11
Nonlinear dynamic modeling of a parallelogram flexure
Hamid Moeenfard
2020-11
Numerical investigation of wave interactions in an experimental wave-energy converter using OpenFOAM
Ehsan Roohi
2020-11
On the performance analysis of gas-actuated peristaltic micropumps
Mohammad Passandideh-Fard
2020-11
Prediction of peak and termination of novel coronavirus COVID-19 epidemic in Iran
Ehsan Roohi
2020-11
Prediction of Sound Speed in Natural-Gas Mixtures Using the CP-PC-SAFT Equation of State
Mahmood Farzaneh-Gord
2020-11
Recent developments of nanoparticles additives to the consumables liquids in internal combustion engines: Part I: Nano-fuels
Mohammad Hatami
2020-11
Validation and Comparison of Instrumented Mouthguards for Measuring Head Kinematics and Assessing Brain Deformation in Football Impacts
Seyed Abdolmajid Yousefsani
2020-11
Vibration of buckled sandwich beam with self-deployable SMA core and heat treated SMA reinforced hybrid composite faces
Jalil Rezaee Pazhand
2020-11
کنترل ارتعاشات لرزه ابزار داخلتراش با بهرهگیری از یک الگوریتم کنترل تطبیقی جدید با پسخور مستقیم سرعت
Behnam Moetakef Imani
2020-11
An intelligent approach for calculating natural gas compressibility factor and its application in ultrasonic flow meters
Mahmood Farzaneh-Gord
2020-12
Assist-As-Needed control of a hip exoskeleton based on a novel strength index
Alireza Akbarzadeh Tootoonchi,Iman Kardan
2020-12
Effect of Two Baffles on MHD Natural Convection in U-Shape Superposed by Solid Nanoparticle having Different Shapes
Mohammad Hatami
2020-12
Evaluation of the generalized bernoulli trial-transient adaptive subcell (GBT-TAS) collision scheme in treating rarefied gas flows
Ehsan Roohi
2020-12
Experimental and Numerical Analysis of Ratcheting Behavior of SS 316L Thin-Walled Pipes Subjected to Cyclic Internal Pressure
Mahmoud Shariati
2020-12
Heat transfer enhancement of conventional aluminum heat sinks with an innovative, cost-effective, and simple chemical roughening method
Mohammad Passandideh-Fard
2020-12
Hydroelastic analysis of surface gravity wave interacting with elastic plate resting on a linear viscoelastic foundation
Ali Reza Fathi
2020-12
Optimization of A-TIG Welding Process Using Simulated Annealing Algorithm
Farhad Kolahan
2020-12
Peristaltic Carreau-Yasuda nanofluid flow and mixed heat transfer analysis in an asymmetric vertical and tapered wavy wall channel
Mohammad Hatami
2020-12
Recent developments of nanoparticles additives to the consumables liquids in internal combustion engines: Part II: Nano-lubricants
Mohammad Hatami
2020-12
Recent developments of nanoparticles additives to the consumables liquids in internal combustion engines: Part III: Nano-coolants
Mohammad Hatami
2020-12
A numerical study on the effects of nanoparticles and stair fins on performance improvement of phase change thermal energy storages
Mohammad Hatami
2021-1
Closed-loop control of microstructure and mechanical properties in additive manufacturing by directed energy deposition
Mohammad Hossein Farshidianfar
2021-1
Design and multi-criteria optimisation of a trigeneration district energy system based on gas turbine, Kalina, and ejector cycles: Exergoeconomic and exergoenvironmental evaluation
Mahmood Farzaneh-Gord
2021-1
Low-cost zinc-oxide nanoparticles for solar-powered steam production: Superficial and volumetric approaches
Hamid Niazmand
2021-1
MHD and Viscous Dissipation Effects in Marangoni Mixed Flow of a Nanofluid over an Inclined Plate in the Presence of Ohmic Heating
Mohammad Hatami
2021-1
Numerical study on heat and mass transfer behavior of pool boiling in LiBr/H2O absorption chiller generator considering different tube surfaces
Mahmood Farzaneh-Gord
2021-1
On the influence of resin pocket area on the failure of tapered sandwich composites
Masoud Tahani
2021-1
Thermo-economic analysis and optimization of the steam absorption chiller network plant
Mahmood Farzaneh-Gord
2021-1
Vibrational Analysis of Cables Using the Non Standard Finite Difference Method
Mohammad Hossein Abolbashari
2021-1
An updated review of the performance of nanofluid-based photovoltaic thermal systems from energy, exergy, economic, and environmental (4E) approaches
Mohammad Passandideh-Fard
2021-2
Assessment of a cylindrical porous radiant burner with internal combustion regime for sustainable energy: Numerical analysis of the radiant efficiency and NO production
Javad Abolfazli Esfahani
2021-2
Assessment of a District Trigeneration Biomass Powered Double Organic Rankine Cycle as Primed Mover and Supported Cooling
Javad Abolfazli Esfahani
2021-2
Binary gas mixtures separation using microscale radiometric pumps
Ehsan Roohi
2021-2
Dual filler functionally graded polymermaterials – manufacturing process and characteristics
Sadegh Elhami
2021-2
Intensification of mixing-pumping process in a novel active micropump-mixer with maximum efficiency and minimum energy cost: A LBM-RSM approach
Hamid Niazmand
2021-2
Investigation on nonlinear dynamics and active control of boring bar chatter
Behnam Moetakef Imani
2021-2
Magnetic nanofluid behavior including an immersed rotating conductive cylinder: finite element analysis
Mohammad Hatami
2021-2
MIXED CONVECTION HEAT TRANSFER OF SIO2-WATER AND ALUMINA-PAO NANO-LUBRICANTS USED IN A MECHANICAL BALL BEARING
Mohammad Hatami
2021-2
Nonlinear Vibration Analysis of Beam Microgyroscopes using Nonlocal Strain Gradient Theory
Masoud Tahani
2021-2
Performance investigation of a novel hybrid system for simultaneous production of cooling, heating, and electricity
Mahmood Farzaneh-Gord
2021-2
The influence of GNP and nano-silica additives on fatigue life and crack initiation phase of Al-GFRP bonded lap joints subjected to four-point bending
Abdolrahman Jaamialahmadi
2021-2
Adaptive predictive control of a novel shape memory alloy rod actuator
Ali Reza Fathi
2021-3
Determination of corrugated core sandwich panels elastic constant based on three different experimental methods and effect of structural integrity on flexural properties
Jalil Rezaee Pazhand
2021-3
Experimental study of a nanofluid-based indirect solar cooker: Energy and exergy analyses
Ali Kianifar
2021-3
Experimental, numerical, and multi-objective optimization investigations on the energy absorption features of single- and bi-layer deep-drawn cups
Mehran Kadkhodayan
2021-3
Geometrically nonlinear thermohermo-mechanical analysis of grapheneraphene-reinforced moving polymer nanoplates
Mehran Kadkhodayan
2021-3
Homogeneous Relaxation and Shock Wave Problems: Assessment of the Simplified and Generalized Bernoulli Trial Collision Schemes
Ehsan Roohi
2021-3
Investigation of shear forces in twisted carbon nanotube bundles using a structural mechanics approach
Mahmoud Shariati
2021-3
Multi-objective optimal structural design of composite superstructure using a novel MONMPSO algorithm
Ali Reza Fathi
2021-3
Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment
Mehran Kadkhodayan
2021-3
The performance improvement of an indirect solar cooker using multi-walled carbon nanotube-oil nanofluid: An experimental study with thermodynamic analysis
Ali Kianifar
2021-3
A mechanobiological approach to find the optimal thickness for the locking compression plate: Finite element investigations
Masoud Tahani
2021-4
A new open-access platform for measuring and sharing mTBI data
Seyed Abdolmajid Yousefsani
2021-4
Analytical study of vibro-acoustic response of a human aorta subjected to an ultrasound wave
Aref Afsharfard
2021-4
Fatigue Assessment of 2024-T351 Aluminum Alloy Under Uniaxial Cyclic Loading
Mahmoud Shariati,Mehran Kadkhodayan
2021-4
Geometry optimization for a rectangular corrugated tube in supercritical water reactors (SCWRs) using alumina-water nanofluid as coolant
Mohammad Hatami
2021-4
Investigation and optimization of heat transfer coefficient of MWCNTs-Water nanofluids in a plate heat exchanger
Mohammad Javad Maghrebi,Ali Reza Teymourtash
2021-4
Investigation effects of roughness in wet steam flow with Buckingham Pi-theorem
Mohammad Reza Mahpeykar
2021-4
Modified Burzynski criterion along with AFR and non-AFR for asymmetric anisotropic materials
