| Thesis Title | Student | Section | Supervisor | Defined date of defense |
|---|---|---|---|---|
| Section | Supervisor | |||
| Investigation of flow and heat transfer between two concentric cylinder with constant magnetic field | Bradaran Rahimi | 0000-00-00 | ||
| Experimental and numerical study of Curing and injection Processes of Rubber | mohammad Reza Erfanian | M.Sc. | Moghiman | 2011-10-17 |
| Experimental analysis of air flow over two tandem cylinders with different diameters | Ali Ataei Hashempour | M.Sc. | Pasandidehfard | 2011-01-10 |
| FEM simulation of FSW to predict residual stresses and fracture parameters | Hashem Roodi | M.Sc. | Hadidi Moud | 2011-03-07 |
| Axisymmetric Stagnation—Point Flow and Heat Transfer of a Viscous Fluid on a moving Plate with Time-Dependent Axial Velocity and Uniform Transpiration | Mohammad Jafari | M.Sc. | Bradaran Rahimi | 2010-10-12 |
| Evaluation of the effect of impinging jet cross section geometery on heat transfer enhancement on a targeting flat plate | seyedeh sahar mostaghim | M.Sc. | Kahrom | 2012-05-21 |
| Stagnation flow and heat transfer on cylinder with considering compressibility of fluid | hamid mohammadiun | P.H.D. | Bradaran Rahimi | 2011-09-04 |
| investigation of residual stress effect on ductile crack propagation in gas pipeline steel | Mojtaba Behnam nik | M.Sc. | Hadidi Moud | 2011-05-15 |
| Numerical Simulation of Tandem Projectiles With Different Velocities | mahdiyeh kanani | M.Sc. | Pasandidehfard | 2009-06-22 |
| modelling crack propagation in adhessively bonded structures | HAMED ALIDOOST | M.Sc. | Hadidi Moud | 2010-11-29 |
| Evaluation of the effect of \"autofrettage\" and \"shrinkfit\" on the performance of pressurised thick walled vessels containing partial cracks | hossein yaghoobi | M.Sc. | Hadidi Moud | 2011-02-04 |
| Investigation of local approach to cleavage fracture-microstructure and statistical results | IMAN BADIZADEH | M.Sc. | Hadidi Moud | 2010-10-02 |
| Optimization of Tuned Mass Dampers for Earthquake Vibration Mitigation of High-rise Structures including Soil-Structure Interaction | P.H.D. | Farshidianfar | 2011-10-22 | |
| Heat transfer enhancement in a tube with coiled wire inserts | Ahmad Sharaf Baygi | M.Sc. | Moghiman | 2011-05-30 |
| Thermo-Fluid Analysis in a Cascade of Turbine Blades | mahdad tavassoli | M.Sc. | Teymourtash | 2012-02-27 |
| SImulation of combustion of gasoline-ethanol in SI engine for prediction of performance and emission and evaluation with experimental results | mohammadreza zangooeemotlagh | P.H.D. | Modarres Razavi | 2012-02-29 |
| Investigations on application of Acoustic Emissions for in-process detection of workpiece burn or crack on conventional grinding machines | Kambiz Imani Khani | M.Sc. | Akbari | 2012-03-01 |
| Dynamic modelling of snake-like robot in rectilinear gait (single wave propagation) | majid behboodi | M.Sc. | Akbarzadeh Tootoonchi | 2012-06-11 |
| Design of a variable wing micro Unmanned Aerial Vehicle | Mohammad MohammadAmini | M.Sc. | Rezaee Pazhand | 2011-12-12 |
| Application of local approaches to ductile and cleavage fracture of 7075 aluminum alloy | Farhad Hosseini | M.Sc. | Hadidi Moud | 2012-06-11 |
| Numerical Modeling of Bubble Dynamics around Light Absorptive Nanoparticles in Acoustic Stress Field | Amir Ebrahimi | P.H.D. | Ayani | 2012-10-31 |
| Investigating the Behavior of Nonlinear Impact Dampers Based on Acoustic and Reliability | Aref Afsharfard | P.H.D. | Farshidianfar | 2012-06-09 |
| Optimization of Non-traditional Dynamic Vibration Absorber on Continuous Structures | Behshad Noori | M.Sc. | Farshidianfar | 2013-01-28 |
| Shape Optimization of Turbine Blades Using Taguchi Method | mehdi ghasemi giw | M.Sc. | Abolbashari | 2014-06-09 |
| Deformation Mechanic of Functionally Graded Thermoelastic-Plastic Circular Plates | Mohammad Bagheriasl | M.Sc. | Kadkhodayan | 2012-06-11 |
| Numerical Simulation of Internal Flow in Pressure-Swirl Atomizers and Investigation on Effects of Swirl Nozzle on Atomization Characteristics | Masoud Yazdimamaghani | M.Sc. | Modarres Razavi | 2012-09-02 |
| Plastic deformation due to activation of slip systems in multi-crystal alloy under quasi-static loading at room temperature. | Elnaz Naghel | M.Sc. | Hadidi Moud | 2013-01-28 |
| measuring and modelling the performance and efficiency of cyclone seperators in water supply systems | Effat Salehi Far | M.Sc. | Moghiman | 2011-12-12 |
| induced thermal residual stresses fields in standard fracture test specimen and its influence on fracture resistance | seyed mohsen sharifi hosseini | M.Sc. | Hadidi Moud | 2013-04-22 |
| Numerical study of dynamic stall phenomenon on picthing motian in low Reynolds number | Mojtaba Honarmand | M.Sc. | Djavareshkian | 2013-06-25 |
| Exergy Analysis on the Domestic Refrigerator and study subcooling effects | javad javidan mehr | M.Sc. | Ghazikhani | 2012-08-27 |
| Effect of cold expansion process parameters in aluminum alloy 7000 series on field residual stresses and capability servicing in this alloy | amin rahimi sadegh | M.Sc. | Hadidi Moud | 2013-06-17 |
| review of shot peening process of titanium alloy surfaces and the influence of process parameters on the residual stress fields | Ali Mashkour | M.Sc. | Hadidi Moud | 2013-06-17 |
| Analytical investigation of normal shock in properties of two-phase flow into a laval nozzle | Hassan Assadzadeh | M.Sc. | Teymourtash | 2013-06-25 |
| Experimental investigation of non dimensional parameters effects on heat transfer and drag coefficients of flat plate with rectangular cylinders | Ghodrat Ghassabi | P.H.D. | Kahrom | 2013-09-14 |
| Predicting fatigue crack growth for cold expanded holes (in steel and Aluminum alloy plates) | poria sadeghi | M.Sc. | Hadidi Moud | 2013-09-16 |
| Three-dimensional simulation of plunging oscillating wing movment with the OpenFOAM software. | amir bagheri | M.Sc. | Djavareshkian | 2013-10-07 |
| Experimental study on a hybrid Exposure Solar Cooker and comparison with a double exposure solar cooker | iman mortezaei | M.Sc. | Kianifar | 2013-06-25 |
| Exergoeconomic optimization of solid oxide fuel cell-gas turbine cycle | Ali Servati | M.Sc. | Ajam | 2014-01-13 |
| Combined CCHP with Solar unit (S-CCHP) system optimization | Alireza Mohammadizadeh | M.Sc. | Ajam | 2014-01-13 |
| Multi-objective optimization of Tuned Mass Damper using Neural Network and Particle Swarm Optimization (PSO) Algorithm | mohammad eskandari | M.Sc. | Farshidianfar | 2014-01-20 |
| dynamic modeling and analysis of 3D snake like robots | Mohsen Malayjerdi | M.Sc. | Akbarzadeh Tootoonchi | 2014-04-19 |
| Analytical study of convection drying using Green\'s function | seyed mohammad vahidhosseini | M.Sc. | Abolfazli Esfahani | 2014-04-07 |
| General form of dynamic formulation for a 6-3 Gough-Stewart platform using Lagrangian method | Seyednaser Mostashiri | M.Sc. | Akbarzadeh Tootoonchi | 2014-04-19 |
| Status Survey and identification of Touss power plant boiler combustion air control system model to optimize the control parameters | Saeed Bafandegan Mojaver | M.Sc. | Moavenian | 2013-05-02 |
| Sectoral energy and exergy modeling of Iran and exergy analysis of absorption and compression refrigeration system | rashid seifalolamaee | M.Sc. | Abolfazli Esfahani | 2014-04-07 |
| Numerical investigation of effective parameters in a wind breaker of natural dry draft cooling tower | AMIR MAHAEI | M.Sc. | Djavareshkian | 2014-05-05 |
| Vortex Induced Vibrations Simulation and Methods of Controlling it | Zohreh Sirjani | M.Sc. | Farshidianfar | 2014-06-02 |
| Experimental study of the effect of aspect ratio rectangular obstacles on the coefficient of friction of flat plate | sina seyedzadeh | M.Sc. | Kahrom | 2013-12-16 |
| Numerical and Experimental Study of Proximity and Sequence Effect on Stagnation-Point and Wake Creator Plates | Pooria Ghorbanian Fard | M.Sc. | Kahrom | 2013-12-02 |
| numerical investigation of effective parameters for delaying dynamic stall on an oscillating airfoil with the torsional motion | Ramin Balouchzadeh | M.Sc. | Djavareshkian | 2014-10-27 |
| Determination of forming limit diagram in tube hydroforming process by using Marciniak-Kuczynski model | Reihaneh Abdollahi | M.Sc. | Jaamialahmadi | 2014-11-10 |
| Buckling and free vibration response of laminated corrugated core sandwich panels | Mohammad Hossein Shakib | P.H.D. | Rezaee Pazhand | 2015-03-11 |
| Vibration rsesponse of composite plates with SMA fiber | jafar broumand alipor | M.Sc. | Rezaee Pazhand | 2015-01-05 |