Mehran Kadkhodayan
2021-4
Nonlinear extensional-flexural vibrations in variable cross section beams with eccentric intermediate mass
Hamid Moeenfard,Majid Moavenian
2021-4
The Optimal Adaptive-Based Neurofuzzy Control of the 3-DOF Musculoskeletal System of Human Arm in a 2D Plane
Ali Akbar Akbari
2021-4
روکش کاری لیزری درسال های اخیر
Mohammad Hossein Farshidianfar,Anoshirvan Farshidianfar
2021-4
A numerical study of the entropy generation and heat transfer rate of airflow around a NACA 0015 airfoil subjected to an external magnetic field
Mohammad Hassan Djavareshkian
2021-5
Activated Gas Tungsten Arc Welding Process Optimization Using Artificial Neural Network and Heuristic Algorithms
Farhad Kolahan
2021-5
An experimental and numerical study on the crush responses and energy absorption characteristics of single and bi layer cups under low velocity impact
Mehran Kadkhodayan
2021-5
Analysis of entropy generation and thermal–hydraulic of various plate-pin fin-splitter heat recovery systems using Al2O3/H2O nanofluid
Javad Abolfazli Esfahani
2021-5
Assessment of anisotropic minimum-dissipation (AMD) subgrid-scale model: Gently-curved backward-facing step flow
Ehsan Roohi
2021-5
Improvement in the performance and cost of passive solar stills using a finned-wall/built-in condenser: An experimental study
Javad Abolfazli Esfahani,Mohammad Bagher Ayani
2021-5
On the importance of proper kernel normalization procedure in nonlocal integral continuum modeling of nanobeams
Behrooz Hassani
2021-5
Performance Investigation of Simple Low-dissipation AUSM (SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam Turbine Cascade Blades
Mahmoud Pasandidehfard,Mohammad Reza Mahpeykar
2021-5
RETRACTED ARTICLE: Numerical Modeling for the Photocatalytic Degradation of Methyl Orange from Aqueous Solution using Cellulose/Zinc Oxide Hybrid Aerogel: Comparison with Experimental Data
Mohammad Hatami
2021-5
Simultaneously Modeling and Optimization of Heat Affected Zone and Tensile Strength in GTAW Process Using Simulated Annealing Algorithm
Farhad Kolahan
2021-5
Thermodynamic assessment and performance optimization of solid oxide fuel cell-Stirling heat engine–reverse osmosis desalination
Mahmood Farzaneh-Gord
2021-5
Evaluation of Darrieus wind turbine for different highway settings using CFD simulation
Mohammad Javad Maghrebi
2021-6
Experiment-based affect heuristic using fuzzy rules and Taguchi statistical method for tuning complex systems
Alireza Akbarzadeh Tootoonchi
2021-6
Experimental study of low Reynolds number effects on aerodynamics of smooth and sinusoidal leading-edge wings in the vicinity of the ground
Mohammad Hassan Djavareshkian
2021-6
Flow control method by applying flexible shells procedure in transonic flow
Mohammad Hassan Djavareshkian
2021-6
Free vibration analysis of integrated and non-integrated corrugated core sandwich panels reinforced with weft-knitted fabrics
Jalil Rezaee Pazhand
2021-6
Generalized description of the Knudsen layer thickness in rarefied gas flows
Ehsan Roohi
2021-6
Hygrothermal degradation of elastic properties of fiber reinforced composites: A micro-scale finite element analysis
Ali Reza Fathi
2021-6
Improvement of wind turbine aerodynamic performance by vanquishing stall with active multi air jet blowing
Mohammad Javad Maghrebi
2021-6
Optimization of fins arrangements for the square light emitting diode (LED) cooling through nanofluid-filled microchannel
Mohammad Hatami
2021-6
Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated
Mehran Kadkhodayan
2021-6
Simulation of methane steam reforming in a catalytic micro-reactor using a combined analytical approach and response surface methodology
Javad Abolfazli Esfahani
2021-6
Solar radiation effects on MHD stagnation point flow and heat transfer of a nanofluid over a stretching sheet
Mohammad Hatami
2021-6
A novel modeling of energy extraction from nonlinear vortex-induced vibrations
Aref Afsharfard
2021-7
Acceleration of melting process of phase change material using an innovative triplex-tube helical-coil storage unit: Three-dimensional numerical study
Hamid Niazmand
2021-7
Accurate determination of natural gas compressibility factor by measuring temperature, pressure and Joule-Thomson coefficient: Artificial neural network approach
Mahmood Farzaneh-Gord
2021-7
Assessment of solar chimney combined with phase change materials
Javad Abolfazli Esfahani
2021-7
Bending, Buckling and Vibrations Analysis of the Graphene Nanoplate Using the Modified Couple Stress Theory
Mahmoud Shariati
2021-7
Bispacer Multi-Stage Direct Contact Membrane Distillation System: Analytical and Experimental Study
Mohammad Hossein Farshidianfar,Anoshirvan Farshidianfar
2021-7
Characterization of Polygonal Hydraulic Jump during Liquid Jet Impingement on a Flat Substrate
Mohammad Passandideh-Fard
2021-7
Design and analysis of an electroosmotic micro-reactor and its application on controlling a chemical reaction
Hamid Niazmand
2021-7
Effects of water-aluminum oxide nanofluid on double pipe heat exchanger with gear disc turbulators: A numerical investigation
Javad Abolfazli Esfahani
2021-7
Energy and entropy generation analyses of a nanofluid-based helically coiled pipe under a constant magnetic field using smooth and micro-fin pipes: Experimental study and prediction via ANFIS model
Mohammad Passandideh-Fard
2021-7
Fabrication and experimental characterization of a modified heat-sink based on a semi-active/passive cooling strategy with fluid flow and nano-enhanced phase change material
Mohammad Passandideh-Fard
2021-7
Flow and thermal field investigation of rarefied gas in a trapezoidal micro/nano-cavity using DSMC
Ehsan Roohi
2021-7
Implementation of weighted essentially non‐oscillatory scheme for unsteady and steady compressible flow in pressure‐based algorithm
Mohammad Hassan Djavareshkian
2021-7
Investigation of the Different Morphologies of Zinc Oxide (ZnO) in Cellulose/ZnO Hybrid Aerogel on the Photocatalytic Degradation Efficiency of Methyl Orange
Mohammad Hatami
2021-7
Numerical investigation of the effects of cannula geometry on hydraulic blood flow to prevent the risk of thrombosis
Hamid Niazmand
2021-7
Optimization of Enhanced TIG Welding Process Using Artificial Neural Network and Heuristic Algorithms
Farhad Kolahan
2021-7
A survey of stability in curved-beam/curved-electrode MEMS element
Hamid Ekhteraei Toussi
2021-8
Effects of CuO nano powder on performance improvement and entropy production of double-pipe heat exchanger with innovative perforated turbulators
Mohammad Hatami
2021-8
Multi-purpose prediction of the various edge cut twisted tape insert characteristics: multilayer perceptron network modeling
Javad Abolfazli Esfahani
2021-8
Numerical Analysis of the Heterogeneity Effect on Electroosmotic Micromixers Based on the Standard Deviation of Concentration and Mixing Entropy Index
Hamid Niazmand
2021-8
Using a back propagation neutral network based modeling and heuristic algorithms based optimization technique in activated gas tungsten arc welding process
Farhad Kolahan
2021-8
بهبود ضریب توان توربین بادی محور عمودی داریوس به کمک ایرفویل های تغییر شکل پذیر
Mohammad Javad Maghrebi
2021-8
Analysis of Separation Control Authority of DBD Plasma Actuator using Hot-Film Sensor Array
Mohammad Javad Maghrebi
2021-9
Image-based computational hemodynamic analysis of an anterior communicating aneurysm treated with the Woven EndoBridge device
Hamid Niazmand
2021-9
Improving the performance of a nanofluid-based photovoltaic thermal module utilizing dual-axis solar tracker system: Experimental examination and thermodynamic analysis
Mohammad Passandideh-Fard
2021-9
Numerical study of free-fall cylinder water entry using an efficient three-phase lattice Boltzmann method with automatic interface capturing capability
Hamid Niazmand
2021-9
Optimum loading of aluminum additive particles in unconsolidated beds of finned flat-tube heat exchangers in an adsorption cooling system
Hamid Niazmand
2021-9
Osteosynthesis of diaphyseal tibia fracture with locking compression plates: A numerical investigation using Taguchi and ANOVA
Masoud Tahani