| Modeling the map of hot deformation of CU-Al2O3 nanocomposites using Artifical neural network models | Alireza Pustforushan | M.Sc. | Kadkhodayan | 2015-06-22 |
| Numerical and experimental investigation of solidification of incompressible viscous stagnation flow on a constant temperature substrate | Alireza Zamani Aghaie | P.H.D. | Bradaran Rahimi | 2015-07-22 |
| Analytical and experimental investigations of the fluid flow and heat transfer induced by rotating circular cylinders in a viscous fluid with different boundary conditions | Navid Freidoonimehr | P.H.D. | Bradaran Rahimi | 2015-07-22 |
| Geometrically nonlinear dynamic analysis of functionally graded axisymmetric thick hollow cylinders using MLPG method | seyed yaghoub sajadi | P.H.D. | Abolbashari | 2015-10-18 |
| Application of the Adomian Decomposition Method for vibration Analysis of Linear and Non-Linear Structures | Reza Ahrari | P.H.D. | Abolbashari | 2015-10-18 |
| Exergy analysis of combined SOFC fuel cell-microturbine special concerning on reformer to combustion chamber fuel mass ratio | Hadi Kargar | M.Sc. | Ghazikhani | 2015-10-05 |
| Experimental investigation of the effects of nanoparticles on the performance of pcm-air heat exchangers | Mahdi Kazemi | P.H.D. | Kianifar | 2016-04-20 |
| using EGR in dual fuel IDI engine and evaluation of its effect on pollutants and first & second law eficiency | Yoones Bayat | P.H.D. | Ghazikhani | 2016-05-25 |
| Numerical study of vibrational characteristic of multilyer carbon nanotubes and nanocomposites consisting of monolayer structure and polymer matrix | saleh kazemi | M.Sc. | Abolbashari | 2016-08-29 |
| Modeling and optimization of Trombe wall for the climate of Yazd | ali baziari | M.Sc. | Kianifar | 2016-07-11 |
| Experimental study of methane-air flame in the multi nozzles branched burner features and determine the most effective geometrical parameters and its impact on the total irreversibility exhaust | Hamideh Sheikhani | P.H.D. | Ajam | 2016-08-02 |
| An enhancement in cavitator shape for cavitating flows from hydrodynamic forces point of view | ramin fadaei rodi | P.H.D. | Pasandidehfard | 2016-08-31 |
| Design and construction of a quadrotor with existing facilities | Mehran Baghbani | M.Sc. | Moavenian | 2016-10-24 |
| Fault Tolerant Control Design Scheme for Vehicle Dynamics Control | Mohammad Yadollahi | P.H.D. | Moavenian | 2015-11-13 |
| Experimental Study of Particle Diameter of Nanostructured Coating on the Pool Boiling Heat Transfer | Nima Tinati | P.H.D. | Abolfazli Esfahani | 2016-11-17 |
| Experimental and numerical study of the effect of water waves on the vibration of bristol oscillating systems | amir reza moghiman | P.H.D. | Farshidianfar | 2017-02-22 |
| Trajectory Generation Of Exoskeleton Robots Based On Human Walking Gait | mahnaz khosrojerdi | M.Sc. | Akbarzadeh Tootoonchi | 2017-09-25 |
| Distributed-Lumped Dynamic Modeling and Vibration Control of Flexible Arm | Yasaman Vaghei | P.H.D. | Farshidianfar | 2017-05-23 |
| Investigating the effect of direct heating of natural gas on soot formation, flame temperature, luminosity and emissions: A Combined Experimental and Numerical Approach | Mohammad Jalilimehr | P.H.D. | Moghiman | 2017-12-21 |
| Experimental investigation on the effect of PCM on operation of solar chimney | Ehsan Shabahang | P.H.D. | Ghazikhani | 2017-08-19 |
| An investigation on the effect of notch on fatigue and failure properties of graphene nanoplatelets/epoxy composites | Mohammad Nickrafat | M.Sc. | Shariati | 2018-02-24 |
| Experimental study of the aerodynamic forces of the wings with Sinusoidal Leading Edges near the Ground at low Reynolds number | abbasali mehraban emroz | P.H.D. | Djavareshkian | 2018-01-16 |
| Three-dimensional investigation of flow and heat transfer of a compressible fluid between two rotating horizontal cylinders | Sayyid mostafa hosseini | M.Sc. | Bradaran Rahimi | 2018-05-28 |
| energy economic analysis and modeling on-grid solar power plant by Homer in top ten countries with most energy consumption | Nima Mejrisazan Toosi | M.Sc. | Abolfazli Esfahani | 2018-05-14 |
| Automatic control of quadcopter by deep learning | Ehsan Akbaritabar | M.Sc. | Moavenian | 2018-06-11 |
| Experimental investigation on capacity and stability of methane premixed flame with variation of swirl number and the amount of added hydrogen | Mahdi Pourramezan | P.H.D. | Ajam | 2018-07-15 |
| Adaptive control strategy to assist a lower-limb assistive Exo based on the user-ability | Somayye Noruzi | P.H.D. | Akbarzadeh Tootoonchi | 2018-08-02 |
| Modeling and analysis of Lamb wave propagation in composite structures using semi-analytical finite element method | elyas mirzaee | P.H.D. | Rezaee Pazhand | 2018-07-04 |
| Investigating the effect of temperature difference of pinch point on thermal efficiency and efficiency of the second law of combined cycle of gas power plant | masoud sahebi | M.Sc. | Ghazikhani | 2018-09-10 |
| Investigation of Energy and Exergy of Water-Ammonia Rankin Cycle by Considering Photovoltaic driven and Pinch Temperature changes | mohammad hassan tavasoli khah | M.Sc. | Ghazikhani | 2018-10-08 |
| Experimental study of the wave-escape edge of a wing on the aerodynamics of the flapping in the hovering and forward flights | mostafa mohammadi | M.Sc. | Djavareshkian | 2018-11-05 |
| Optimization of Nishabour Combined Cycle Power Plant Heller Cooling Towers | hesam pashaee marandi | M.Sc. | Abolbashari | 2019-09-02 |
| Design improvement of tricone drill bits by changing the geometric parameters in accordance with the conditions of the southwest formation of IRAN | HASSAN MOHAMMADI MAJD | P.H.D. | Hassani | 2018-11-14 |
| Investigating the injection of water or steam into the diesel engine to reduce black sodium and oxide nitrogen using the AVL FIRE software | Mohammad Sobhani | M.Sc. | Ghazikhani | 2018-12-10 |
| Numerical analysis of Buzz phenomenon at supersonic intakes and proposing a method to eliminate it | ali baratian ghorghi | P.H.D. | Pasandidehfard | 2018-10-22 |
| Numerical Investigating of Two-Dimensional Aeroelastic Behavior in Unsteady Flow Around Flexible Oscillatory Airfoil | Mohamad Reza Saber | P.H.D. | Djavareshkian | 2019-02-19 |
| Topology Optimization of Flow Domain for a Micro-Mixer using Lattice Boltzmann Method | Zahra Talebpour | P.H.D. | Niazmand | 2019-06-19 |
| Experimental and Theoretical Analysis of Metastructures With Piezoelectric Elements for Vibration Suppression and Energy Harvesting | Arman Mohsenzadeh | P.H.D. | Afsharfard | 2019-07-22 |
| Experimental and Numerical Investigation of Vibration on Heat-Transfer of the Porous Cavity Filled with Phase Change Material | Seyyed Ali Naghedifar | P.H.D. | Moghiman | 2019-04-24 |
| Numerical analysis of Hunter turbine and consideration of blades deformation on its performance in water flow | Bahare Kazemi | M.Sc. | Pasandidehfard | 2019-10-07 |
| Geometric optimization of the mounting blade on the outer surface of the inner tube rotating a three-dimensional horizontal two-tube converter | JAVAD TORKANLOO | M.Sc. | Bradaran Rahimi | 2019-11-04 |
| Modeling of 3D multiComponent Capillary flow using the Color Gradient method | Ehsan Fathi | P.H.D. | Maghrebi | 2019-09-22 |
| Elasto-plastic analysis and stress wave propagation in plates under impact loading using isogeometric method | noushin nasabizadeh | P.H.D. | Jaamialahmadi | 2019-09-19 |
| Numerical and experimental investigation of the effect of using heat pipe on improving the cooling system of oil transformer | Fateme Tavakoli dastjerd | P.H.D. | Niazmand | 2020-05-05 |
| Study of developed boundary layer of a rotating jet impinging on a rigid surface | Mahsa Sharafi | M.Sc. | Bradaran Rahimi | 2020-05-11 |
| Analytical and numerical investigation of flow and heat transfer from rotating cylinder around horizontal axis floating in stationary Newtonian fluid | Edris Torshizi | P.H.D. | Bradaran Rahimi | 2020-10-01 |
| Numerical simulation of nasal airflow in patients suffering from nasal obstruction, before and after septorhinoplasty | hamedreza kafash | P.H.D. | Bradaran Rahimi | 2020-10-27 |
| Investigation of current and heat transfer of compressible current of a mixture of electrically conductive fluids in a vertical cylindrical annulus with movable walls | saeed rezaeian | P.H.D. | Bradaran Rahimi | 2020-11-04 |