2021-9
Physical-based methodology for prediction of weld bead characteristics in the Laser Edge Welding process
Mohammad Hossein Farshidianfar,Anoshirvan Farshidianfar
2021-9
Soft computing analysis of thermohydraulic enhancement using twisted tapes in a flat-plate solar collector: Sensitivity analysis and multi-objective optimization
Javad Abolfazli Esfahani
2021-9
Study of structural, electronic, and mechanical properties of pure and hydrogenated multilayer penta-graphene nano-plates using density functional theory
Masoud Tahani
2021-9
Acoustic and phase portrait analysis of leading-edge roughness element on laminar separation bubbles at low Reynolds number flow
Mohammad Hassan Djavareshkian,Ali Esmaeili
2021-10
Application of the Traveling Salesman Problem in Generating an Optimized Collision-Free Tool Path for CNC Drilling
Amir Ghandehariun
2021-10
Characterisation of a plate heat exchanger chevron type with carbon-based nanofluids under pulsed condition
Mohammad Javad Maghrebi
2021-10
Closed-loop deposition of martensitic stainless steel during laser additive manufacturing to control microstructure and mechanical properties
Mohammad Hossein Farshidianfar
2021-10
Employment of ultrasonic assisted turning in the fabrication of microtextures to improve the surface adhesion of the titanium implant
Sadegh Elhami
2021-10
Experimental investigation of performance improvement of double-pipe heat exchangers with novel perforated elliptic turbulators
Mohammad Hatami
2021-10
Experimental Study of Using Ethyl Ether-Acetaldehyde Solution in A Solar-Driven Absorption Chiller Integrated with A Parabolic Trough Solar Concentrator
Mohammad Moghiman
2021-10
Failure analysis of fiberglass‐vinyl ester composite cylinders subjected to fire and asymmetric transient pressure
Masoud Tahani
2021-10
Integrated Vapor Compression Chiller with Bottoming Organic Rankine Cycle and Onsite Low-Grade Renewable Energy
Javad Abolfazli Esfahani
2021-10
Modeling and optimization of A-GTAW process using Box–Behnken design and hybrid BPNN-PSO approach
Farhad Kolahan
2021-10
Numerical simulation of the effect of sulfide concentrate particle size on pollutant emission from flash smelting furnace
Mohammad Moghiman
2021-10
Numerical Study of Porous Media Effect on the Blade Surface of Vertical Axis Wind Turbine for Enhancement of Aerodynamic Performance
Mohammad Javad Maghrebi
2021-10
Performance assessment and multi-objective optimization of an organic Rankine cycles and vapor compression cycle based combined cooling, heating, and power system
Javad Abolfazli Esfahani
2021-10
Phase portrait analysis of laminar separation bubble and ground clearance interaction at critical (low) Reynolds number flow
Ali Esmaeili
2021-10
Tangential Flue Gas Recirculation (TFGR) technique for enhancement of radiation characteristics and reduction of NOx emission in natural gas burners
Mohammad Moghiman
2021-10
Determination of optimum organic Rankine cycle parameters and configuration for utilizing waste heat in the steel industry as a driver of receive osmosis system
Asgar Bradaran Rahimi
2021-11
اثر تعداد صفحه بر شرایط بهینه مبدل حرارتی صفحهای واشردار با هیبرید گرافن-نانولوله کربنی
Mohammad Javad Maghrebi,Ali Reza Teymourtash
2021-11
Combined Feedback Feedforward Control of a 3-Link Musculoskeletal System Based on the Iterative Training Method
Ali Akbar Akbari
2021-11
Energy, exergy, and eco-environment modeling of proton exchange membrane electrolyzer coupled with power cycles: Application in natural gas pressure reduction stations
Mahmood Farzaneh-Gord
2021-11
Experimental, Modeling, and Optimization Investigation on Mechanical Properties and the Crashworthiness of Thin-Walled Frusta of Silica/Epoxy Nano-composites: Fuzzy Neural Network, Particle Swarm Optimization/Multivariate Nonlinear Regression, and Gene Expression Programming
Mahmoud Shariati
2021-11
Non-Newtonian nanofluid natural convective heat transfer in an inclined Half-annulus porous enclosure using FEM
Mohammad Hatami
2021-11
Numerical and Experimental Study of Cross-Sectional Effects on the Mixing Performance of the Spiral Microfluidics
Hamid Niazmand
2021-11
Optimization of Connecting Rod Design Parameters for External Fixation System: A Biomechanical Study
Masoud Tahani
2021-11
OPTIMIZATION OF OXIDE-BASED ACTIVATING FLUX COMBINATION FORMULA IN ACTIVATED TUNGSTEN INERT GAS WELDING USING A HYBRID METHOD INCLUDING ARTIFICIAL NEURAL NETWORKS AND PARTICLE SWARM OPTIMIZATION
Farhad Kolahan
2021-11
Optimum Dynamic Design of a Stewart Platform with Symmetric Weight Compensation System
Alireza Akbarzadeh Tootoonchi
2021-11
Statistical analysis and optimization of photodegradation efficiency of methyl orange from aqueous solution using cellulose/zinc oxide hybrid aerogel by response surface methodology (RSM)
Mohammad Hatami
2021-11
The MHD Newtonian hybrid nanofluid flow and mass transfer analysis due to super-linear stretching sheet embedded in porous medium
Mohammad Hatami
2021-11
Experimental evaluation of performance intensification of double-pipe heat exchangers with rotary elliptical inserts
Mohammad Hatami
2021-12
An evaluation of the loading condition on mixed-mode stress intensity factors for CTST specimens made of 2024-T351 aluminum alloy
Khalil Farhangdoost
2021-12
Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams
Mehran Kadkhodayan
2021-12
Applying response surface method to optimize the performance of a divergent-chimney solar power plant
Mohammad Bagher Ayani
2021-12
Bending and Buckling Analysis of a Nth-Order Shear Deformation Nanoplate using Modified Couple Stress Theory
Mahmoud Shariati
2021-12
Development of a fuzzy-state feedback regulator for stabilizing a flexible inverted pendulum system
Hamid Moeenfard
2021-12
Evaluation of machine learning-based applications in forecasting the performance of single effect absorption chiller network
Mahmood Farzaneh-Gord
2021-12
Free vibration of bi-directional functionally graded imperfect nanobeams under rotational velocity
Mehran Kadkhodayan
2021-12
Geometrical inlet effects on the behavior of a non-premixed fully turbulent syngas combustion; a numerical study
Javad Abolfazli Esfahani
2021-12
Heatlines Analysis of Natural Convection in an Enclosure Divided by Sinusoidal Porous Layer and Filled by Cu-Water Nanofluid with Magnetic Field Effect
Mohammad Hatami
2021-12
Investigating on the influence of multi‐walled carbon nanotube and graphene nanoplatelet additives on residual strength of bonded joints subjected to partial fatigue loading
Mahmoud Shariati
2021-12
Investigation of heated fins geometries on the heat transfer of a channel filled by hybrid nanofluids under the electric field
Mohammad Hatami
2021-12
Investigation of operation parameters on the removal efficiency of methyl orange pollutant by cellulose/zinc oxide hybrid aerogel
Mohammad Hatami
2021-12
Modeling and optimization of A-GTAW process using back propagation neural network and heuristic algorithms
Farhad Kolahan
2021-12
Navier slip effect on the thermal-flow of Walters’ liquid B flow due to porous stretching/shrinking with heat and mass transfer
Mohammad Hatami
2021-12
Numerical Investigation of Flow and Heat Transfer From a Rotating Sphere With Constant Angular Velocity Around Vertical Axis Floating in Stationary Fluid
Asgar Bradaran Rahimi
2021-12
Static roughness element effects on protuberance full-span wing at micro aerial vehicle application
Mohammad Hassan Djavareshkian,Ali Esmaeili
2021-12
Thermal optimization for the tangential swirl burner at the rotary furnace of steel pipe industry to save energy and reduce emissions
Mohammad Hatami
2021-12
Thermophoresis and Brownian diffusion of nanoparticles around a vertical cone in a porous media by Galerkin finite element method (GFEM)
Mohammad Hatami
2021-12
Using Hybrid Artificial Neural Network and Particle Swarm Optimization Algorithm for Modeling and Optimization of Welding Process
Farhad Kolahan
2021-12
محاسبه دقیق بردارهای گرهی در تحلیل آیزوژئومتری سازههای پوستهای با استفاده از نقاط گریویل
Behrooz Hassani
2021-12
A novel multiscale parallel finite element method for the study of the hygrothermal aging effect on the composite materials