| Discussing The Application of Using Hydrophilic Fibers in A Multi-stage Passive Solar Distillation System Insulated with Aerogel: An Experimental Study | razieh akhlaghi ardekani | P.H.D. | Kianifar | 2020-10-13 |
| Numerical analysis of flow over Naca 0012 airfoil with porous media at different Reynolds | Masoud Sedigh poor | M.Sc. | Pasandidehfard | 2020-09-29 |
| Improving the microchannel manufacturing process used in helical separators | nima mirblouki | M.Sc. | Elhami | 2020-12-14 |
| Stagnation-point flow and heat transfer of an in-compressible and compressible fluid on a rotating disk | mahdi arabikhan | P.H.D. | Bradaran Rahimi | 2021-01-19 |
| Assist control of FUM exoskeleton robot based on assist as needed algorithm | Samane Amini | P.H.D. | Akbarzadeh Tootoonchi | 2021-01-30 |
| Numerical investigation of supercritical oscillations in a mixed compression supersonic air intake | Mohamad Salehifar | P.H.D. | Sepahi-Younsi | 2021-04-12 |
| Optimal design of thermal-hydraulic performance of fluid flow in curved pipe with radial fins | amin ghaemian | P.H.D. | Maghrebi | 2021-03-18 |
| Investigation of optimal thermohydraulic performance of flow inside inner-grooved pipe equipped with twisted conical strip insert | Mehran Yazdani | P.H.D. | Passandideh-Fard | 2021-04-15 |
| Derivation of a Symmetrized and Simplified Bernoulli Trial Collision Scheme in Direct Simulation Monte Carlo (DSMC) and its Evaluation | Elmira Taheri | P.H.D. | Roohi | 2021-07-20 |
| Development of new Hybrid Collision Algorithm and its Implementation in DSMC Solvers and It’s Evaluation in Rarefied Gase flow | Vahid Shahabi | P.H.D. | Roohi | 2021-08-10 |
| Improvement of Nietsche method in geometric optimization of steady two-dimensional conduction heat transfer using isogeometric method | Ali Jafarzadeh | P.H.D. | Ayani | 2021-09-16 |
| Design, fabrication and experimental study of the performance of the solar still with sliding absorber plate and equipped with air stone and wave maker | masoud sobhani | P.H.D. | Ajam | 2021-08-31 |
| Numerical Simulation of Piezoelectric Harvester on Trailing edge of Airfoil and effect of Ground Clearance on the Aerodynamic Performance of Fixed-wing Micro Aerial Vehicle | Fatemeh Lotfabadi | M.Sc. | Esmaeili | 2021-10-10 |
| numerical and experimental study of humidity,forced and natrual ventilation on flashover phenomenon behaviour on fire compartment | seyed ahmad kebriyaee | P.H.D. | Moghiman | 2021-08-31 |
| Three Dimensional Topology Optimization and Material Distribution for Additive Manufacturing | Nima Yaghoobi Bajmae | P.H.D. | Abolbashari | 2021-12-23 |
| Fuzzy Impedance Control of Knee Rehabilitation Robot to Simulate Physiotherapy Exercises in Water | Mohammad EntekhabShahabi | M.Sc. | Akbarzadeh Tootoonchi | 2021-01-04 |
| Energy and economic analysis and investigation of control operation strategies of absorption-compression hybrid chiller plant with energy storage | Navid Moghaddas Zadeh | P.H.D. | Farzaneh-Gord | 2022-01-11 |
| Design and implementation of time-independent assistive control based on hip trajectory for patients with unilateral movement disorder using lower limb exoskeleton robot | Mostafa Mogharabi | P.H.D. | Akbarzadeh Tootoonchi | 2022-01-31 |
| Numerical simulation of thermal energy storage in a three concentric cylinder with multi PCM | MohammadAli Golneshan | M.Sc. | Abolfazli Esfahani | 2022-03-02 |
| Dynamic and vibrational analysis of multi-span beams with unequal lengths and under railroad moving loads | Sima Sobhanirad | P.H.D. | Hassani | 2022-02-08 |
| Simulation of combined compression refrigeration cycle and investigation of factors affecting system performance with aspen plus software | abolfazl esmaili | M.Sc. | Ajam | 2022-03-02 |
| Mechanical and Physical Characterization of a Mushroom Biocomposite Material based on Lignocellulosic Pulm Wastes | Amirreza Kaffash | M.Sc. | Yousefsani | 2022-04-25 |
| Design, fabrication and experimental characterization of a microfluidic droplet generator on a chip by using two parallel diaphragm micropumps | Haniyeh Rasooli | M.Sc. | Passandideh-Fard | 2022-05-16 |
| An investigation to the severe plasticity of titanium using CGP method | Peyman Rasekh | M.Sc. | Kadkhodayan | 2022-05-30 |