Ali Reza Fathi
2022-1
A symmetrized and simplified Bernoulli trial collision scheme in direct simulation Monte Carlo
Ehsan Roohi
2022-1
Analysis of three-dimensional cavitating flow over different cavitators using boundary element method
Mahmoud Pasandidehfard
2022-1
Effects of boundary-layer bleed parameters on supersonic intake buzz
Javad Sepahi-Younsi
2022-1
Experimental study and analytical modeling of sound transmission through honeycomb sandwich panels using SEA method
Anoshirvan Farshidianfar
2022-1
Experimental study on the radiative heat transfer in a multi-hole porous radiant burner with internal combustion regime
Javad Abolfazli Esfahani
2022-1
Improvement of roller cone drill bit design by using finite element method and experimental study
Behrooz Hassani
2022-1
Turbulent transient boundary layer over a flat plate
Mahmoud Pasandidehfard
2022-1
Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes
Ali Reza Teymourtash
2022-1
Aerodynamic simulation of plunging airfoil with heat effects and Lattice Boltzmann technique
Mohammad Hassan Djavareshkian
2022-2
Investigation of radiation and MHD on non-Newtonian fluid flow over a stretching/shrinking sheet with CNTs and mass transpiration
Mohammad Hatami
2022-2
Isogeometric analysis of FG polymer nanocomposite plates reinforced with reduced graphene oxide using MCST
Behrooz Hassani
2022-2
MHD mixed convection and entropy generation of CNT-water nanofluid in a wavy lid-driven porous enclosure at different boundary conditions
Mohammad Hatami
2022-2
Techno-economic and techno-environmental assessment and multi-objective optimization of a new CCHP system based on waste heat recovery from regenerative Brayton cycle
Mahmood Farzaneh-Gord
2022-2
A lab-scale study on thermal performance enhancement of phase change material containing multi-wall carbon nanotubes for buildings free-cooling
Ali Kianifar,Hamid Niazmand
2022-3
A three-dimensional numerical study of the effects of various twisted tapes on heat transfer characteristics and flow field in a tube: Experimental validation and multi-objective optimization via response surface methodology
Ali Kianifar
2022-3
Analyses of non-Fourier heat conduction in 1-D spherical biological tissue based on dual-phase-lag bio-heat model using the conservation element/solution element (CE/SE) method: A numerical study
Mohammad Bagher Ayani
2022-3
Experimental investigation of hard spline milling using a newly developed disk cutter
Amir Ghandehariun
2022-3
Investigation of super-critical water-based nanofluid with different nanoparticles (shapes and types) used in the rectangular corrugated tube of reactors
Mohammad Hatami
2022-3
Numerical analysis of vacuum drying of a porous body in the integrated domain
Mohammad Bagher Ayani
2022-3
Optimal operation of a multi-generation district energy hub based on electrical, heating, and cooling demands and hydrogen production
Mahmood Farzaneh-Gord
2022-3
Prediction of natural gas density using only three measurable properties: intelligence and mathematical approaches
Mahmood Farzaneh-Gord
2022-3
Radiation effect on inclined MHD flow past a super-linear stretching/shrinking sheet including CNTs
Mohammad Hatami
2022-3
Thermo-economical and environmental analyses of a Direct Contact Membrane Distillation (DCMD) performance
Mahmood Farzaneh-Gord
2022-3
Tribological properties of vibro-mechanical texturing during face turning processes
Sadegh Elhami
2022-3
Turbulence Structures in Accelerated Flow over a Flat Plate with Non-Zero Pressure Gradient
Mahmoud Pasandidehfard
2022-3
تحلیل تجربی و عددی جذب انرژی توسط لوله های آلومینیومی جدار ضخیم توخالی و پرشده با فوم با درنظر گرفتن مدلهای آسیب متفاوت
Mahmoud Shariati
2022-3
تحلیل دینامیکی میکرو المان منعطف موازی با مدل قیدی تیر و تئوری گرادیان کرنشی اصلاح یافته
Hamid Moeenfard
2022-3
A comparative study of bone remodeling around hydroxyapatite-coated and novel radial functionally graded dental implants using finite element simulation
Masoud Tahani
2022-4
Analysis of Cylindrical Damper Effects on Turbine Meters Accuracy in a Pulsating CNG Suction Line: An Optimal Design through CFD Simulations
Mahmood Farzaneh-Gord
2022-4
Effects of bleed type on the performance of a supersonic intake
Javad Sepahi-Younsi
2022-4
Interfacial solar steam generation by sawdust coated with W doped VO2
Hamid Niazmand
2022-4
MHD micropolar fluid flow over a stretching/shrinking sheet with dissipation of energy and stress work considering mass transpiration and thermal radiation
Mohammad Hatami
2022-4
Strain gradient bistability of bimorph piezoelectric curved beam interacting with a curved electrode
Masoud Tahani
2022-4
مطالعه عددی تاثیر پارامترهای ساختاری و عملکردی در احتراق غیر پیشآمیخته گاز طبیعی در سه لوله تابشی با هندسههای مختلف
Mohammad Moghiman
2022-4
A deep learning strategy for EMG-based joint position prediction in hip exoskeleton assistive robots
Alireza Akbarzadeh Tootoonchi
2022-5
A size-dependent study on buckling and post-buckling behavior of imperfect piezo-flexomagnetic nano-plate strips
Masoud Tahani
2022-5
Analysis of a Stagnation Point Flow With Hybrid Nanoparticles Over a Porous Medium
Mohammad Hatami
2022-5
Comparative modeling of abrasive waterjet machining process based on OA-Taguchi and D-optimal approach and optimization using simulated annealing algorithm
Farhad Kolahan
2022-5
Controlled release of azithromycin from polycaprolactone/chitosan nanofibrous membranes
Mohammad Passandideh-Fard
2022-5
Development of optimal polymeric foams with superior sound absorption and transmission loss
Hamid Moeenfard
2022-5
Examination of the effects of porosity upon intensification of thermal storage of PCMs in a shell-and-tube type system
Javad Abolfazli Esfahani
2022-5
Experimental and numerical analyses of damaged-steel plate reinforced by CFRP patch in moisture and the acidic environment under tensile test
Mehran Kadkhodayan
2022-5
Experimental investigation on frequency pulsation effects on a single pass plate heat exchanger performance
Mohammad Javad Maghrebi
2022-5
High velocity impact response of corrugated core composite sandwich structures
Mahmoud Shariati
2022-5
On the nonlinear thermal stress, thermal creep, and thermal edge flows in triangular cavities
Ehsan Roohi
2022-5
بررسی آزمایشگاهی اثر دبی و غلظت نانوسیال گرافن-آب و یافتن شرایط مطلوب به کمک روش تاگوچی
Mohammad Javad Maghrebi,Ali Reza Teymourtash
2022-5
A finite element study of a fractured tibia treated with a unilateral external fixator: The effects of the number of pins and cortical thickness
Masoud Tahani
2022-6
A study on micro-step flow using a hybrid direct simulation Monte Carlo–Fokker–Planck approach
Ehsan Roohi
2022-6
CuS nanosheet-induced local hot spots on g-C 3 N 4 boost photocatalytic hydrogen evolution
Mohammad Hatami
2022-6
Dross formation modeling in the laser beam cutting process using energy-based and gas-based parameters
Mohammad Hossein Farshidianfar,Anoshirvan Farshidianfar
2022-6
Effect of Cattaneo-Christov approximation for viscoelastic fluid with carbon nanotubes on flow and heat transfer
Mohammad Hatami
2022-6
ENTROPY GENERATION ANALYSIS FOR A NON-AXISYMMETRIC FLOW OVER A ROTATING POROUS DISK
Javad Abolfazli Esfahani
2022-6
Experimental and numerical study for the effect of aqueous solution on heat transfer characteristics of two phase close thermosyphon
Mohammad Hatami
2022-6
Improving the performance of mini-channel heat sink by using wavy channel and different types of nanofluids
Mohammad Hatami
2022-6
Nanofibrous polycaprolactone/chitosan membranes for preventing postsurgical tendon adhesion
Mohammad Passandideh-Fard,Masoud Tahani
2022-6
On the performance of an innovative electronic chipset thermal management module based on energy storage unit concept utilizing nano-additive phase change material (NPCM)
Mohammad Passandideh-Fard
2022-6
A novel electrokinetic micromixing system with conductive mixing-enclosure-A geometrical study
Javad Abolfazli Esfahani
2022-7
Beyond pull-in angle control of a dual axis torsional micro-actuator considering bending effects
Hamid Moeenfard
2022-7
Effect of grooving textured tool on the titanium chip morphology
Sadegh Elhami
2022-7
Minimization of Nonproductive Time in Drilling: A New Tool Path Generation Algorithm for Complex Parts
Amir Ghandehariun
2022-7
Neural network modeling for rigorous simulation of mid-pressure reciprocating expansion engines performance
Mahmood Farzaneh-Gord
2022-7
On the Use of High-Order Shape Functions in the SAFE Method and Their Performance in Wave Propagation Problems
Jalil Rezaee Pazhand,Majid Moavenian
2022-7
Optimization of the pitch to chord ratio for a cascade turbine blade in wet steam flow
Ali Reza Teymourtash
2022-7
The precise designation of natural gas volumetric flow by measuring simple thermodynamic properties and using artificial intelligence methods
Mahmood Farzaneh-Gord
2022-7
بهبود توزیع ریان گاز در توده پیلسوختی پلیمری با خرو آب مایع از منیفولد
Ali Kianifar
2022-7
شبیهسازی عددی دایش ریان در یک نازل سهموی بهینه تراست
Mahmoud Pasandidehfard
2022-7
4E analysis and thermodynamic optimization of flaring associated gas recovery using external firing recuperative gas turbine
Mahmood Farzaneh-Gord
2022-8
A modified exergy evaluation of using carbon-black/water/EG nanofluids as coolant of photovoltaic modules
Mohammad Passandideh-Fard
2022-8
A whole-thermoplastic microfluidic chip with integrated on-chip micropump, bioreactor and oxygenator for cell culture applications
Mohammad Passandideh-Fard
2022-8
Clinical implementation of a bionic hand controlled with kineticomyographic signals
Alireza Akbarzadeh Tootoonchi
2022-8
Influences of twisted turbulators arrangements on heat transfer and airflow resistance over absorber plate of solar air heater
Javad Abolfazli Esfahani
2022-8
Analytical approximate solution of fractional order smoking epidemic model
Mohammad Hatami
2022-9
A novel transient-adaptive subcell algorithm with a hybrid application of different collision techniques in direct simulation Monte Carlo (DSMC)
Ehsan Roohi
2022-9
Behavior of concentrically braced steel frames under re loading
Mohammad Moghiman
2022-9
Comparison study of vertical and horizontal elastic wall on vented square enclosure filled by nanofluid and hexagonal shape with MHD effect
Mohammad Hatami
2022-9
Effect of double rotating cylinders on the MHD mixed convection and entropy generation of a 3D cubic enclosure filled by nano-PCM
Mohammad Hatami
2022-9
MHD Casson carbon nanotube flow with mass and heat transfer under thermosolutal Marangoni convection in a porous medium: analytical solution
Mohammad Hatami
2022-9
Numerical analysis of wind turbines blade in deep dynamic stall
Javad Abolfazli Esfahani
2022-9
Numerical study of heat transfer and fluid flow of supercritical water in twisted spiral tubes
Ali Esmaeili
2022-9
Performance analysis of a micro-scale integrated hydrogen production system by analytical approach, machine learning, and response surface methodology
Javad Abolfazli Esfahani
2022-9
A comparative study to critically assess the designing criteria for selecting an optimal adsorption heat exchanger in cooling applications
Hamid Niazmand
2022-10
A Conceptual and Straightforward Approach for Solving the Closed-form Direct Kinematics of a General Coplanar 6-PUS Parallel Manipulator
Alireza Akbarzadeh Tootoonchi
2022-10
Energy, exergy, and entropy generation analyses of a water-based photovoltaic thermal system, equipped with clockwise counter-clockwise twisted tapes: An indoor experimental study
Ali Kianifar
2022-10
Evaluating the dynamic behaviour of wind-powered compression refrigeration cycle integrated with an ice storage tank for air conditioning application
Mahmood Farzaneh-Gord,Ali Kianifar
2022-10
Experimental characterization of a solar still integrated with a spiral collector using energy, exergy, economic, and environmental (4E) analyses
Mohammad Passandideh-Fard
2022-10
Non‑classical thermal shock analysis of cracked functionally graded media
Mahmoud Shariati
2022-10
On the effects of NH3 addition to a reacting mixture of H2/CH4 under MILD combustion regime: Numerical modeling with a modified EDC combustion model
Javad Abolfazli Esfahani
2022-10
Parameter study of a porous solar-based propane steam reformer using computational fluid dynamics and response surface methodology
Javad Abolfazli Esfahani
2022-10
Scavenging energy from aeroelastic vibrations for hybrid stall control in a fixed-wing micro aerial vehicle
Ali Esmaeili
2022-10
Suppressing vibration of structures using nonlinear single unit impact dampers via Taguchi method
Aref Afsharfard
2022-10
Ammonia decomposition in a porous catalytic reactor to enable hydrogen storage: Numerical simulation, machine learning, and response surface methodology
Javad Abolfazli Esfahani
2022-11
Analytical modeling of variable thickness cylindrical shallow shells using extended Kantorovich method
Hamid Moeenfard
2022-11
Assistive Control of a Hip Exoskeleton Robot using a DQN-Adjusted Delayed Output Feedback Method
Iman Kardan,Alireza Akbarzadeh Tootoonchi
2022-11
Design of vibro-impact electromagnetic ocean-wave energy harvesting system; an experimental study
Aref Afsharfard
2022-11
Identification of frequency modes and spectral content for noise suppression: Cavitation flow over 3-D hydrofoil with sinusoidal leading edge
Ehsan Roohi
2022-11
Mechanical and failure analysis of thick composites under hygrothermal conditions by a novel coupled hygro-thermo-mechanical multiscale algorithm
Ali Reza Fathi
2022-11
On the rarefied thermally-driven flows in cavities and bends
Ehsan Roohi
2022-11
The Hydrodynamic Challenge of Initial to Sheet/Cloud Cavitating Flow Around ClarkY11.7% Hydrofoil Using Recent Turbulence and Cavitation Models
Mahmoud Pasandidehfard
2022-11
Thermal energy storage using nano phase change materials in corrugated plates heat exchangers with different geometries
Mohammad Hatami
2022-11
Thermal performance prediction of a phase change material based heat-sink cooling system for a printed circuit board, using response surface method
Mohammad Javad Maghrebi
2022-11
Bandgap characteristics of a piezoelectric phononic crystal Timoshenko nanobeam based on the modified couple stress and surface energy theories
Mohammad Hossein Abolbashari
2022-12
Cooling enhancement of portable computers processor by a heat pipe assisted with phase change materials
Mohammad Passandideh-Fard
2022-12
Effect of air humidity on premixed combustion of ammonia/air under engine relevant conditions: numerical investigation
Javad Abolfazli Esfahani
2022-12
Environmental, economical, and machinability based sustainability assessment in hybrid machining process employing tool textures and solid lubricant
Sadegh Elhami
2022-12
Experimental investigation and optimization of low-frequency vibration-assisted drilling
Amir Ghandehariun,Aref Afsharfard
2022-12
Experimental performance evaluation of a novel design solar desalination device equipped with air stones
Hossein Ajam
2022-12
Molecular Dynamics Study of Interdiffusion for Cubic and Hexagonal SiC/Al Interfaces
Masoud Tahani
2022-12
Numerical simulation of nucleating flow and shock capturing in steam turbines by a simple low-dissipation upwind scheme using an Eulerian-Lagrangian model
Mohammad Reza Mahpeykar,Mahmoud Pasandidehfard
2022-12
The impacts of shape factor and heat transfer on two-phase flow of nano and hybrid nanofluid in a saturated porous medium
Mohammad Hatami
2022-12
Transient flow and heat transfer from a rotating sphere around its vertical axis floating in a stationary fluid
Asgar Bradaran Rahimi
2022-12
A comprehensive review on micro- and nano-scale gas flow effects: Slip-jump phenomena, Knudsen paradox, thermally-driven flows, and Knudsen pumps
Ehsan Roohi
2023-1
A highly efficient and sustainable photoabsorber in solar-driven seawater desalination and wastewater purification
2023-1
Coupled thermal stability analysis of piezomagnetic nano-sensors and nano-actuators considering the flexomagnetic effect
Masoud Tahani
2023-1
Effect of Vacancy Defect Content on the Interdiffusion of Cubic and Hexagonal SiC/Al Interfaces: A Molecular Dynamics Study
Masoud Tahani
2023-1