| Vibration analysis of taperd bi-directional functionally graded porous tapered nano beams using size dependent theories rotary micro/nano-beams | Sayed Mohammad Kazem Ohab-Yazdi | P.H.D. | Kadkhodayan | 2022-06-01 |
| Energy and exergy analysis and determination of energy consumption intensity of steel production in Khuzestan Steel Complex | mohammad sadegh ghasemi nosrat abadi | M.Sc. | Farzaneh-Gord | 2022-06-20 |
| Laboratory investigation of biogas production from spent coffee grounds using an anaerobic digester tank | Amirreza Yousefian | M.Sc. | Farzaneh-Gord | 2022-07-04 |
| Measurement and Analysis of Motor Immobility in Post-Stroke Patients Using Inertial Measurement Sensors | Amir Sadeghi | M.Sc. | Akbarzadeh Tootoonchi | 2022-05-30 |
| A numerical study of the first carpometacarpal joint of human hand with magnetic implant | Amir Hossein Heidarian Loghmani | M.Sc. | Akbarzadeh Tootoonchi | 2023-06-19 |
| Experimental investigation of the effect of adding processed leather on the physical and mechanical properties of PVC | Mohammad Rasoul Mirzaei | M.Sc. | Tahani | 2022-11-07 |
| Optimizing sinusoidal fin geometry of a thermal storage with phase change material | Ali Tavakoli | M.Sc. | Farzaneh-Gord | 2022-10-17 |
| Evaluation of Accuracy and Stability of Shan-Chen LBM Simulation of Two Phase Flows in a 2D Channel with Various Density Ratios | Tohid Amirpanah | M.Sc. | Ajam | 2022-10-03 |
| Simulation and analysis of energy absorbing mechanism in woodpecker\\\'s head under impact using LS-DYNA | Sara Nazariyan | M.Sc. | Yousefsani | 2022-02-21 |
| Design of a knee joint moment estimation observer for movement on flat surface and on stairs using dynamic model of constrained human body | Mohsen Tatari | M.Sc. | Akbarzadeh Tootoonchi | 2022-12-12 |
| Numerical study of heat transfer inside the pipe with lateral injection in order to increase the thermal efficiency | Morteza Hosseini Masoom | M.Sc. | Ayani | 2022-07-04 |
| Assistive control of a hip joint exoskeleton robot based on adaptive admittance control to assist walking | Mohadeseh Shafie Tali | M.Sc. | Akbarzadeh Tootoonchi | 2022-12-12 |
| The Effect of CGP Process on Micro Deep Drawing Characteristics of Thin Copper Sheet | Mahdi Ahmadi Yegane | P.H.D. | Kadkhodayan | 2022-11-02 |
| Productivity Augmentation of solar still by cooling chamber and water pipe coated by Nanoparticles | ZAINAB MAJEED SHARBA | P.H.D. | Abolfazli Esfahani | 2022-12-14 |
| Numerical investigation on role of a circular deflector with splitter blades on performance of Savonius turbine | Seyed Rasoul Hosseini | M.Sc. | Maghrebi | 2022-12-12 |
| Hyperelastic Characterization of Brain White Matter Constituents under Combined Compression-Tension | Mahdi Ziaee Moghaddam | M.Sc. | Yousefsani | 2022-12-26 |
| Parameter Identification, Process Optimization, and Laboratory Production of Precipitated Calcium Carbonate | Mohammad Zohoor | M.Sc. | Yousefsani | 2023-02-06 |
| Design, construction and experimental study of oscillating heat pipe and its application in transformer | Sajjad Shourestani | M.Sc. | Kianifar | 2022-11-21 |
| Effects of installed rods with regular polygone section having equal hydraulic diameter on savonius wind turbine | Ali Ahmadi Moghadam | M.Sc. | Maghrebi | 2022-12-26 |
| Flexo-electric/magnetic effect on size-dependent stability of magnetoelectric micro-nanostructures | Hamed Momeni-Khabisi | P.H.D. | Tahani | 2023-01-08 |
| Real-time Control of Assistive Hip Exoskeleton Robot Using Muscle Synergy Analysis and Torque Estimation based on Deep Learning | Saeed Vahdani | M.Sc. | Kardan | 2022-12-26 |
| An investigation of the effect of acoustic noise generation and transmission on the flow rate of subsonic gas in the pipe using numerical and experimental methods | Hossein Moin | P.H.D. | Passandideh-Fard | 2022-09-20 |
| Thermal stress wave propagation analysis for nano Functionally Graded Piezoelectric Material -FGPM- beam in generalized Vlasov Foundation | Amirhossein Karamooz | M.Sc. | Abolbashari | 2023-01-15 |
| Interlayer Stress Analysis of Adhesive Joints using Extended Kantorovich Method | Mohsen Shayesteh Zeraati | M.Sc. | Tahani | 2023-01-15 |
| An optimal control approach for the identification of the contact model between the FUM-HEXA exoskeleton robot and the user\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | mersad hafife saberi | M.Sc. | Akbarzadeh Tootoonchi | 2022-03-07 |