Experimental and numerical analysis of ratcheting behavior of A234 WPB steel elbow joints including corrosion defects
Mahmoud Shariati
2023-1
Experimental and numerical study of free surface effect on the ventilated cavitating flow around a surface vehicle model
Mahmoud Pasandidehfard
2023-1
Experimental investigation of effective parameters on productivity improvement of the EDM process for corrosion-resistant metals
Amir Ghandehariun
2023-1
Experimental investigation of minimum total irreversibility in non-premixed combustion of different multi-branch burners by Taguchi analysis
Hossein Ajam,Mohsen Ghazikhani
2023-1
Hybrid CFD-ANN approach for evaluation of bio-inspired dolphins dorsal fin turbulators of heat exchanger in turbulent flow
Javad Abolfazli Esfahani
2023-1
Hydro-optic interaction study on submerged unmanned underwater vehicles regarding to Snell's window
Ali Esmaeili
2023-1
Increasing vortex-induced vibration-based energy harvesting using a nature-inspired bluff body: An experimental study
Aref Afsharfard,Javad Abolfazli Esfahani
2023-1
Investigation of the Damping Performance of a Shape Memory Alloy Beam
Ali Reza Fathi
2023-1
Numerical Study of Gas Flow in Super Nanoporous Materials Using the Direct Simulation Monte-Carlo Method
Ehsan Roohi
2023-1
Simulation of interfacial deformations for 2D axisymmetric multi-material flows
Mohammad Passandideh-Fard
2023-1
A modified strain gradient beam constraint model
Hamid Moeenfard
2023-2
An experimental study integrated with prediction using deep learning method for active/passive cooling of a modified heat sink
Mohammad Passandideh-Fard
2023-2
Efficient photothermal catalytic hydrogen production via plasma-induced photothermal effect of Cu/TiO2 nanoparticles
Mohammad Hatami
2023-2
Experimental and numerical investigation of transient starting of pre-evacuated exhaust diffuser in high altitude ground test
Mahmoud Pasandidehfard
2023-2
Fatigue life evaluation of Al-GFRP bonded lap joints under four-point bending using strain-life criteria
Abdolrahman Jaamialahmadi
2023-2
Ground effect on the aerodynamics of a flapping wing in forward flight: an experimental study
Mohammad Hassan Djavareshkian
2023-2
Numerical study of the effect of winglet on the aerodynamic performance of sinusoidal and simple leading-edge wings
Mohammad Hassan Djavareshkian
2023-2
Synergistic effect of active-passive methods using fins surface roughness and fluid flow for improving cooling performance of heat sink heat pipes
Mohammad Passandideh-Fard
2023-2
The effects of diesel-OME1 blended fuel on combustion characteristics of a heavy-duty compression ignition engine by a numerical study
Mohammad Hatami
2023-2
An isogeometric degenerated shell formulation for geometrically nonlinear analysis of smart laminated shells
Behrooz Hassani
2023-3
Combustion regime identification and characteristics of nitrogen-diluted ammonia with hot air oxidizer: Non-premixed counterflow flame
Javad Abolfazli Esfahani
2023-3
Experimental study of the effect of HHO gas injection on pollutants produced by a diesel engine at idle speed
Mohammad Moghiman
2023-3
Optimization of the surface heating for a stationary cascade turbine blade in wet steam flow
Ali Reza Teymourtash
2023-3
Using internal sinusoidal fins and phase change material for performance enhancement of thermal energy storage systems: Heat transfer and entropy generation analyses
Mahmood Farzaneh-Gord
2023-3
Yearly Energy, Exergy, and Environmental (3E) Analyses of A Photovoltaic Thermal Moduleand Solar Thermal Collector in Series
Mohammad Moghiman
2023-3
Flow and Heat Transfer from Rotating Horizontal Cylinder Floating in Stationary Fluid
Asgar Bradaran Rahimi
2023-4
Thumb carpometacarpal joint reaction force during distraction: a cadaveric study
Alireza Akbarzadeh Tootoonchi
2023-4
Assist-As-Needed Control of a Hip Exoskeleton, Using Central Pattern Generators in a Stride Management Strategy
Alireza Akbarzadeh Tootoonchi,Iman Kardan
2023-4
Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictions
Masoud Tahani
2023-4
Bidirectional hyperelastic characterization of brain white matter tissue
Seyed Abdolmajid Yousefsani
2023-4
Calculation of the phase separation rate in two‐phase flow of non‐Newtonian power‐law fluid and gas bubbles flowing inside the T‐ and Y‐junctions using random vortex method (RVM)
Ali Reza Teymourtash
2023-4
Experimental and numerical investigation of ratcheting behavior in seamless carbon steel 90◦ elbow pipe with small dimensions under constant internal pressure and in-plane cyclic bending
Mahmoud Shariati
2023-4
Experimental study on the tensile load-carrying capacity of steel/GFRP bonding in moisture and acidic environments at high temperature
Mehran Kadkhodayan
2023-4
Modifying Vibratory Behavior of the Car Seat to Decrease the Neck Injury
Aref Afsharfard
2023-4
Multi-objective optimization of a tubular heat exchanger enhanced with delta winglet vortex generator and nanofluid using a hybrid CFD-SVR method
Javad Abolfazli Esfahani
2023-4
Natural and synthetic superhydrophobic surfaces: A review of the fundamentals, structures, and applications
Javad Abolfazli Esfahani
2023-4
Adaptive fuzzy impedance control of exoskeleton robots with electromyography-based convolutional neural networks for human intended trajectory estimation
Alireza Akbarzadeh Tootoonchi
2023-5
Application of simulated annealing algorithm for multi criteria operation planning in flexible manufacturing systems
Farhad Kolahan
2023-5
Effect of hydrogen concentration on the stabilization of premixed ammonia/hydrogen flames in a heated micro-combustor: numerical investigation
Javad Abolfazli Esfahani
2023-5
Harvesting energy using simultaneous rotational and translational motions of a breakwater
Aref Afsharfard,Masoud Tahani
2023-5
International Journal of Pressure Vessels and Piping 205 (2023) 104996 Available online 24 June 2023 0308-0161/© 2023 Elsevier Ltd. All rights reserved.Experimental and numerical investigation of ratcheting behavior of SS316L seamless straight pipe under cyclic internal pressure and in-plane cyclic bending
Mahmoud Shariati
2023-5
Predicting entropy generation of a hybrid nanofluid in microchannel heat sink with porous fins integrated with high concentration photovoltaic module using artificial neural networks
Mohammad Passandideh-Fard,Ali Reza Teymourtash
2023-5
Study on the double-pass electrochemical discharge machining process
Sadegh Elhami
2023-5
Unsteady aerodynamics of flapping bionic eagle wings in forward flight: An experimental and numerical study
Mohammad Hassan Djavareshkian
2023-5
شناسایی یک مدل تعمیم یافته پرنتل-ایشلینسکی برای یک سکوی موقعیت دهی میکرونی با عملگرهای آلیاژ حافظ شکل
Ali Reza Fathi
2023-5
A numerical study on mitigation of sloshing in a rectangular tank using floating foams
Mohammad Passandideh-Fard
2023-6
A Phenomenological Study of Chromium Impurity Effects on Lattice Microstrains of SnO2 Nanoparticles Prepared Using Sol–Gel Technique
Masoud Tahani
2023-6
Comparative analysis of thermal damage to laser-irradiated breast tumor based on Fourier conduction and non-Fourier heat conduction models: A numerical study
Mohammad Bagher Ayani
2023-6
Diffusion and Interdiffusion Study at Al- and O-Terminated Al2O3/AlSi12 Interface Using Molecular Dynamics Simulations
Masoud Tahani
2023-6
Effect of different aero-structural optimization in the commercial airplane
Ali Esmaeili
2023-6
Starting transient analysis of second throat exhaust diffuser in high-altitude test of a thrust optimized parabolic nozzle
Mahmoud Pasandidehfard
2023-6
Synergistic effect of Fe3O4 nanoparticles and Au nanolayer in enhancement of interfacial solar steam generation
Hamid Niazmand
2023-6
Synthesis and post-heat treatment of complex compositions in Cu-Ti-O system: Phase investigation and optical properties
Hamid Niazmand
2023-6
Heat transfer and deposition analysis of CuO-Water nanofluid inside a baffled channel: Two-phase Eulerian–Lagrangian method
Mohammad Bagher Ayani
2023-7
Inversion in Binary Gas Mixtures in Rarefied Flow Conditions: Direct Simulation Monte Carlo Solution and Comparison with the Analytical Solutions at Free Molecular Regime
Ehsan Roohi
2023-7
On the effects of hybrid surface wettability on the structure of cavitating flow using implicit large eddy simulation
Ehsan Roohi
2023-7
Optimization of Acoustic Performance of EPDM-based Foams Using Taguchi Design of Experiments: The Appropriate Content of Additives
Hamid Moeenfard
2023-7
Source of buzz instability in a supersonic air inlet
Javad Sepahi-Younsi
2023-7
3D Numerical investigation of flow and heat transfer from an immersed vertical cylinder with the constant rotation speed in an unbounded stationary fluid
Asgar Bradaran Rahimi
2023-8
ANN-based procedure to obtain the optimal design and operation of the compression chiller network – Energy, economic and environmental analysis
Mahmood Farzaneh-Gord
2023-8
Energy, exergy, and economic (3E) analyses of nanoparticle-enriched phase change material in an air–PCM heat exchanger applied for buildings free cooling
Ali Kianifar
2023-8
Experimental and comprehensive investigation of second throat diffuser area effect on ground test of a thrust optimized parabolic nozzle with different expansion ratios
Mahmoud Pasandidehfard
2023-8
High Heat-Flux Removal From Topside-Cooled GaN Power Devices by Water-Jet Impingement Using 3-D-Printed Nozzles
Mohammad Passandideh-Fard
2023-8
Improving Thermal Management of CPU by Surface Roughening of Heat Sinks
Mohammad Passandideh-Fard
2023-8
Investigation of Natural Convection and Entropy Generation in a Porous Titled Z-Staggered Cavity Saturated by TiO2-Water Nanofluid
Mohammad Hatami
2023-8
Solar-thermal conversion and thermal energy storage of different phase change materials
- -,Ali Kianifar
2023-8
Unsteady characteristic study on the flapping wing with the corrugated trailing edge and slotted wingtip
Mohammad Hassan Djavareshkian
2023-8
4E and Multi-criteria Optimization of a New Alternative Intercooling Method for Modified Brayton Cycle on the Operation of a Hybrid Energy System
Mahmood Farzaneh-Gord
2023-9
A new numerical method for elastic-plastic plate analysis: Theoretical-experimental validation and its application in ratcheting phenomenon
Mehran Kadkhodayan
2023-9
Combined passive and active flow control for fixed-wing micro air vehicles
Ali Esmaeili
2023-9
Combustion, emission and radiative performance of diffusion flame: effect of graphene nanoparticles
Mohammad Moghiman
2023-9
Computational study of multiphase flow in cement plant gas conditioning towers: a review
Javad Sepahi-Younsi
2023-9
Effect of Inter-Cavity Spacing and Heat Treatment in Friction Stir Processing/Welding (FSP/FSW) Al7075 Composites Containing Al2O3 and Graphene Nanomaterials using Charpy Impact Test
Mahmoud Shariati
2023-9
Influence of Siliconized Zn-Graphene Oxide Complex Nanoparticles on the Microstructure and Mechanical Properties of AA5083: Focus on Gas Metal Arc Welding
Farhad Kolahan
2023-9
Investigating the Influence of Diffusion on the Cohesive Zone Model of the SiC/Al Composite Interface
Masoud Tahani
2023-9
Leading Edge Radius Effects on VAWT Performance
Mohammad Javad Maghrebi
2023-9
Numerical Study of Geometrical Properties of Full-Span Tubercle Leading Edge Wing at Post-Stall Condition
Ali Esmaeili
2023-9
Parametric study and optimization of pillow-plate heat exchanger using multi-objective genetic algorithm and entropy generation minimization approaches
Mahmood Farzaneh-Gord
2023-9
Significance of Aviation Safety Its Evaluation and Ways to Strengthen Security
Mohammad Hassan Djavareshkian
2023-9
Study Effects of the Floater Geometry on the Output Power of Ocean Wave Energy Harvesters
Aref Afsharfard
2023-9
The Developed Conservation Element and Solution Element Method in Two-Dimensional Spherical Coordinate and Its Application to the Analysis of Non-Fourier Heat Conduction
Mohammad Bagher Ayani
2023-9
A quasi-steady numerical modeling of wake capture for a hovering flapping wing
Mohammad Hassan Djavareshkian
2023-10
Advancing high-speed flow simulations: SAUSM – an innovative hybrid numerical scheme for shock stability and accuracy
Mohammad Hassan Djavareshkian
2023-10
Investigation of Microstructure and Wear Properties of Stellite 6 Laser Additive Manufactured Layers on Martensitic Stainless Steel Substrate
Mohammad Hossein Farshidianfar
2023-10
Modified advection upstream splitting method: Revolutionizing accuracy and convergence speed in low-Mach flows
Mohammad Hassan Djavareshkian
2023-10
Optimization of the target pressure distribution and inverse design of an axial turbine blade
Javad Sepahi-Younsi
2023-10
Parameters Identification of a Generalized Prandtl-Ishlinskii Model for a Micro-Positioning Stage Using Mutual Shape Memory Alloy Actuators
Ali Reza Fathi
2023-10
Techno-economic assessment of a proposed novel hybrid system for natural gas pressure reduction stations
Mahmood Farzaneh-Gord
2023-10
The second clinical study investigating the surgical method for the kineticomyographic control implementation of the bionic hand
Alireza Akbarzadeh Tootoonchi
2023-10
A MECHANO-BIOLOGICAL STUDY COMPARING EXTERNAL FIXATION USING MONOCORTICAL AND BICORTICAL PINS IN TIBIAL DIAPHYSEAL FRACTURE MODELS: A FINITE ELEMENT ANALYSIS
Masoud Tahani
2023-11
Coupled dynamic and thermal simulation of airfoil flap movement in turbulent flow using the lattice Boltzmann method
Mohammad Hassan Djavareshkian
2023-11
Design and Analysis of Supersonic Inlet for Ramjet Engines: Aerodynamic Considerations and Performance Optimization
Mohammad Hassan Djavareshkian
2023-11
Evaluation of generalized k-ω turbulence model in strong separated flow estimation of thrust optimized parabolic nozzle
Mahmoud Pasandidehfard
2023-11
Investigating the interaction parameters on ventilation supercavitation phenomena: Experimental and numerical analysis with machine learning interpretation
Mahmoud Pasandidehfard
2023-11
Performance prediction and optimization of a hybrid renewable-energy-based multigeneration system using machine learning
Amir Ghandehariun
2023-11
Triple-objective MPSO of zeotropic-fluid solar ejector cycle integrated with cold storage tank based on techno-economic criteria
Mahmood Farzaneh-Gord,Ali Kianifar
2023-11
A hybrid study of a 4-stage compressed solar distiller based on experimental, computational and deep learning methods
Ali Kianifar
2023-12
Corrosion-fatigue resistance of ultrafine grain commercially pure titanium in simulated body fluid
Mahmoud Shariati,Mehran Kadkhodayan
2023-12
Experimental study of passive cooling techniques in an oil-immersed transformer building
Hamid Niazmand
2023-12
Fatigue life simulation of AA7075-T651 FSW joints using experimental data
Farhad Kolahan
2023-12
Investigating the influence of piezoelectric excitation on the veering phenomenon associated with electrostatically coupled micro-beams
Masoud Tahani
2023-12
Investigation of Hardness, Microstructure, and Process Temperature in the Internal Gear Flow-Forming Process
Farhad Kolahan
2023-12
Large Eddy Simulations of Cavitation around a Pitching-Plunging Hydrofoil
Ehsan Roohi
2023-12
Maintenance Grouping Optimization with Air Systems to Improve Risk Management
Mohammad Hassan Djavareshkian
2023-12
Mathematical modelling and experimental study of a novel planar micro-positioning stage using shape memory alloy actuators
Ali Reza Fathi
2023-12
Mode-I and II fracture behavior of metal-to-composite bonded interfaces with a graphene nanoplatelet-reinforced structural epoxy adhesive
Mahmoud Shariati
2023-12
Modeling the Formation of Thermal Spray Coatings on Substrates with Arbitrary Shapes
Mohammad Passandideh-Fard
2023-12
NUMERICAL SIMULATIONS ON VISIBILITY AND TEMPERATURE IN A CAR PARK OF A COMMERCIAL BUILDING
Mohammad Moghiman
2023-12
On enhancement of heat transfer from a spiral heater using ultrasonic waves: experiments and simulations
Mohammad Passandideh-Fard
2023-12
Predictive machine learning models for optimization of direct solar steam generation
Hamid Niazmand
2023-12
Two-dimensional modelling of free-surface flows in presence of a spherical object using the Modified Volume of Fluid technique
Mohammad Passandideh-Fard
2023-12