| Investigating and improving the controllability of a positioning flexure mechanism | alireza heidarian mehr | M.Sc. | Moeenfard | 2023-01-15 |
| Numerical study of energy harvesting from vortex shedding induced behind circular cylinder by piezoelectric | Shiva Sharifi | M.Sc. | Esmaeili | 2023-01-29 |
| Investigating the effect of simultaneous use of oxide nanoparticles and ultrasonic vibration in Gas Tungsten Arc Welding | Mohammad Naser Sadraee Far | P.H.D. | Kolahan | 2023-02-15 |
| Investigating the static strength and fatigue life of defective adhesive joints containing graphene and carbon nanotubes | BEHNAM JAVDAN | M.Sc. | Shariati | 2023-01-15 |
| Simulation of the mixing of two fluids in the microfluidic system with the suggested design of overlapping rhombuses | Mohammad Naderi | M.Sc. | Teymourtash | 2022-12-26 |
| Numerical Modeling of cooling of surfaces with high thermal flux | Amirhossein Kholghi | M.Sc. | Niazmand | 2023-04-10 |
| Analysis of the dolphin dorsal fin turbulator in a heat exchanger by hybrid CFD-AI approach | Iman Bashtani | P.H.D. | Abolfazli Esfahani | 2023-04-15 |
| Energy exergy and economic analysis of the use of near surface geothermal energy and compression chillers for cooling the building | Ameer ALQAZZAZ | P.H.D. | Farzaneh-Gord | 2023-01-31 |
| Investigating the effect of cooling on the shock wave inside a gas turbine blade | Sajedeh Azizi Goodarzi | M.Sc. | Djavareshkian | 2023-04-10 |
| Numerical investigation of the freezing effect on a UAV wing without a winglet and with a winglet at low Reynolds | Samane Zargar Ghochane | M.Sc. | Djavareshkian | 2023-04-10 |
| Effects of Different Degrees of Carotid Artery Stenosis on Local Hemodynamic Parameters in a Patient-Specific Model by Choosing the Suitable Model for the Artery Wall | Amin Mojarab | P.H.D. | Ajam | 2023-02-25 |
| Technical and economic analysis on solar absorption chillers with ground source cooling system and energy storage tank | Mostafa Khodaee Ranjbar | M.Sc. | Farzaneh-Gord | 2023-03-13 |
| Topology optimization and formulation of flexures with small deformations | Qaem Maloonezhad Absardi | M.Sc. | Hassani | 2023-05-01 |
| Using soil as photo absorber for solar steam and electricity generation | Mohammad Derayatifar | M.Sc. | Niazmand | 2023-05-01 |
| Study on the tool wear of the machining process using textured tool | ُshayan Khajegi | M.Sc. | Elhami | 2023-05-20 |
| Simulation of the effect of micro vortex generator on film cooling over a stator | Amine Suwari | M.Sc. | Roohi | 2023-06-13 |
| Aerodynamics modelling of a sample car with active flow control techniques | Mahdi Kheirkhah | M.Sc. | Roohi | 2023-07-03 |
| Numerical simulation of the effect of firefighting positive pressure ventilation fans on fire extinguishing, smoke evacuation, and emission control in the subway station | Fatemeh Safamanesh | M.Sc. | Niazmand | 2023-07-17 |
| Analysis and Investigation of thermal separation of binary mixture using DSMC and machine learning | Ali Lotfian | P.H.D. | Roohi | 2023-07-09 |
| Investigating the Effect of modified Leather on Physical-Mechanical Properties of Polyester Resin | Ali Radmard | M.Sc. | Tahani | 2023-08-30 |
| Nonlinear dynamic analysis of a new flexure mechanism with linear motion | Seyed Amir Alavi Mehr | M.Sc. | Moeenfard | 2023-05-29 |
| study effect of jet fan on sprinkler function | Amirhossein Salari | M.Sc. | Abolfazli Esfahani | 2023-09-11 |
| Design and optimization of the wing fence of a lambda-shaped aircraft | Mohammad Hossein Moghimi Esfand Abadi | M.Sc. | Djavareshkian | 2023-09-18 |
| parametric study and numerical simulation of flow field, temperature, and humidity for the air conditioning process of solar greenhouse system with underfloor heating | mohadeseh najimi | M.Sc. | Moghiman | 2023-09-18 |
| Modeling of micro-positioning system made of compliant joints with shape-memory alloys actuator | Samane Rasooli | M.Sc. | Fathi | 2022-09-07 |
| Numerical study of thermal performance of geothermal heat exchangers with same length in horizontal and vertical configuration assuming layered soil in Various Spiral, Circular, and helical Arrangements | Mohammad Ali Mansouri | M.Sc. | Maghrebi | 2023-10-30 |