Aerodynamic Assessment of a Control Strategy Based on Twist Morphing Wing in a Flying Wing Aircraft
Mohammad Hassan Djavareshkian
2024-1
Enhancing convergence and accuracy: A comparative study of preconditioning for steady, laminar, and high gradient flows over a wide range of Mach numbers
Mohammad Hassan Djavareshkian
2024-1
Large Eddy Simulation of Cavitating Flow around a Pitching Hydrofoil
Ehsan Roohi
2024-1
Methods and Technologies for Supporting Knowledge Sharing within Learning Communities: A Systematic Literature Review
Ali Esmaeili
2024-1
Numerical Investigation of Lucid Spherical Cross-Axis Flow Turbine with Asymmetric Airfoil Sections and the Effect of Different Parameters of Blades on Its Performance
Mahmoud Pasandidehfard
2024-1
Numerical Modeling and Simulation of Parking in a Commercial Building
Mohammad Moghiman
2024-1
Numerical Simulation and Performance Analysis of Multi-Stage Electroosmotic Micropumps
Hamid Niazmand
2024-1
Prediction of weld bead geometry of AA5083 using taguchi technique: in the presence of siliconized zn-graphene oxide complex nanoparticles
Farhad Kolahan
2024-1
Aerodynamic Modification of High-Rise Buildings by the Adjoint Method
Ali Esmaeili
2024-2
Kriging and Radial Basis Function Models for Optimized Design of UAV Wing Fences to Reduce Rolling Moment
Mohammad Hassan Djavareshkian
2024-2
A Comprehensive Study of Al2O3 Mechanical Behavior Using Density Functional Theory and Molecular Dynamics
Masoud Tahani
2024-3
Buckling and post-buckling analysis of double-layer magnetoelectric nano-plate strips considering piezo-flexoelectric and piezo-flexomagnetic effects
Masoud Tahani
2024-3
Compact electromagnetic vibration suppressor and energy harvester; an experimental study
Aref Afsharfard
2024-3
Contribution of Soft Tissue Passive Forces in Thumb Carpometacarpal Joint Distraction
Seyed Abdolmajid Yousefsani,Alireza Akbarzadeh Tootoonchi
2024-3
Effect of heat treatment on microstructure and wear properties of laser additively manufactured 316 L stainless steel/Co-Cr-W alloy part using directed energy deposition method
Mohammad Hossein Farshidianfar
2024-3
Enhancing accuracy and efficiency: A novel implicit–explicit approach for fluid dynamics simulation
Mohammad Hassan Djavareshkian
2024-3
Influence of temperature on the elastic properties of graphene and graphene-like nanosheets based on the asymptotic homogenization method
Masoud Tahani
2024-3
Symmetrized generalized and simplified bernoulli-trials collision schemes in DSMC
Ehsan Roohi
2024-3
Thermal analysis of hybrid nanofluids inside a microchannel heat exchanger for electronic cooling
Hamid Niazmand
2024-3
A Proposal of a Design for the Bionic Hand: Describing the Integration, Motor Controlling System, Stereognosis, and Proprioception Sensory Feedback Components
Alireza Akbarzadeh Tootoonchi
2024-4
Optimal design and operation of the hybrid absorption-compression chiller plants - Energy and economic analysis
Mahmood Farzaneh-Gord
2024-4
Vibration analysis of multi-span continuous beam bridges with unequal spans subjected to moving loads
Behrooz Hassani
2024-4
Development of GDDR method for ratcheting analysis of moderately thick plates
Mehran Kadkhodayan
2024-5
Dynamic analysis and multi-objective optimization of solar and hydrogen energy-based systems for residential applications: A review
Amir Ghandehariun
2024-5
Effect of the arrangement of the injectors on the flow quantities in water injection into the hot supersonic crossflow inside the cylinder
Mahmoud Pasandidehfard
2024-5
Investigating Mechanical Response and Structural Integrity of Tubercle Leading Edge under Static Loads
Ali Esmaeili
2024-5
On the performance of a latent heat thermal storage unit integrated with a helically coiled copper tube and organic phase change materials: A lab-scale experimental study
Mohammad Passandideh-Fard
2024-5
Computational Fluid Dynamic Application In Patients Suffering From Nasal Obstruction Due To Septal Deviation; A Review Article
Asgar Bradaran Rahimi
2024-6
Analyzing the influence of dimensions of the body behind the cavitator on ventilated cavitation
Mahmoud Pasandidehfard
2024-6
Complementary assessment and design optimization of a hybrid renewable energy system integrated with open-loop pumped hydro energy storage
Amir Ghandehariun
2024-6
Introducing a novel piezoelectric-based tunable design for mode-localized mass micro-sensors
Masoud Tahani
2024-6
Investigation of cancellation and maximum of resonance in multi-span railway beam bridges with unequal lengths under moving loads
Behrooz Hassani
2024-6
Optimization of penetration depth in submerged arc welding using genetic algorithm
Farhad Kolahan
2024-6
Prediction of drill penetration rate in drilling oil wells using mathematical and neurofuzzy modeling methods
Ali Akbar Akbari
2024-6
The Unnoticed Issue of Coercive Citation Behavior for Authors
Mohammad Moghiman
2024-6
The Use of Grey-Taguchi based Approach for Modeling and Heuristic Algorithm-based Method for Optimization of Flux Assisted TIG Welding Process
Farhad Kolahan
2024-6
بررسی اثر چیدمانهای متفاوت تیر پیزوالکتریک در برداشت انرژی از ارتعاشات گردابهای حول سیلندر دایرهای
Ali Esmaeili
2024-6
Effect of Diffusion on the Ultimate Axial Load of Complex-Shaped Al-SiC Samples: A Molecular Dynamics Study
Masoud Tahani
2024-7
Eliminating enclosed voids in simultaneous optimization of topology and bi-material distribution of three-dimensional structures for additive manufacturing
Mohammad Hossein Abolbashari,Behrooz Hassani
2024-7
Enhancing thermal-hydraulic performance in curved pipes through optimal radial fin placement: A numerical investigation
Mohammad Javad Maghrebi
2024-7
Investigating the relationship between natural frequency and residual strength and stiffness of cross‐ply laminate under cyclic loading
Jalil Rezaee Pazhand
2024-7
Optimizing Performance Through Retrofitting: Strategies for Effectiveness Defence and Resiliency to Enhance Safety and Reliability
Ali Esmaeili
2024-7
Analyzing weld bead geometry and microstructure in ultrasonic-assisted activated flux TIG welding of ST37 steel
Farhad Kolahan,Sadegh Elhami
2024-8
Experimental and numerical investigation of wicked heat pipe cooling efficacy in oil-immersed transformers
Hamid Niazmand
2024-8
The effect of using the hip exoskeleton assistive (HEXA) robot compared to conventional physiotherapy on clinical functional outcomes in stroke patients with hemiplegia: a pilot randomized controlled trial
Iman Kardan,Alireza Akbarzadeh Tootoonchi
2024-8
یاده سازی روش پسخور مستقیم سرعت با استفاده از عملگر دینامیکی فعال به منظور کاهش ارتعاشات ابزار داخل تراش
Behnam Moetakef Imani
2024-8
Strategies, Methods, and Supports for Developing Skills within Learning Communities: A Systematic Review of the Literature
Ali Esmaeili
2024-9
Experimental and numerical analysis of cavitator angle effects on artificial cavitation characteristics under low ventilation coefficients, with prediction using optimized random forest and extreme gradient boosting models
Mahmoud Pasandidehfard
2024-10
Experimental and numerical studies on the flank wear during the thread milling; Effect of infeed strategies in different cutting speeds
Sadegh Elhami
2024-10
Innovative optimization of parabolic cavitators: Improving hydrodynamic efficiency and supercavity qualitycavitatio
Mahmoud Pasandidehfard
2024-10
Mathematical Modelling of In Vitro Cinnamaldehyde Controlled Release via Computational Fluid Dynamic
Javad Abolfazli Esfahani
2024-10
Synergizing theory and experiment: Enhancing solar distillation performance with external reflector in a passive 4-stage model
Ali Kianifar
2024-10
A quick 3D BEM iterative algorithm for partially cavitating flows over cylindrical bodies at angles of attack
Mahmoud Pasandidehfard
2024-11
Improvement of mixing efficiency in twisted micromixers: The impact of cross-sectional shape and eccentricity ratio
Hamid Niazmand
2024-11
Geometrical parameters effect on aerodynamic performance of infinite tubercle leading edge wings
Ali Esmaeili
2024-12
Sensitivity analysis of geometrical parameters of supercritical water in twisted spiral tubes
Ali Esmaeili
2024-12