| Investigation and Improvement of the Performance of All-Speed AUSM Numerical Family schemes | adnan mohammadi | P.H.D. | Djavareshkian | 2023-11-06 |
| Analysis of random vibrations in a single-axis flexible mechanism with limited motion error | Ali Kaffash | M.Sc. | Moeenfard | 2023-10-16 |
| Statistical analysis and optimization of the input parameters of active TIG welding with micro materials on the mechanical properties of stainless steel | seyed moein fareghi | M.Sc. | Akbari | 2023-10-23 |
| Perforated ellipse louvered strip effects on thermal behavior of heat pipes | Sajjad Soltani | M.Sc. | Abolfazli Esfahani | 2023-11-13 |
| The correction and utilization of nacelle-mounted LIDAR data on horizontal-axis wind turbine, as well as presentation of a power control solution | Mohammad Khezri Gharechah | M.Sc. | Maghrebi | 2023-11-13 |
| Investigating of entropy and entropy generation in micro/nano channels using parallelized DSMC code | Reza Arabpour | P.H.D. | Abolfazli Esfahani | 2023-11-11 |
| Experimental study of the effect of manganese on the shape memory behavior of CuAlNi alloy in a controlled a crucible furnace crucible ftmosphere bush furnace | Iman Hosseinpour | M.Sc. | Fathi | 2023-05-20 |
| Modeling of the curved rib in the wall of micro combustion chamber with coupled thermophotovoltaic cells | Amirhosein Shoja | M.Sc. | Abolfazli Esfahani | 2023-11-27 |
| Modeling and optimization of electrical discharge machining parameters using regression approach and Meta heuristic simulated annealing algorithm for Inconel 718 | Dariush Hashemian | M.Sc. | Kolahan | 2023-12-18 |
| Analysis of Cumulative Fretting Fatigue Damage Behavior of Al-2024 Alloy Using Thermography Method | mohammad keshtgar | P.H.D. | Shariati | 2023-11-07 |
| Kinematics and Dynamics Analysis of a 4-DoF Quasi-Serial Palletizing Robot Based on Parallelogram Mechanism and Optimization of Spring and Counterweight Gravity Compensation Mechanisms Implemented for Torque Reduction of Actuators | Amid Gholampour | M.Sc. | Akbarzadeh Tootoonchi | 2024-01-08 |
| Experimental investigation of the thermal performance of the electronic cooling system of impinging jet and spray in comparison with the crossflow system | Moein Hoseinpour | M.Sc. | Niazmand | 2023-10-30 |
| Modeling the effect of using double-layer phase change materials in light walls on improving the annual thermal performance of the building in the climate of Mashhad. | Ali Rezaee | M.Sc. | Kianifar | 2024-01-22 |
| Experimental study of optimization of energy consumption in fruit drying process in microwave dryer under vacuum using response surface method -RSM- | Hassan Hosseini Zarmehry | M.Sc. | Ayani | 2024-01-22 |
| Experimental investigation of aeroacoustic behavior of two tandem airfoils equipped with surface treatments | Jaber Ragani Lamooki | P.H.D. | Pasandidehfard | 2024-01-28 |
| Dynamic analysis of porous bi-directional functionally graded plates under moving loads in two different directions and its application in ships | Alireza Alaei Kia | M.Sc. | Kadkhodayan | 2024-01-29 |
| Experimental Investigation of The failure behavior of Epoxy Structural Adhesive Combined Mode of I and II And The Effect of Nano Particles Additive on The Energy release rates | Amir Abbaspour | M.Sc. | Shariati | 2024-02-19 |
| Improving motion characteristics of a clamped paired double parallelogram using asymmetric reinforced beams | Mohsen Bakhtiari Shahri | P.H.D. | Moeenfard | 2024-03-02 |
| Experimental and numerical investigation of St37 fatigue life using image processing method for different mixed modes | Soroush Amana | M.Sc. | Shariati | 2024-02-26 |
| Study of tool wear in ultrasonic assisted thread machining | Mohammad Davari | M.Sc. | Elhami | 2024-01-29 |
| Computational study of the buzz phenomenon postponing in a supersonic air inlet with parametric study of the MRD method | Sohrab Panahande Taghi Abad | M.Sc. | Sepahi-Younsi | 2024-03-11 |
| Shape optimization of transonic airfoil using neural network and machine learning in different Mach numbers and angle of attack | Reza Rahnama | M.Sc. | Djavareshkian | 2024-04-29 |
Department of Mechanical Engineering
